Handlebars & Controls

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

-€76.26
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€296.60 €372.86

-€89.07
Out of Stock

TODD'S CYCLE [object Object]

Neutral, low-profile 1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility, and Made in the U.S.A.

€346.41 €435.48

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger Handlebar compatible with batwing fairing; notched for throttle-by-wire, with large burr-free wiring slots. Supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger handlebar compatible with batwing fairing, notched for throttle-by-wire, with laser-cut wiring slots; supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility and heated-grip support. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots for internal/external routing, compatible with hydraulic clutch and heated grips. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — Black

Upgrade your ride with the 1-1/4" Strip Handlebar, designed for functionality and style.

€338.66 €425.74

-€89.25
Out of Stock

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2" rise, Chrome

-€92.58
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2"...

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€360.06 €452.64

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 32-1/4" width, Black powder-coated

Seamless DOM mild steel construction with black powder coat or chrome finish. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, powder-coated black

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width,...

Seamless DOM mild steel handlebar with black powder coat or chrome finish. Pre-drilled and notched for internal wiring and throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 35.5 cm (14") rise, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch and heated grips; clean line of sight to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm) diameter, 34" width, 12" rise, Chrome

-€162.72
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm)...

Complete handlebar kit with matching cables and brake lines
1-1/4" Caliber handlebars machined for internal wiring and electric throttle control
Preloaded E‑Z pull‑thru sleeving for easy wiring
Kits include all necessary hardware and fittings; dual-disc kits include all-brazed manifold
Assembled in the USA

€611.27 €773.99

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm) diameter, 1" clamp (25.4 mm), Chrome

-€162.93
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm)...

Complete installation kit with matching braided cables, brake lines, hardware, and wiring extensions. Preloaded sleeving and machined control mounts make installation straightforward.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1" center, Chrome

-€163.18
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete Magnum Caliber handlebar kit with braided cables and brake lines; preloaded sleeving and OE-quality components.

€613.03 €776.21

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 19.5 cm (7-3/4") center width, Chrome

-€162.93
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete installation kit with Magnum 1-1/4" Caliber handlebars, braided cables, brake lines, hardware, and any required switch or turn signal wiring. Pre-drilled and machined for internal wiring and throttle-by-wire. Assembled in the USA.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 7-3/4" center, gloss black

-€164.12
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum 1-1/4" Caliber handlebar kit with braided cables, brake lines, hardware and E‑Z sleeving for easy installation.

€616.53 €780.65

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls