Handlebars & Controls

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — Riser, 4 Pack, Polished Silver

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary design reduces vibration better than any other riser bushing. Made in the U.S.A. Fits most Harley‑Davidson handlebar riser setups.

€52.84 €71.54

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — Polished silver, 4-pack

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary vibration reduction for a smoother ride
Designed for straightforward installation
Made in the U.S.A.

€52.84 €71.54

Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise, Black Satin

-€32.91

WILD 1 Chubby® Billet Risers — 3-1/2" c-to-c, 1" clamp, 4.5" rise,...

Precision-machined billet risers that fit 3-1/2" center-to-center spacing and work with standard 1" handlebars. Made in the USA.

€103.85 €136.76

-€71.87

WILD 1 [object Object]

1-1/4" Chubby® Handlebar — 25% thicker than stock, precision-machined at control mounts, compatible with hydraulic clutches, Throttle-By-Wire and H-D® heated grips; not for 883C/1200C or '24 Road Glide/Street Glide models.

€279.49 €351.36

-€42.74

WILD 1 [object Object]

25% thicker, precision‑machined 1-1/4" Chubby® Handlebar with polished welds and diamond knurling. Works with hydraulic clutch, stock and most custom controls. Made in the U.S.A. Not compatible with 883C/1200C riser/clamp or '24 Road Glide/Street Glide.

€166.20 €208.94

-€71.87

WILD 1 [object Object]

25% thicker, precision-machined 1-1/4" Chubby® Handlebar. Works with Throttle-By-Wire and most controls. Made in the U.S.A. Not for use on 883C/1200C or '24 Road Glide/Street Glide models.

€279.49 €351.36

1-1/4" Chubby® Handlebar — 1-1/4" diameter, 33" width, 14" rise, Satin black

-€90.56

WILD 1 1-1/4" Chubby® Handlebar — 1-1/4" diameter, 33" width, 14"...

Precision-machined 25% thicker handlebars with fluid bends for improved comfort and control. Compatible with Throttle-By-Wire and most controls; check model exclusions.

€352.17 €442.73

1-1/4" Chubby® Bagger Handlebar — 1-1/4" (32 mm) dia, 34-1/2" (87.5 cm) width, 8-1/2" (21.5 cm) rise, Chrome

-€71.87

WILD 1 1-1/4" Chubby® Bagger Handlebar — 1-1/4" (32 mm) dia, 34-1/2"...

Thicker-than-stock Chubby® Bagger handlebar with precision-machined control mounts, fluid bends for comfort, polished welds and diamond knurling. Works with hydraulic clutch, most controls and Throttle-By-Wire. Made in the U.S.A. Not for use on specified models.

€279.49 €351.36

-€13.02

ALLOY ART Heavy-Duty Handlebar Riser Bushings — Polished silver

Eliminates handlebar sloppiness and isolates vibration. Durable, precision-fit components — made in the USA.

€36.81 €49.83

-€13.02

ALLOY ART Heavy-Duty Handlebar Riser Bushings — Polished Silver, Set

Precision-engineered riser bushings reduce handlebar play and vibration for improved control and comfort.

€36.81 €49.83

Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome, Riser, Kit

-€20.59

ALLOY ART Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit —...

Complete kit with poly bushings, riser studs, mounting bolts and billet inserts. Made in the USA.

€58.18 €78.77

-€20.59

ALLOY ART Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

Complete kit includes poly bushings, riser studs, mounting bolts and billet inserts. Made in the USA.

€58.18 €78.77

1-1/4" Chubby® Handlebar — 1-1/4" diameter, 36" width, Satin Black

-€113.54

WILD 1 1-1/4" Chubby® Handlebar — 1-1/4" diameter, 36" width, Satin...

Chubby® handlebar with 25% thicker tubing than stock, precision-machined control mounts, fluid bends for comfort, and Throttle-By-Wire compatibility. Not for use on 883C/1200C or '24 Road Glide/Street Glide models.

€441.52 €555.06

1-1/4" Chubby® Bagger Handlebar — 36-1/2" width, 1" clamp, satin black

-€110.67

WILD 1 1-1/4" Chubby® Bagger Handlebar — 36-1/2" width, 1" clamp,...

Precision-machined, thicker Chubby® bagger handlebar engineered for improved comfort and control. Compatible with hydraulic clutch and most controls; not compatible with 883C/1200C or '24 Road Glide/Street Glide.

€430.39 €541.06

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€22.87
Out of Stock

ALLOY ART Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

Includes poly bushings, riser studs, mounting bolts and billet inserts. Made in the USA. Easy drop-in installation.

€64.64 €87.51

-€68.99
Out of Stock

WILD 1 [object Object]

Precision-machined 1-1/4" Chubby® Handlebar with 25% thicker tubing for improved comfort and control. Compatible with Throttle-By-Wire and H-D® heated grips. Not compatible with 883C/1200C or '24 Road Glide/Street Glide models.

€268.31 €337.30

1-1/4" Chubby® Handlebar — 1-1/4" diameter, 1" clamp, 12" rise, 33" width, Black Satin

-€87.68
Out of Stock

WILD 1 1-1/4" Chubby® Handlebar — 1-1/4" diameter, 1" clamp, 12"...

Precision-machined Chubby® handlebar with thicker tubing and fluid bends for improved comfort and control; compatible with hydraulic clutch, H-D® heated grips and Throttle-By-Wire.

€340.98 €428.66

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13, 3" length, Chrome

-€20.44
Out of Stock

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-13, 3"...

Clean-install riser bushing kit featuring Gooden Tight™ bushings, flathead bolts and billet washers. Made in the USA.

€57.75 €78.19

Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20, 3" length, Chrome

-€20.44
Out of Stock

ALLOY ART Gooden Tight™ Custom Handlebar Riser Bushing Kit — 1/2-20, 3"...

Complete riser bushing kit with flathead mounting bolts and cup washers for a concealed, factory-style finish.

€57.75 €78.19

1-1/4" Chubby® Handlebar — 36" width, 14" rise, 1" clamp, Satin black

-€113.54
Out of Stock

WILD 1 1-1/4" Chubby® Handlebar — 36" width, 14" rise, 1" clamp,...

Thicker, precision-machined handlebar engineered for comfort and control. Polished welds and diamond knurling; works with Throttle-By-Wire and H-D® heated grips. Not compatible with certain 883C/1200C and '24 Road Glide/Street Glide setups.

€441.52 €555.06

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls