Handlebars & Controls

-€38.37

BURLY BRAND [object Object]

Narrow 1" bottom Ape Hanger handlebar in high-quality steel with 3-1/2" on-center knurling; slotted and drilled for internal wiring (not notched for Throttle-By-Wire).

€149.20 €187.57

-€38.37

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar — steel tubing with 3-1/2" on-center knurling; slotted and drilled for internal wiring (not notched for Throttle-By-Wire). Narrow center/tapered design for narrow glide front ends.

€149.20 €187.57

1-1/4" V-Line Handlebar — 1-1/4" clamping diameter, 30-1/2" width, black powder coat

-€84.08

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamping diameter, 30-1/2"...

Seamless DOM mild steel, drilled for internal wiring, notched for throttle-by-wire. Made in the U.S.A.

€326.99 €411.07

1-1/4" V-Line Handlebar — 35-1/2" width, 6-1/2" rise, Black powder-coated

-€86.46

TRASK 1-1/4" V-Line Handlebar — 35-1/2" width, 6-1/2" rise, Black...

Seamless DOM mild steel construction; available in black powder coat or chrome. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€336.24 €422.70

-€78.75

BURLY BRAND 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4", 15" rise, 11-1/2"...

High-bar styling for baggers; CNC-bent to clear gauges and speakers; dimpled and pre-drilled for internal wiring; notched for throttle-by-wire; requires longer cables; not for use with heated grips.

€306.20 €384.95

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 29" width, 10"...

Responsive handling position with comfortable ergonomics; slotted for internal wiring, crowned for throttle-by-wire systems. Some models may require longer cables and will not fit integrated lower clamp designs.

€246.60 €310.01

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm diameter, 29" width, 10" rise,...

Responsive handling position with a stepped tube for stock controls; laser-cut and slotted for internal wiring; crowned for fly-by-wire throttles.

€246.60 €310.01

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€36.99

BURLY BRAND Bikini Beach Bar Handlebar — 34.5 in width, 1 in clamp, 4.5 in...

Retro '40s bikini beach bar handlebar with knurled center and high-polish chrome finish. Pre-drilled for easy installation.

€143.84 €180.83

-€52.84

BURLY BRAND [object Object]

1-1/4" handlebar with tapered hand control area, 1" clamping section dimpled and drilled for internal wiring. May require extended cables, brake line, and wiring.

€205.50 €258.34

-€59.12
Out of Stock

BURLY BRAND [object Object]

1-1/4\" handlebar with tapered hand-control area and a 1\" dimpled, drilled clamp for internal wiring. May require extended cables or brake lines.

€229.89 €289.01

-€34.46
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar constructed from high-quality steel tubing; slotted and drilled for internal wiring; narrow center/tapered profile for narrow glide front ends.

€134.01 €168.47

-€38.37
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar: high-quality steel tubing with 3-1/2" on-center knurling, slotted and drilled for internal wiring (not for Throttle-By-Wire). Narrow center/tapered design for narrow glide front ends.

€149.20 €187.57

-€34.46
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar in high-quality steel; slotted for internal wiring, not notched for Throttle-By-Wire, designed for narrow glide front ends.

€134.01 €168.47

-€34.46
Out of Stock

BURLY BRAND [object Object]

Durable 1\" Narrow Bottom Ape Hanger handlebar in high-quality steel with 3-1/2\" on-center knurling, slotted for internal wiring; not notched for Throttle-By-Wire.

€134.01 €168.47

-€39.94
Out of Stock

BURLY BRAND [object Object]

1" Scrambler Handlebar that raises reach slightly for most H-D models, allows reuse of stock cables and brake lines, and is drilled for internal wiring (not notched for Throttle-By-Wire).

€155.11 €195.05

-€42.96
Out of Stock

BURLY BRAND [object Object]

Moderate-rise 1" Scrambler handlebar: improves road stance, reuses stock cables and brake lines, drilled for internal wiring; not notched for Throttle-By-Wire.

€167.09 €210.05

1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2" rise, Chrome

-€92.58
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2"...

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€360.06 €452.64

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 32-1/4" width, Black powder-coated

Seamless DOM mild steel construction with black powder coat or chrome finish. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

-€71.83
Out of Stock

BURLY BRAND 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

High-rise bagger ape hanger with CNC-bent curves; dimpled for internal wiring, notched for Throttle-By-Wire; requires longer cables; not for heated grips.

€279.34 €351.17

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls