Handlebars & Controls

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€47.38

YSS Fork Kit — Silver

Replacement fork kit components for suspension repair and rebuilding.

€134.03 €181.41

-€52.67

YSS Fork Kit — Black, Y-SD-KIT-05-004

Replacement fork kit parts to restore fork performance and damping consistency; for use in service and repair.

€149.01 €201.68

-€18.26
New

Handlebar Clubstyle Performance — 83 cm, Black

Club-style handlebar with conical clamp reduction, 6061 T6 aluminum construction and reinforced riser clamping for improved stability and OEM HD compatibility.

€182.58 €200.84

-€20.55
New

HNDLBR Clubstyle Performance Handlebar — 85 cm width, 11.2 cm...

Suitable for mounting OEM HD grip fittings, levers and grips; Rick's "Good Guys" preferred. Clamping area 1 1/4" (31.8 mm) conically reduced to 1" (25.4 mm) outside. 25% more stability than other manufacturers. 3.6 mm wall thickness in riser clamping area. Compatible with HD heated grips.

€205.50 €226.05

-€15.21
New

HNDLBR CLUBSTYLE PERFORMANCE — 77 cm (30.25 in), black

Clubstyle handlebar with OEM grip compatibility, enhanced stability and reinforced riser clamping.

€152.02 €167.23

-€16.73
New

Handlebar Clubstyle Performance — 81 cm width, 82 mm height,...

Premium club-style handlebar engineered for stability and precise control. Compatible with OEM HD grip fittings, levers and heated grips; 6061 T6 aluminum construction.

€167.30 €184.03

-€19.02
New

Handlebar Clubstyle Performance — 83 cm width, 11.2 cm height,...

Clubstyle riser handlebar with conical clamp reduction and 25% increased stability. Compatible with OEM HD fittings and HD heated grips. Ideal for use with Rick's "Good Guys" grips.

€190.22 €209.24

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls