VTwin & Specific Tools (3)

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€158.86

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€617.77 €776.63

-€12.37

MOOSE OFFROAD FOUR WHEEL Transmission Locking Nut Tool — Silver, fits Polaris Phoenix

Removes locking nut on the transmission output. Fits Polaris Phoenix models.

€22.58 €34.95

Variator Blocking Tool — Silver, Transmission

-€1.98

101 OCTANE Variator Blocking Tool — Silver, Transmission

Locking tool for quick installation and removal of the variator. Ideal for drivetrain work and piston stopping.

€7.68 €9.66

Variator Blocking Tool — Transmission holder, Silver

-€3.08

101 OCTANE Variator Blocking Tool — Transmission holder, Silver

Locking tool for quick variator installation and removal. Ideal for drivetrain and piston stopper work. Prevents piston damage.

€11.94 €15.02

Variator Blocking Tool — Transmission, Silver

-€2.06

101 OCTANE Variator Blocking Tool — Transmission, Silver

Locking tool for quick installation and removal of the variator; protects the piston stopper and simplifies drivetrain work.

€8.00 €10.06

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

Variator Blocking Tool — Transmission, Black

-€2.82

101 OCTANE Variator Blocking Tool — Transmission, Black

Locks the variator for installation and removal. Quick, easy operation; prevents piston damage during maintenance.

€10.94 €13.76

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€5.57

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€6.91 €12.48

-€16.85

PEDRO'S Pro Chain Keeper — 12mm thru axle, yellow

Replaces the rear wheel to hold chain tension during cleaning, storage, or transport; quick one-handed install on QR-style dropouts; removable pulley for 12mm thru axles.

€18.05 €34.90

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

Toothbrush Drivetrain Cleaning Brush — Black, Yellow

-€2.69

PEDRO'S Toothbrush Drivetrain Cleaning Brush — Black, Yellow

Double-ended ergonomic brush for chains, cassettes and derailleurs. Solvent-resistant synthetic handle and bristles. Not for oral use.

€4.53 €7.22

-€113.28

HOT CAMS Metric Cam Installation Kit — Blue

Comprehensive installation kit for camshaft work. Includes degree wheel, dial indicator with long and short reach studs, adjustable magnetic stand, three positive stops (10 mm, 12 mm, 14 mm threads) and a wooden carrying case.

€204.86 €318.14

-€6.70

PEDRO'S Crank Adjuster Cap Driver — Black/Yellow

Precision driver for Shimano Hollowtech II with ergonomic dual-density handle and heat-treated tool steel bit.

€8.34 €15.04

-€33.01

K&L SUPPLY Cam Chain Tensioner Holder — Cam, Black/Silver

Holds the cam chain tensioner during removal and installation. Tabs engage the tensioner slots; knob retracts the tensioner; includes a one-way bearing.

€93.28 €126.29

-€6.89

PEDRO'S Bottom Bracket Wrench II — 16-notch, 44 mm, yellow

Precision laser-cut wrench for 16-notch 44 mm external bottom bracket cups and rotor lockrings. Cushioned grip and stainless steel construction for professional use.

€19.47 €26.36

-€161.53

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€172.92 €334.45

-€10.89

PEDRO'S Universal Crank Remover — Crank tool, Yellow

Universal crank remover for splined Octalink and ISIS Drive cranks; stainless steel and rubber construction.

€15.74 €26.63

shop by category

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

Subcategories

Engine Tools

VTwin & Specific Tools