Handlebars & Controls

Kickback Handlebar Risers — 4" rise, 1-1/2" pullback, 1" clamping diameter, Chrome

-€38.21
Out of Stock

BARON Kickback Handlebar Risers — 4" rise, 1-1/2" pullback, 1"...

Comfort-focused pullback risers that reduce reach and relieve shoulder, neck and back pain. Each riser features its own cap for mounting accessories and includes mounting hardware and instructions. Easy to install and compatible with most stock lines and cables.

€148.58 €186.79

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€4.29
Out of Stock

SW-MOTECH Ram Extension — Ram arm, black

Extends Ram 1 inch ball systems with a second arm for improved positioning.

€16.72 €21.01

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

$Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\") clamping diameter, 25.4 mm (1\") rise, 1/2-13 thread size, Black gloss$

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\")...

High-quality clamp and riser kit for secure handlebar mounting. Includes one-piece riser clamp. Made in the USA.

€197.38 €248.12

-€76.26
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€296.60 €372.86

-€89.07
Out of Stock

TODD'S CYCLE [object Object]

Neutral, low-profile 1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility, and Made in the U.S.A.

€346.41 €435.48

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger Handlebar compatible with batwing fairing; notched for throttle-by-wire, with large burr-free wiring slots. Supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger handlebar compatible with batwing fairing, notched for throttle-by-wire, with laser-cut wiring slots; supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility and heated-grip support. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots for internal/external routing, compatible with hydraulic clutch and heated grips. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — Black

Upgrade your ride with the 1-1/4" Strip Handlebar, designed for functionality and style.

€338.66 €425.74

-€89.25
Out of Stock

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

Risers — 25.4 mm (1"), 50.8 mm (2" pullback), 15 cm (6" rise), Chrome

-€125.98
Out of Stock

TODD'S CYCLE Risers — 25.4 mm (1"), 50.8 mm (2" pullback), 15 cm (6" rise),...

Billet aluminum risers made in the USA that improve riding position; engraved Todd’s Cycle logo; extremely strong with no rider-perceptible flex.

€489.95 €615.93

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 35.5 cm (14") rise, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch and heated grips; clean line of sight to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm) diameter, 34" width, 12" rise, Chrome

-€162.72
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm)...

Complete handlebar kit with matching cables and brake lines
1-1/4" Caliber handlebars machined for internal wiring and electric throttle control
Preloaded E‑Z pull‑thru sleeving for easy wiring
Kits include all necessary hardware and fittings; dual-disc kits include all-brazed manifold
Assembled in the USA

€611.27 €773.99

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm) diameter, 1" clamp (25.4 mm), Chrome

-€162.93
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" (32 mm)...

Complete installation kit with matching braided cables, brake lines, hardware, and wiring extensions. Preloaded sleeving and machined control mounts make installation straightforward.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1" center, Chrome

-€163.18
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete Magnum Caliber handlebar kit with braided cables and brake lines; preloaded sleeving and OE-quality components.

€613.03 €776.21

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 19.5 cm (7-3/4") center width, Chrome

-€162.93
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete installation kit with Magnum 1-1/4" Caliber handlebars, braided cables, brake lines, hardware, and any required switch or turn signal wiring. Pre-drilled and machined for internal wiring and throttle-by-wire. Assembled in the USA.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 7-3/4" center, gloss black

-€164.12
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum 1-1/4" Caliber handlebar kit with braided cables, brake lines, hardware and E‑Z sleeving for easy installation.

€616.53 €780.65

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls