Handlebars & Controls

-€36.61

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€115.54 €152.15

-€36.61

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€142.39 €179.00

-€36.61

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€115.54 €152.15

-€34.57

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€134.43 €169.00

-€40.70

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€128.45 €169.15

-€35.91

PAUL YAFFE BAGGER NATION [object Object]

1" Classic Bagger Ape Handlebar — mandrel-bent 1" seamless steel, notched for electronic throttle, knurled and pre-drilled for internal wiring. Made in the U.S.A.

€139.45 €175.36

-€50.08

PAUL YAFFE BAGGER NATION [object Object]

Durable 1" Classic Bagger Ape handlebar — mandrel-bent seamless steel, notched for electronic throttle and pre-drilled for internal wiring; made in the U.S.A.; requires OEM# 55918-08 clamp for '07 and earlier models.

€141.69 €191.77

-€50.08

PAUL YAFFE BAGGER NATION [object Object]

1" Classic Bagger Ape Handlebar — mandrel-bent 1" seamless steel tubing; notched for electronic throttle; knurled, dimpled and pre-drilled for internal wiring. Made in the U.S.A.

€141.69 €191.77

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 35" width, 14" rise, Black

-€205.91

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 35"...

Hand-crafted to fit touring models. Bars are pre-drilled for easy internal wiring. Works well with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp.

€429.91 €635.82

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" dia, 1" clamp, 36" width, Black

-€130.05

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" dia, 1" clamp, 36"...

Hand-crafted bagger monkey bar handlebar for touring models; pre-drilled for internal wiring; works with one-piece riser clamps for a clean installation.

€505.77 €635.82

1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9" sweep, Black

-€180.81

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9"...

Hand-crafted for touring models; pre-drilled for internal wiring; compatible with Paul Yaffe's Bagger Nation Super Clamp.

€377.48 €558.29

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

Pre-Wired Handlebar — 32 mm clamp, 35.5 cm rise, 90 cm width, Chrome

-€267.69

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm clamp, 35.5 cm rise, 90 cm width,...

Pre-wired handlebar option with internal switch wires and an installed throttle pull wire for easy sensor exchange. Includes all materials and step-by-step installation instructions.

€558.90 €826.59

Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2") width, 40.5 cm (16") rise, Chrome

-€123.53

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2")...

Pre-wired replacement handlebar that preserves the OEM twist grip sensor. Includes internal wiring and connectors; all materials are included for a simple install.

€480.42 €603.95

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€46.57

PAUL YAFFE BAGGER NATION Racing Hand Levers — Hydraulic brake & clutch, pair, chrome

Racing Hand Levers with racing-inspired styling, direct stock replacement, and machined accents for a refined look.

€131.76 €178.33

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12" rise, 1" clamp, 15" center width, Black

-€150.19

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12"...

Hand-crafted touring fit; pre-drilled for internal wiring; designed for one-piece riser clamp compatibility.

€424.92 €575.11

1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

Low, Monkey Bar–style drag handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84–'17 models with 3-1/2" on-center risers.

€435.55 €589.49

-€153.94

PAUL YAFFE BAGGER NATION Monkey Sport Handlebar — 84 cm (33"), 32 mm (1-1/4"), Black

Sport handlebar that improves control and comfort with a natural grip angle and factory slots for internal wiring.

€435.55 €589.49

1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 36" width, 14" rise

-€171.11

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 36" width,...

Low, sleek Monkey Bar style handlebar. Drilled for internal wiring and notched for throttle-by-wire. Fits most '84–'17 models with 3-1/2" on-center risers (excludes Springers, FLT/FLHT, XL 883C/1200C).

€484.11 €655.22

-€171.11

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — 1-1/4" clamp, 36" width

Low, sleek Monkey Bar–style handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84–'17 models with 3-1/2" on-center risers (excludes Springers, FLT/FLHT, XL 883C/1200C).

€484.11 €655.22

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, black

Hand-crafted bagger-style monkey bar, pre-drilled for internal wiring and compatible with Paul Yaffe's Super Clamp.

€435.55 €589.49

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 1" clamp, Chrome

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 1"...

Hand-crafted for touring models; pre-drilled for internal wiring; slotted and smooth sections; compatible with Paul Yaffe's Bagger Nation Super Clamp; sold individually.

€435.55 €589.49

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls