Handlebars & Controls

-€36.61

HYPERPRO Steering Damper Mounting Kits — HYPERPRO, MK-HD17-S002, Black

Precision CNC-machined mounting kit in gold anodized aluminum. Improves steering stability and reduces wobble.

€115.54 €152.15

-€36.61

HYPERPRO Steering Damper Mounting Kits

Steering Damper Mounting Kits for enhanced performance and durability.

€142.39 €179.00

-€36.61

HYPERPRO Steering Damper Mounting Kits — Black

Precision CNC-machined aluminum brackets with gold anodized finish for lightweight strength and reliable steering damper attachment.

€115.54 €152.15

-€34.57

HYPERPRO Steering Damper Mounting Kits — Black, Pair

CNC machined aluminum construction with a gold anodized finish. Improves steering stability and provides a durable mounting solution. Easy to install with professional fitment recommended.

€134.43 €169.00

-€40.70

HYPERPRO Steering Damper Mounting Kits — MK-HD12-S004-B, Black, Pair

Precision CNC machined steering damper mounting kit. Lightweight aluminum construction with gold anodized finish. Improves steering stability and feedback.

€128.45 €169.15

Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–, Softail 2018–, black

-€12.18

CULT WERK Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–,...

Precision CNC-milled master cylinder cover for Harley‑Davidson Breakout (2013–) and Softail (2018–). Direct replacement with interior machined to match original seal guides.

€70.32 €82.50

Brake and Clutch Cylinder Cover — Harley-Davidson Touring 2016–2020, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover — Harley-Davidson Touring...

Precision machined replacement covers for Harley-Davidson Touring models 2016–2020. Easy two-screw installation; interior geometry matches the original for seal compatibility.

€152.70 €179.17

Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night Rod, Night Rod Special 2007–2017, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night...

Precision-milled replacement covers for the clutch and brake cylinders on Harley-Davidson V-Rod, Night Rod and Night Rod Special (2007–2017). Easy to install; original seal retained. Approximately 25mm higher than stock.

€152.70 €179.17

Hand Grips — 25.4 mm (1") handlebar, Black

-€14.65

CULT WERK Hand Grips — 25.4 mm (1") handlebar, Black

Precision-milled handlebar grips for Harley-Davidson ® motorcycles with electronic throttle. Durable protective finish and precise fit for confident control.

€84.52 €99.17

Hand Grips — 25.4 mm (1") fit, black powder-coated

-€14.65

CULT WERK Hand Grips — 25.4 mm (1") fit, black powder-coated

Precision-machined handlebar grips for many Harley-Davidson models with electronic throttle. Comfortable, durable, and easy to install.

€84.52 €99.17

-€24.00

CULT WERK Hand Grips — 25.4 mm (1") , Black

Precision CNC-machined grips for Harley-Davidson motorcycles with a durable, stylish dark finish.

€138.50 €162.50

Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

-€24.00

CULT WERK Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

Precision-machined hand grips for Harley-Davidson motorcycles; durable protective finish and ergonomic design for improved control.

€138.50 €162.50

860 Cruiser Grips — 7/8" bars, 13 cm (5-1/8")

-€6.81

PRO GRIP 860 Cruiser Grips — 7/8" bars, 13 cm (5-1/8")

High-tech vibration-absorbing cruiser grips for improved comfort and control. Easy to install.

€14.59 €21.40

$862 Cruiser Grips — 22 mm (7/8\") handlebar diameter, 14 cm (5-1/2\") length, Black, Chrome$

-€5.73

PRO GRIP 862 Cruiser Grips — 22 mm (7/8\") handlebar diameter, 14 cm...

High-tech materials absorb handlebar vibrations and provide a large grip surface for improved comfort and control.

€12.27 €18.00

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

-€181.79

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€553.23 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1" clamp, 3-1/2" knurl

-€93.30

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1"...

Patented internal design for easy wiring installations, preloaded E-Z sleeving, CNC mandrel bends, machined mounts, and high-luster finish.

€362.88 €456.18

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 3-1/2" clamp width, gloss black

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal wiring channel for clean installations, preloaded E‑Z sleeving, CNC mandrel bends and machined control mounts. Not compatible with stock risers on 883C and 1200C.

€329.50 €417.21

1" Handlebar — 12" rise, 33-3/4" width, Chrome

-€31.05

MAGNUM SHIELDING 1" Handlebar — 12" rise, 33-3/4" width, Chrome

Burr-free wiring slots and on-center knurling; CNC-bent for fit with comfortable, aggressive wrist angles.

€116.66 €147.71

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, chrome

Steel handlebar with burr-free wiring slots, precise knurling and CNC-bent construction for comfortable, aggressive wrist angles.

€119.82 €151.71

-€32.70

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 12" rise, 10-3/8" pullback

Quality construction with burr-free wiring slots and center knurling. CNC-bent for precise fit and comfortable, aggressive wrist angles. Some models may require riser changes for installation.

€122.85 €155.55

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

CNC-bent handlebar with burr-free wiring slots, center knurling, and aggressive wrist angles.

€108.86 €137.84

-€29.83

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, black gloss

CNC-bent ape hanger with burr-free wiring slots and 3-1/2” on-center knurling for secure clamping. Comfortable yet aggressive wrist angles.

€112.03 €141.86

1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

Quality-constructed handlebar with burr-free wiring slots, CNC-bent accuracy, and an aggressive wrist-angle profile. Some models may require riser changes.

€115.08 €145.71

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, Gloss Black

Quality CNC-bent handlebar with burr-free wiring slots and knurling for secure control placement.

€115.08 €145.71

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls