Handlebars & Controls

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width, Chrome

-€35.91

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Classic 1" bagger ape handlebar with internal wiring prep, throttle-by-wire notch, and knurled center for secure control placement.

€139.45 €175.36

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Mandrel-bent 1" seamless tubing; notched for electronic throttle; knurled, dimpled and pre-drilled for internal wiring. Made in the United States; recommended for bagger fitment.

€141.69 €191.77

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise, 89 cm width, Black

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise,...

Mandrel-bent bagger ape handlebar with notches for throttle-by-wire and pre-drilled center for internal wiring.

€141.69 €191.77

-€5.09

PAUL YAFFE BAGGER NATION Handlebar Riser Spacers — 25.4 mm (1") clamp, Chrome

Adapts Paul Yaffe Bagger and Sport Monkey Bars for fitment on newer FLHR models. Made in the USA. Bars with 14"+ end rise may require cable or wiring extensions.

€19.86 €24.95

Patriot Series Pivoting Handlebar Risers — 1" clamp, 2" rise, Black

-€32.03

ROX SPEED FX Patriot Series Pivoting Handlebar Risers — 1" clamp, 2" rise,...

Patented pivoting risers for customizable bar position
Mounts on most V‑Twin machines with an open mounting area
Simple bolt‑on installation; secure top and bottom clamping
Made in the USA; verify cable and brake line length before installation

€90.51 €122.54

Patriot Series Pivoting Handlebar Risers — 1" clamp, 3" rise, Black

-€34.39

ROX SPEED FX Patriot Series Pivoting Handlebar Risers — 1" clamp, 3" rise,...

Patriot Series pivoting risers mount to most V-Twin 1" handlebars and allow forward/back positioning for a customized ride; easy installation.

€97.18 €131.57

Patriot Series Pivoting Handlebar Risers — 1" clamp, 76.2 mm rise, Chrome

-€52.90

ROX SPEED FX Patriot Series Pivoting Handlebar Risers — 1" clamp, 76.2 mm...

Pivoting risers for V‑Twin motorcycles that let you position the bars forward, back, or anywhere between; easy installation and made in the USA.

€149.50 €202.40

1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9" sweep, Black

-€180.81

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9"...

Hand-crafted for touring models; pre-drilled for internal wiring; compatible with Paul Yaffe's Bagger Nation Super Clamp.

€377.48 €558.29

1-1/2” Barback Handlebar Risers — 1-3/8" rise, 3/4" pullback, 7/8" clamp, Black

-€41.22

ROX SPEED FX 1-1/2” Barback Handlebar Risers — 1-3/8" rise, 3/4" pullback,...

Approximately 1-1/2" total movement (≈1-1/4" up, 3/4" back).
Billet aluminum construction.
Works with stock cables; hardware and instructions included.
Subtle engraved Rox logo.
Made in the U.S.A.

€116.50 €157.72

$860 Cruiser Grips — 22 mm (7/8\"), 13 cm (5-1/8\"), Black$

-€6.81

PRO GRIP 860 Cruiser Grips — 22 mm (7/8\"), 13 cm (5-1/8\"), Black

Vibration-absorbing cruiser grips with closed ends and medium texture. Designed for standard cruiser handlebars.

€14.59 €21.40

$862 Cruiser Grips — 22 mm (7/8\") handlebar diameter, 14 cm (5-1/2\") length, Black, Chrome$

-€5.73

PRO GRIP 862 Cruiser Grips — 22 mm (7/8\") handlebar diameter, 14 cm...

High-tech materials absorb handlebar vibrations and provide a large grip surface for improved comfort and control.

€12.27 €18.00

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€553.23 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

Pre-Wired Handlebar — 92.5 cm width, 32 mm clamp, 40.5 cm rise, Chrome

-€123.53

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 92.5 cm width, 32 mm clamp, 40.5 cm...

Pre-wired for easy installation and seamless twist grip sensor retention.

€480.42 €603.95

1" Handlebar — 12" rise, 33-3/4" width, Chrome

-€31.05

MAGNUM SHIELDING 1" Handlebar — 12" rise, 33-3/4" width, Chrome

Burr-free wiring slots and on-center knurling; CNC-bent for fit with comfortable, aggressive wrist angles.

€116.66 €147.71

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, chrome

Steel handlebar with burr-free wiring slots, precise knurling and CNC-bent construction for comfortable, aggressive wrist angles.

€119.82 €151.71

1" Handlebar — 1" clamp diameter, 33" width, black gloss

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp diameter, 33" width, black gloss

High-quality steel handlebar with burr-free wiring slots and CNC-bent construction for a precise fit.

€108.86 €137.84

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

CNC-bent handlebar with burr-free wiring slots, center knurling, and aggressive wrist angles.

€108.86 €137.84

-€29.83

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, black gloss

CNC-bent ape hanger with burr-free wiring slots and 3-1/2” on-center knurling for secure clamping. Comfortable yet aggressive wrist angles.

€112.03 €141.86

1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

Quality-constructed handlebar with burr-free wiring slots, CNC-bent accuracy, and an aggressive wrist-angle profile. Some models may require riser changes.

€115.08 €145.71

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, Gloss Black

Quality CNC-bent handlebar with burr-free wiring slots and knurling for secure control placement.

€115.08 €145.71

Viking Warrior Handlebar — 32 mm clamp, 8" center, 12" rise, 6" pullback

-€97.94

MAGNUM SHIELDING Viking Warrior Handlebar — 32 mm clamp, 8" center, 12" rise,...

Patented internal wiring path, burr‑free peak, preloaded pull‑thru sleeving, machined mounts, OE-fit and adjustable, assembled in USA.

€367.95 €465.89

-€46.57

PAUL YAFFE BAGGER NATION Racing Hand Levers — Brake & Clutch, Chrome

Racing-inspired replacement levers with machined accents for improved control and style.

€131.76 €178.33

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12" rise, 1" clamp, 15" center width, Black

-€150.19

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12"...

Hand-crafted touring fit; pre-drilled for internal wiring; designed for one-piece riser clamp compatibility.

€424.92 €575.11

1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

Low, Monkey Bar–style drag handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84–'17 models with 3-1/2" on-center risers.

€435.55 €589.49

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls