English
Español
- -€3.43
- Out of Stock
€13.38
Regular price
€16.81
+34 636 847 491 (10:00 - 13:30)
Free EU shipping for orders over 150€
Handlebars & Controls
Subcategories
Active filters
- -€4.29
- Out of Stock
SW-MOTECH
1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10
1" ball adapter for mirror threads (M8/M10). Mounts between mirror and bar mount. Includes adapter, mounting plate, instructions and mounting hardware.
€16.72
Regular price
€21.01
- -€51.36
SLYFOX
T-Bar Adapter — for Batwing fairings, black gloss
Bolts to the triple tree to move the handlebar 2-1/2" closer and raise it 1"; allows taller risers and T-bars; no screen modification required.
€199.70
Regular price
€251.06
- -€4.29
- Out of Stock
SW-MOTECH
Ram Extension — Ram arm, black
Extends Ram 1 inch ball systems with a second arm for improved positioning.
€16.72
Regular price
€21.01
- -€20.38
MEMPHIS SHADES HD
Handguards — 25.4 mm (1"), White gloss
Stylish wind protection in aircraft-grade Lucite with e‑coated aluminum mounts and included hardware for easy installation.
€79.25
Regular price
€99.63
- -€20.38
MEMPHIS SHADES HD
Handguards — 25.4 mm (1") handlebar, White gloss
Stylish wind protection for your hands; E-coated aluminum mounts; rubber-isolated guards; includes matching hardware; made in the USA.
€79.25
Regular price
€99.63
- -€18.12
MEMPHIS SHADES HD
Handguards — 25.4 mm (1") handlebar, White
Stylish wind protection for your hands. Made of aircraft-grade Lucite. Rubber-isolated guards with E-coated aluminum mounts. Includes matching hardware. Made in the USA.
€70.43
Regular price
€88.55
- -€20.56
MEMPHIS SHADES METRIC
Handguards — Black, aluminum mounts
Stylish wind protection with e-coated aluminum mounts and rubber-isolated guards. Includes bolts, nuts and washers. Made of aircraft-grade Lucite. Made in the U.S.A.
€79.94
Regular price
€100.50
- -€88.71
- Out of Stock
SLYFOX
Handlebar Riser Kit — 25.4 mm (1") clamp, 38.1 mm (1-1/2")...
Includes top clamp and mounting hardware. Made in the USA. Easy to install; improves rider ergonomics and control.
€344.95
Regular price
€433.66
- -€93.37
- Out of Stock
SLYFOX
Handlebar Riser Kit — 25.4 mm (1") clamp, 3.5" spacing, 38.1...
Bolt-on riser kit with top clamp and hardware included. Made in the USA. Precision machined for a secure fit.
€363.10
Regular price
€456.47
- -€4.70
ODI
Vans Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length, Red
Classic Vans waffle sole pattern with a domed center for improved ergonomics and vibration dampening. Throttle sleeve not included.
€13.27
Regular price
€17.97
- -€18.83
ODI
Hart-Luck Signature V-Twin Lock-On™ Grips — 25.4 mm (1")...
Locking clutch-side clamp enables quick installation and removal.
Full-waffle pattern and T15 Torx bolts provide secure, slip-free control.
€53.23
Regular price
€72.06
- -€14.41
€56.05
Regular price
€70.46
- -€14.41
SLYFOX
Grips — 25.4 mm (1"), Black, Gloss
Sold as pair. Textured grips that improve comfort and control for everyday riding.
€56.05
Regular price
€70.46
- -€2.58
- Out of Stock
SW-MOTECH
T-Lock Holder for Smartphone Big — Black
Quick, secure T-Lock holder for large smartphones. Fits up to 165 x 80 x 12 mm; minimum 144 x 71 x 7 mm (two of three dimensions required). Includes mounting material and instructions.
€10.03
Regular price
€12.61
- -€162.72
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1" clamp, Chrome
Complete Magnum Caliber handlebar kit with braided cables, brake lines, and hardware for straightforward installation.
€611.27
Regular price
€773.99
- -€162.93
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...
Complete Magnum Caliber handlebar kit with matching braided cables, preloaded E-Z sleeving, and all necessary hardware. Assembled in the USA.
€612.14
Regular price
€775.07
- -€163.18
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1"...
Complete Magnum Caliber handlebar kit with braided cables and brake lines; preloaded sleeving and OE-quality components.
€613.03
Regular price
€776.21
- -€162.93
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...
Complete installation kit with Magnum 1-1/4" Caliber handlebars, braided cables, brake lines, hardware, and any required switch or turn signal wiring. Pre-drilled and machined for internal wiring and throttle-by-wire. Assembled in the USA.
€612.14
Regular price
€775.07
- -€164.12
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...
Complete Magnum 1-1/4" Caliber handlebar kit with braided cables, brake lines, hardware and E‑Z sleeving for easy installation.
€616.53
Regular price
€780.65
- -€218.07
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...
- Complete installation kit with braided cables, brake lines, hardware, and wiring extensions.
- Machined control mounts and preloaded pull‑through sleeving for easier wiring.
- All-brazed manifold on dual-disc kits to prevent leaks and alignment issues.
- Designed to meet or exceed OE fitment and endurance standards.
€819.20
Regular price
€1,037.27
- -€71.50
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-1/2"...
Precision-machined caliber handlebar with burr-free wiring provisions and E-Z pull-thru sleeving. Assembled in the USA. Not compatible with stock risers on 883C/1200C models.
€268.64
Regular price
€340.14
- -€71.50
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, Chrome
Machined control mounts, CNC mandrel bent, pre-loaded E-Z pull-thru sleeving. Assembled in U.S.A. Not for use with stock risers on 883C/1200C.
€268.64
Regular price
€340.14
- -€71.50
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-3/4"...
Precision-machined 1-1/4" diameter handlebar with 1" clamp area, pre-loaded E-Z sleeving for easy wiring, CNC mandrel bent. Not compatible with stock risers on 883C/1200C models.
€268.64
Regular price
€340.14
- -€71.50
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...
Precision CNC mandrel-bent 1-1/4" handlebar with machined control mounts, E-Z pull-thru sleeving, and comfortable wrist angles.
€268.64
Regular price
€340.14
- -€71.50
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...
Machined mounts and laser-cut holes for clean wiring.
Pre-loaded with E-Z sleeving; accepts heated grips; compatible with hydraulic clutch and throttle-by-wire.
Assembled in the USA.
€268.64
Regular price
€340.14
- -€71.56
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 12" rise, 34"...
Precision-crafted handlebar with machined control mounts, laser-cut wiring holes, E-Z pull-thru sleeving, and ergonomic wrist angles. Assembled in the U.S.A.
€268.84
Regular price
€340.40
- -€71.56
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp)
Precision-built Caliber handlebar with machined control mounts, E‑Z pull-thru sleeving, and CNC mandrel bend; assembled in the USA.
€268.84
Regular price
€340.40
- -€71.56
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — Ape Hanger, 32 mm (1-1/4"), 40.5 cm...
Precision-machined 1-1/4" handlebar with machined control mounts, E-Z pull-thru sleeving, CNC mandrel bends, assembled in the U.S.A.
€268.84
Regular price
€340.40
- -€71.56
- Out of Stock
MAGNUM SHIELDING
1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 34-3/4"...
High-quality Caliber handlebar with machined control mounts, laser-cut wiring openings, CNC mandrel bends, E-Z pull-thru sleeving, and U.S. assembly. Not compatible with stock risers on 883C/1200C models.
€268.84
Regular price
€340.40