Handlebars & Controls

Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–, Softail 2018–, black

-€12.18

CULT WERK Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–,...

Precision CNC-milled master cylinder cover for Harley‑Davidson Breakout (2013–) and Softail (2018–). Direct replacement with interior machined to match original seal guides.

€70.32 €82.50

Brake and Clutch Cylinder Cover — Harley-Davidson Touring 2016–2020, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover — Harley-Davidson Touring...

Precision machined replacement covers for Harley-Davidson Touring models 2016–2020. Easy two-screw installation; interior geometry matches the original for seal compatibility.

€152.70 €179.17

Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night Rod, Night Rod Special 2007–2017, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night...

Precision-milled replacement covers for the clutch and brake cylinders on Harley-Davidson V-Rod, Night Rod and Night Rod Special (2007–2017). Easy to install; original seal retained. Approximately 25mm higher than stock.

€152.70 €179.17

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

-€12.92

CULT WERK Drag Bar — 82 cm (32-1/4"), fits Harley 1984+, Black

1" drag-style bar, 820 mm wide; fits Harley models from 1984 onward; no cable or line extensions required.

€74.58 €87.50

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€12.03
Out of Stock

EASTERN MOTORCYCLE PARTS Rocker Box Stud Kit — 8 Pack

Includes eight long studs, two short studs and one top motor mount stud. One kit required per head.

€34.00 €46.03

-€5.21

EASTERN MOTORCYCLE PARTS Top Motor Mount Studs — 4 pack

Durable mounting hardware delivers secure clamping, corrosion resistance, and precise fit. Made in the U.S.A.

€14.74 €19.95

-€4.14

EASTERN MOTORCYCLE PARTS Brake Pad Dowel Pins — Front/Rear, 10-pack

Precision dowel pins for accurate brake pad alignment. Durable construction and straightforward installation for reliable brake performance.

€11.67 €15.81

-€17.10
Out of Stock

CULT WERK Drag Bar — 82 cm (32-1/4"), Black

Classic 1-inch drag handlebar. Fits Harley models from 1984 onward. Cables and lines do not require extension. Common choice for custom builds.

€98.73 €115.83

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls