Handlebars & Controls

1-1/4" V-Line Handlebar — 1-1/4" clamping diameter, 30-1/2" width, black powder coat

-€84.08

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamping diameter, 30-1/2"...

Seamless DOM mild steel, drilled for internal wiring, notched for throttle-by-wire. Made in the U.S.A.

€326.99 €411.07

1-1/4" V-Line Handlebar — 35-1/2" width, 6-1/2" rise, Black powder-coated

-€86.46

TRASK 1-1/4" V-Line Handlebar — 35-1/2" width, 6-1/2" rise, Black...

Seamless DOM mild steel construction; available in black powder coat or chrome. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€336.24 €422.70

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€55.58

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€59.50 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2" rise, Chrome

-€92.58
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2"...

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€360.06 €452.64

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 32-1/4" width, Black powder-coated

Seamless DOM mild steel construction with black powder coat or chrome finish. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, powder-coated black

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width,...

Seamless DOM mild steel handlebar with black powder coat or chrome finish. Pre-drilled and notched for internal wiring and throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

Polyurethane Riser Bushing Kit — Black, Gloss

-€12.12
Out of Stock

PRO-ONE PERF.MFG. Polyurethane Riser Bushing Kit — Black, Gloss

Complete riser bushing kit reduces handlebar slop and vibration. Includes CNC billet aluminum caps and all hardware for installation.

€34.27 €46.39

Polyurethane Riser Bushing Kit — Red gloss, P/N 103070R

-€12.12
Out of Stock

PRO-ONE PERF.MFG. Polyurethane Riser Bushing Kit — Red gloss, P/N 103070R

Complete riser bushing kit with polyurethane bushings, CNC billet caps, four washers and two steel inner sleeves.

€34.27 €46.39

Polyurethane Riser Bushing Kit — Silver, Raw

-€9.10
Out of Stock

PRO-ONE PERF.MFG. Polyurethane Riser Bushing Kit — Silver, Raw

Complete handlebar mount bushing kit that reduces slop and vibration; includes bushings, washers and inner sleeves.

€25.69 €34.79

Polyurethane Riser Bushing Kit — Riser, Gold gloss

-€14.49
Out of Stock

PRO-ONE PERF.MFG. Polyurethane Riser Bushing Kit — Riser, Gold gloss

Complete set with four durable elastomer bushings, four washers and two inner sleeves to reduce handlebar slop and vibration.

€40.94 €55.43

-€17.36
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Black gloss

Precision CNC-machined bushing kit that removes handlebar slop on tall risers, improving steering feel and fit.

€49.11 €66.47

-€17.36
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Red, gloss

Precision CNC-machined bushings that remove handlebar slop associated with tall risers and complex handlebar setups.

€49.11 €66.47

-€15.50
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Silver, raw finish

CNC-machined billet riser bushings that eliminate handlebar slop for tall riser and custom handlebar setups.

€43.80 €59.30

-€17.36
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Black, Gloss, 103060B

CNC-machined bushings that eliminate handlebar slop on tall riser setups.

€49.11 €66.47

-€17.36
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Red, Gloss

CNC-machined billet bushings that remove handlebar slop with tall risers. Kit for standard riser setups, easy to install.

€49.11 €66.47

-€15.50
Out of Stock

PRO-ONE PERF.MFG. Solid Riser Bushing Kit — Silver, Raw

CNC-machined billet bushing kit that eliminates handlebar slop from tall risers and restores solid steering feel.

€43.80 €59.30

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls