Handlebars & Controls

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 32-1/4" width, chrome

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete Viking handlebar kit with matching braided cables and brake lines. Preloaded E‑Z pull‑thru sleeving for fast wiring. Includes all necessary cables, hardware and extensions. Assembled in the U.S.A.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 12" center width, 1" clamping diameter, Chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter,...

Complete kits with matching braided cables and brake lines; patented internal design for easy wiring; preloaded E‑Z pull-thru sleeving; includes all required hardware. Assembled in the U.S.A.

€553.23 €735.02

1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1" clamp, Chrome

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete installation kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and all necessary hardware for a clean, fast install.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12" (30.5 cm), Chrome

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12"...

Complete Viking handlebar kit with matched braided cables and brake lines, preloaded pull‑thru sleeving, burr‑free internal routing, and all necessary hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4" center, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4"...

Patented internal routing and preloaded E‑Z pull-thru sleeving for fast, clean wiring installs; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€331.15 €419.29

$1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\" clamp, 10\" rise, Chrome$

-€93.30

MAGNUM SHIELDING 1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\"...

Patented Viking internal wiring design for clean installations; preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and high‑luster finish.

€362.88 €456.18

1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp, Black gloss

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp,...

Patented internal routing for easy wiring installs; preloaded E‑Z pull‑thru sleeving; burr‑free internal radius; CNC mandrel bends and machined control mounts; not compatible with stock risers on certain models.

€376.30 €473.06

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 34-1/4" width, Chrome

Quality construction with burr-free wiring slots and CNC-bent tubing for a precise fit and comfortable yet aggressive wrist angles. Some models may require riser changes for proper fitment.

€119.82 €151.71

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width, gloss black

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width, gloss black

CNC-bent ape hanger handlebar with burr-free wiring slots and comfortable wrist angles. Some models may require riser changes for correct fit. Durable steel construction.

€108.86 €137.84

1" Handlebar — 34-5/8" width, 1" clamping diameter, gloss black

-€30.63

MAGNUM SHIELDING 1" Handlebar — 34-5/8" width, 1" clamping diameter, gloss black

Premium handlebar with precise knurling and CNC-bent construction. Installation may require riser change on some models.

€115.08 €145.71

1" Handlebar — 1" clamping, 12" center width, 12" rise, Gloss Black

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 12" center width, 12" rise, Gloss...

CNC-bent 1" handlebar with burr-free wiring slots and 3-1/2" on-center knurling. Models with a center section larger than 1" will require riser change.

€115.08 €145.71

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€33.61

SLYFOX Handlebar — 29-1/2" width, 1" clamp, chrome finish

Aggressive motocross-style handlebar with brushed stainless finish, laser-etched SlyFox logo, slotted for internal wiring, knurled center, fits 1" risers, made in the U.S.A.

€130.72 €164.33

-€33.61

SLYFOX Handlebar — Black, 75 cm (29.5 in), 25.4 mm clamp

Aggressive motocross-style handlebar with knurled center, slotted for internal wiring and laser-etched SlyFox logo. Made in the U.S.A.

€130.72 €164.33

-€33.61

SLYFOX Handlebar — 29-1/2" width, 1" clamp, Chrome

Aggressive motocross-style handlebar with brushed stainless finish, slotted for internal wiring and a knurled center. Made in the U.S.A.

€130.72 €164.33

Handlebar — 29-1/2" width, 1" clamp diameter, 3-1/2" clamp width, Polished silver

-€38.43

SLYFOX Handlebar — 29-1/2" width, 1" clamp diameter, 3-1/2" clamp...

Aggressive motocross-style handlebar with brushed finish and laser-etched SlyFox logo. Slotted for internal wiring, knurled center, universal fit. Manufactured in the United States.

€149.43 €187.86

-€33.50

SLYFOX Handlebar — 29-1/2" width, 1" clamp, 3-1/2" clamp width, Black

Aggressive motocross-style profile, slotted for internal wiring, knurled center for secure grip, made in the U.S.A.

€130.26 €163.76

$Handlebar — 75 cm (29-1/2\"), 25.4 mm clamp, 88.9 mm clamping width, Polished$

-€38.29

SLYFOX Handlebar — 75 cm (29-1/2\"), 25.4 mm clamp, 88.9 mm clamping...

Motocross-style handlebar with brushed stainless finish, slotted routing, knurled center, and U.S.A. manufacturing.

€148.91 €187.20

-€33.50

SLYFOX Handlebar — 29.5 in width, 1 in clamp, 3.5 in clamping, Black

Aggressive motocross-style handlebar with a brushed stainless finish, slotted for internal wiring and 3-1/2” knurling for secure control.

€130.26 €163.76

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 1" clamp, 1-1/4" bar

Bagger-style square top handlebar engineered for riding comfort, with machined control mount, internal wiring routing, and CNC mandrel bends for a precise fit.

€371.32 €466.80

Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp,...

Bagger-style handlebar engineered for comfort with machined control mount, clean internal wiring routing, and CNC mandrel bends. Works with standard controls including hydraulic clutch.

€371.32 €466.80

Crusader Square Top Handlebar — 36 in width, 14 in rise, 1 in clamp, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36 in width, 14 in rise, 1 in...

Bagger-style handlebar engineered for riding comfort. Machined control mount, internal wiring routing, and pre-loaded pull-thru sleeving for easy installation. CNC mandrel bent for accurate fit and Batwing clearance.

€371.32 €466.80

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls