Handlebars & Controls

-€84.08

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width

Seamless DOM mild steel construction
Pre-drilled and notched for throttle-by-wire
Made in the U.S.A.

€326.99 €411.07

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 35-1/2" width, Black

-€86.46

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 35-1/2"...

Seamless construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€336.24 €422.70

-€50.98

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 2-1/2" rise, 30" width, Chrome

Laser-etched Thrashin® logo, drilled and slotted for internal wiring, TBW keyholes, knurled center, made in U.S.A.

€144.26 €195.24

1" Handlebar — 25.4 mm (1"), 30" width, 63.5 mm rise

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1"), 30" width, 63.5 mm rise

Laser-etched Thrashin® handlebar drilled for internal wiring, knurled center for clamp grip, TBW-compatible.

€134.98 €182.74

-€54.13

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 30" width, 4" rise, 25° sweep, Chrome

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes (TBW plug required for cable throttles); knurled center; made in U.S.A.

€152.98 €207.11

1" Handlebar — 30" width, 4" rise, 25° sweep, black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 30" width, 4" rise, 25° sweep, black

Knurled center, pre-drilled for internal wiring, and TBW-compatible keyholes for straightforward installation.

€134.98 €182.74

-€44.28

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 30" width, 5-1/2" rise, Chrome

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes; knurled center; made in U.S.A.

€125.15 €169.43

1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep,...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; TBW keyholes for late-style fitments (TBW plug required for cable throttles); knurled center for maximum clamp grip; made in U.S.A.

€134.98 €182.74

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise,...

Laser-etched Thrashin® handlebar pre-drilled for internal wiring; TBW keyholes for late-style fitments; knurled center; made in the United States.

€134.98 €182.74

-€50.64

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 31-1/2" width, 4" rise

Thrashin® handlebar with laser-etched logo, pre-drilled for internal wiring, TBW keyholes, and knurled center for improved clamp grip. Made in U.S.A.

€143.30 €193.94

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 14 cm rise, 78.5 cm width

High-bend 1" handlebar with laser-etched Thrashin® logo, drilled routing for internal wiring, TBW keyholes and knurled center for superior clamp grip.

€168.45 €228.05

1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter, 77.5 cm (30-1/2") width, 11.5 cm (4-1/2") rise

-€92.58

TRASK 1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter,...

Seamless DOM mild steel construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€360.06 €452.64

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1" clamp, 32-1/4" width, 8-1/2" rise

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for throttle-by-wire.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, 8-1/2" rise

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, 8-1/2"...

Seamless DOM steel construction, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — Chrome, 37-1/2" W, 8-1/2" Rise

-€95.20

TRASK 1-1/4" V-Line Handlebar — Chrome, 37-1/2" W, 8-1/2" Rise

Classic V-Line handlebar, pre-drilled and notched for TBW, built for lasting performance.

€370.25 €465.45

-€12.92
Out of Stock

CULT WERK Drag Bar — 82 cm (32-1/4"), fits Harley 1984+, Black

1" drag-style bar, 820 mm wide; fits Harley models from 1984 onward; no cable or line extensions required.

€74.58 €87.50

-€17.10
Out of Stock

CULT WERK Drag Bar — 82 cm (32-1/4"), Black

Classic 1-inch drag handlebar. Fits Harley models from 1984 onward. Cables and lines do not require extension. Common choice for custom builds.

€98.73 €115.83

1" Handlebar — 25.4 mm clamp, 31 in width, 4 in rise, 25° sweep, Polished

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 31 in width, 4 in rise, 25°...

Thrashin® 1" handlebar with laser-etched logo and drilled routing for internal wiring. TBW keyholes accommodate late-style fitments; knurled center for secure clamp grip.

€168.45 €228.05

1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25° sweep, polished

-€58.15

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25°...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; throttle-by-wire keyholes; knurled center for clamp grip; made in the United States.

€164.34 €222.49

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls