VTwin & Specific Tools (6)

Specialty Tool — Clutch remover, zinc plated

-€13.45

EBC Specialty Tool — Clutch remover, zinc plated

Aids in unlocking clutch retainer bolts and speeds clutch removal. Simple, quick setup for clutch service.

€27.40 €40.85

Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25, Blue anodized

-€27.07

MOTION PRO Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25,...

Precision crankshaft puller with 25 mm and 40 mm adapters and reversible M10x1.25/M12x1.25 studs for fast, accurate installs.

€76.48 €103.55

-€12.48

EPI Jam Nut Driver — EPI, Silver

Removes and installs the primary clutch jam nut. 3/4" square drive. For professional and home use.

€48.51 €60.99

Countershaft Seal Puller — 29–47 mm, black

-€20.11

MOTION PRO Countershaft Seal Puller — 29–47 mm, black

Removes countershaft seals 29–47 mm without damaging engine cases. Designed for off-road, street and ATV engines.

€56.88 €76.99

-€13.45

EBC Clutch Removal Tool — Clutch remover, zinc plated

Aids in unlocking clutch retainer bolts and speeds clutch removal.

€27.40 €40.85

T-6 Valve Spring Compressor — 24 mm, Blue anodized

-€38.67

MOTION PRO T-6 Valve Spring Compressor — 24 mm, Blue anodized

Quick-release, fully adjustable valve spring compressor compatible with most motorcycle, ATV, UTV, and small engine cylinder heads.

€109.28 €147.95

-€14.78

EBC Specialty Tool — Clutch remover, zinc plated

Helps unlock retainer bolts and speeds clutch removal for faster, safer servicing.

€30.10 €44.88

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€7.96

EPI Clutch Puller — Ski-Doo, Brass

Precision-machined puller for accurate clutch removal. Heat-treated construction for lasting strength. Individually packaged with instructions.

€30.94 €38.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Belt Removal Tool — For Arctic Cat models with Boss secondary clutch, gold

-€1.73

EPI Belt Removal Tool — For Arctic Cat models with Boss secondary...

Tool for opening secondary clutches to remove drive belts on snowmobiles. Easier to use than OEM tools; stores compactly.

€6.68 €8.41

-€79.23

EPI Clutch Bushing Tool Kit — Polaris, Black, Chrome

Tool kit for removing and installing clutch bushings on primary and secondary clutches. Requires piston pin puller 3801-0313 (sold separately). Not compatible with EBS clutches with one- or two-way bearings.

€99.56 €178.79

-€12.59

EPI Piston Pin Puller Tool — Black, Silver

Removes 12–20 mm piston pins without damage; includes 14 mm and 17 mm plungers. Use with clutch bushing installation kit to speed clutch rebuilds.

€26.31 €38.90

-€46.62

EPI Clutch Compression Tool — Polaris, powder-coated

Allows one person to compress clutches for service, remove and install helixes, change springs and perform maintenance.

€58.56 €105.18

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€21.52

EPI Clutch Compression Tool — Can-Am, powder-coated

Single-person tool for compressing clutches, removing and installing helixes, and changing springs during maintenance.

€83.66 €105.18

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€24.24

EPI Clutch Puller — Polaris, Brass

Precision-machined puller engineered for maximum strength; individually packaged with instructions.

€30.45 €54.69

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€10.54

EPI Clutch Holding Tool — Fits Polaris 550 2014–2016, Silver

Secures clutch assemblies for maintenance; fits Polaris 550 2014–2016, CT Tech Powerbloc PB-50/PB-80 and Trailbloc ATV clutches.

€40.99 €51.53

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris 72–present; excl. '11–'12 900 RZR XP 4x4 & '12 900 RZR XP 4 4x4), Blac

-€18.28

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris...

Fits P85 and P90 clutches on select Polaris ATVs and snowmobiles (1972–present). Essential for servicing or rebuilding clutches. Compare to Polaris OEM #2870338.

€51.67 €69.95

-€46.97

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€82.20 €129.17

-€22.20

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85 and P90 clutches, Black

Tool for removing and installing spider nuts on Polaris P85 and P90 clutches. Essential for clutch service and rebuilds; use with part# 3803-0173.

€62.75 €84.95

-€34.75

MOOSE OFFROAD FOUR WHEEL Clutch Puller for Honda ATV — Black

Puller bolt installs in either end; tool has both male and female threads; fits most 4-stroke Honda four-wheelers (see fitment list).

€50.20 €84.95

-€8.61

MOOSE OFFROAD HARD-PARTS Clutch Hub Holder Tool — Zinc plated

Holds clutch hubs, flywheels, gears and sprockets. One side has angled jaws; the other side has two 8 mm spanner pins. Recommended for square-tooth clutch hubs; not for V-groove or half-round styles.

€24.34 €32.95

Clutch Removal Tools for Harley-Davidson — EBC CT701SP, Clutch retainer bolt

-€21.32

EBC Clutch Removal Tools for Harley-Davidson — EBC CT701SP, Clutch...

Aids in unlocking clutch retainer bolts. Speeds clutch removal to reduce service time. Designed for Harley-Davidson clutch retainers. Simple, safe operation when used with proper PPE.

€21.59 €42.91

Clutch Removal Tools for Harley-Davidson — EBC CT703SP, Clutch Retainer Bolt, Each

-€14.13

EBC Clutch Removal Tools for Harley-Davidson — EBC CT703SP, Clutch...

Tool that aids in unlocking clutch retainer bolts and speeds clutch removal for Harley-Davidson motorcycles.

€28.78 €42.91

-€30.04

MOOSE OFFROAD FOUR WHEEL Polaris Water Pump Drive and Rotor Service Tool — Black, Rotor

Tool for removing and installing the water pump drive gear and removing the rotor from the crankshaft.

€84.91 €114.95

shop by category

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

Subcategories

Engine Tools

VTwin & Specific Tools