Handlebars & Controls

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat finish

-€1.20
Out of Stock

EMGO Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat...

Classic old-school look with ribs along the length for improved grip and control.

€3.40 €4.60

-€76.26
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€296.60 €372.86

-€89.07
Out of Stock

TODD'S CYCLE [object Object]

Neutral, low-profile 1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility, and Made in the U.S.A.

€346.41 €435.48

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger Handlebar compatible with batwing fairing; notched for throttle-by-wire, with large burr-free wiring slots. Supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger handlebar compatible with batwing fairing, notched for throttle-by-wire, with laser-cut wiring slots; supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility and heated-grip support. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots for internal/external routing, compatible with hydraulic clutch and heated grips. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — Black

Upgrade your ride with the 1-1/4" Strip Handlebar, designed for functionality and style.

€338.66 €425.74

-€89.25
Out of Stock

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2" rise, Chrome

-€92.58
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width, 4-1/2"...

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€360.06 €452.64

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 32-1/4" width, Black powder-coated

Seamless DOM mild steel construction with black powder coat or chrome finish. Pre-drilled for internal wiring and notched for throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4" width

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 32-1/4"...

Seamless DOM steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90 cm width, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 25.4 mm clamp, 90...

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for TBW. Made in the USA.

€370.25 €465.45

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width, powder-coated black

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 37-1/2" width,...

Seamless DOM mild steel handlebar with black powder coat or chrome finish. Pre-drilled and notched for internal wiring and throttle-by-wire. Made in the U.S.A.

€370.25 €465.45

1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

-€95.20
Out of Stock

TRASK 1-1/4" V-Line Handlebar — 37-1/2" width, 8-1/2" rise, Chrome

Seamless DOM mild steel V-Line handlebar, pre-drilled for internal wiring and notched for throttle-by-wire; made in the U.S.A.

€370.25 €465.45

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

1" Handlebar — 25.4 mm diameter, 81.5 cm (32") width, 30.5 cm (12") rise, chrome

-€14.17
Out of Stock

EMGO 1" Handlebar — 25.4 mm diameter, 81.5 cm (32") width, 30.5 cm...

Popular bends in high-strength carbon steel. Verify handlebar dimensions before ordering.

€40.05 €54.22

1" Handlebar — 25.4 mm diameter, 32" width, 14" rise, 7-1/2" pullback

-€15.07
Out of Stock

EMGO 1" Handlebar — 25.4 mm diameter, 32" width, 14" rise, 7-1/2"...

Ape hanger-style handlebar with popular bends and a smooth, unknurled grip. Verify dimensions before ordering.

€42.59 €57.66

1" Handlebar — 25.4 mm (1"), 81.5 cm (32"), 40.5 cm (16") rise, 19 cm (7-1/2") pullback, Chrome

-€16.27
Out of Stock

EMGO 1" Handlebar — 25.4 mm (1"), 81.5 cm (32"), 40.5 cm (16")...

Popular bends built from high-strength carbon steel. Verify handlebar dimensions before ordering.

€45.98 €62.25

1" Handlebar — 1" diameter, 31" width, 5" rise, 7" pullback, Chrome

-€11.31
Out of Stock

EMGO 1" Handlebar — 1" diameter, 31" width, 5" rise, 7" pullback,...

Popular bends with a classic profile.

Smooth, unknurled ends for a clean look.

Verify handlebar dimensions before ordering.

€31.95 €43.26

-€8.30
Out of Stock

EMGO 1" Handlebar — 73.5 cm (29"), Chrome

Popular bends with dependable construction. Verify handlebar dimensions before ordering.

€23.45 €31.75

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls