VTwin & Specific Tools (2)

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€11.26

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€45.45

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€176.75 €222.20

-€26.09

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€101.45 €127.54

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

-€269.21

JIMS Cylinder Torque Plate Kit — 3.937"–4" bore, black

Required when boring or honing late-model aluminum cylinders; simulates running stress; includes instructions; made in the U.S.A.

€760.81 €1,030.02

Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge (0.1875") steel, powder-coated blue

-€33.63

JIMS Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge...

Securely mounts Milwaukee‑Eight Softail engines; fabricated from 7 gauge (0.1875") powder-coated steel for durable use.

€130.80 €164.43

"On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

-€70.30

JIMS "On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

On-bike compressor for removing valve spring keepers, collars, and springs without full teardown; designed for Milwaukee-Eight® engines.

€273.36 €343.66

Professional Fuel Injection Pressure Test Tool — Fuel pressure, Black

-€139.24

JIMS Professional Fuel Injection Pressure Test Tool — Fuel...

Quick in-line fuel pressure testing for Delphi injected models. Performs road and dyno checks efficiently. Includes gauge, hoses, valves, adapter and carrying case. Not for '18-'20 Softails.

€541.45 €680.69

-€14.56

JIMS Socket Dipstick Insert Tool — 760K, Blue, Black, Kit

Easy-install insert for safe dipstick cap removal; lifetime-guaranteed design by Gary Smith; option available with a compatible socket for older bikes.

€56.61 €71.17

-€48.12

JIMS Fuel Pump Retainer Remover Tool — Black

Quick removal and installation of the fuel pump retaining ring. Heavy-duty construction. Made in the USA.

€187.15 €235.27

-€17.48

JIMS Oil Pump Alignment Tool — Black

Designed to help technicians assemble the complete cam chest quickly and accurately. Use with supplied studs or as an assembly with the alignment dowel. Made in the U.S.A.

€67.95 €85.43

-€10.56

JIMS In-Line Spark Tester — Black

Quick, easy visual spark check for all ignition systems; made in the USA.

€41.03 €51.59

-€20.26

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. Fits 12 mm sensors. Made in the USA.

€78.77 €99.03

-€15.25

JIMS Magnetic Tappet Holder — Pushrod application

Holds the tappet securely for preliminary adjustment and prevents engine rotation while pushrods are tight. Verify tappet spins freely before turning the engine.

€59.28 €74.53

-€68.09

JIMS Piston Jet Tester — Blue, PN 730

Clears assembly lubes and verifies jet psi and spray pattern before sealing; does not include piston jet.

€264.80 €332.89

Milwaukee Eight® Stator Adapter Main Bearing Tool — Stator, Black Oxide

-€10.00

JIMS Milwaukee Eight® Stator Adapter Main Bearing Tool — Stator,...

Keeps the stator attached to the left side case during main bearing installation for faster, cleaner service.

€38.95 €48.95

-€39.91

JIMS Fork Leg Holder Tool — 28 mm–2 in, Blue

Mounts in a vise to hold fork legs and tubes securely for hands-free servicing; fits 28 mm–2 in and will not scratch the finish.

€155.20 €195.11

-€11.13

JIMS Primary Lock Bar for M8 Softail — Black oxide

Secures the primary drive for M8 Softail service, ensuring solid engagement between compensator and clutch sprockets for safe maintenance.

€43.28 €54.41

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€19.83

JIMS 3rd Hand Axle Locker Tool — Axle, Silver

One-person tool that holds the wheel shaft steady for belt-tensioning and nut torquing.

€77.13 €96.96

-€36.91

JIMS 5-Speed Shifting Assembly — Silver

Complete shifter assembly that reduces free play and installs with common hand tools. Made in the U.S.A.

€143.52 €180.43

-€28.42

JIMS Steering Head Bearing Race Tool — JIMS, Black

Precision tool removes and installs steering head bearing races on 1984–2016 Big Twin (except 2014–2016 Dressers), 1986–2016 XL and 1994–2002 Buell OEM frames; requires tool driver spacer and handle/driver.

€110.55 €138.97

Motor Stand — For Twin Cam A Motor, Blue, powder-coated

-€31.21

JIMS Motor Stand — For Twin Cam A Motor, Blue, powder-coated

Makes working on motors easier with better access. Made in the USA.

€121.35 €152.56

-€15.00

JIMS Driver Spacer Tool — Steering head, black

Works with a bearing race tool to remove and install bearing races with even, controlled taps.

€58.34 €73.34

shop by category

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

Subcategories

Engine Tools

VTwin & Specific Tools