Handlebars & Controls

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

-€23.58
Out of Stock

KHROME WERKS [object Object]

Durable 1" handlebar made from 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat finish

-€1.20
Out of Stock

EMGO Jack Hammer Grips — 1" handlebar, 5-1/4" length, black flat...

Classic old-school look with ribs along the length for improved grip and control.

€3.40 €4.60

-€3.54
Out of Stock

EMGO 1" Throttle Assembly — 1" handlebar, Chrome

Complete throttle assembly with throttle tube; optional tension adjuster for cold starts.

€10.00 €13.54

$Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\") clamping diameter, 25.4 mm (1\") rise, 1/2-13 thread size, Black gloss$

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\")...

High-quality clamp and riser kit for secure handlebar mounting. Includes one-piece riser clamp. Made in the USA.

€197.38 €248.12

-€76.26
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€296.60 €372.86

-€89.07
Out of Stock

TODD'S CYCLE [object Object]

Neutral, low-profile 1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility, and Made in the U.S.A.

€346.41 €435.48

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger Handlebar compatible with batwing fairing; notched for throttle-by-wire, with large burr-free wiring slots. Supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger handlebar compatible with batwing fairing, notched for throttle-by-wire, with laser-cut wiring slots; supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€87.08
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility and heated-grip support. Made in the U.S.A.

€338.66 €425.74

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — Black

Upgrade your ride with the 1-1/4" Strip Handlebar, designed for functionality and style.

€338.66 €425.74

-€89.25
Out of Stock

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1" Handlebar — 25.4 mm clamp, 82.5 cm (32-1/2") width, 25.5 cm (10") rise, gloss black

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 25.4 mm clamp, 82.5 cm (32-1/2") width, 25.5 cm...

Sturdy 14-gauge steel construction, made in the U.S.A.; classic styling for custom builds.

€131.95 €165.89

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 1" clamp, 85 cm width, 34.5 cm rise, Chrome

14-gauge steel tubing. Made in the U.S.A. Classic bobber styling for custom builds.

€131.95 €165.89

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 1" clamp, 33-1/2" width, 12" rise, Black gloss

14-gauge steel tubing for reliable strength. Designed for custom bobber and ape-hanger builds. Made in the U.S.A.

€131.95 €165.89

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 1" clamp, 34" width, 14" rise, Chrome

14-gauge steel handlebar, made in the U.S.A.; classic styling for custom motorcycles.

€131.95 €165.89

1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 10" rise, 12" center width, Chrome

-€75.14
Out of Stock

KHROME WERKS 1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 10"...

Bobber ape hanger handlebar with a forward-and-up grip angle, diamond knurled center and pre-drilled holes for late-model controls. Made in the U.S.A.

€292.23 €367.37

-€26.00
Out of Stock

KHROME WERKS Tracer Grips — 25.4 mm (1"), Black

Seamless rubber grip technology, billet aluminum end caps and collars, matches Khrome Werks Tracer muffler end caps, made in the U.S.A.

€101.14 €127.14

Tracer Grips — 25.4 mm (1") handlebar, Black

-€26.00
Out of Stock

KHROME WERKS Tracer Grips — 25.4 mm (1") handlebar, Black

Seamless rubber grip technology with billet aluminum end caps; matches Khrome Werks Tracer muffler end caps. Made in the U.S.A.

€101.14 €127.14

-€26.00
Out of Stock

KHROME WERKS Turbine Grips — 25.4 mm (1"), Black

Seamless rubber grip technology with billet aluminum end caps; matches Khrome Werks Turbine muffler end caps; made in the U.S.A.

€101.14 €127.14

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls