Handlebars & Controls

Handlebar Clamp — 1" clamping diameter, polished finish, fits '74–'24 Harley-Davidson (3-1/2" on-center risers)

-€21.02
Out of Stock

THRASHIN SUPPLY CO. Handlebar Clamp — 1" clamping diameter, polished finish, fits...

Fits most '74-'24 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes. Made in the USA and precision machined for secure clamping.

€59.43 €80.45

-€17.98

THRASHIN SUPPLY CO. Handlebar Clamp — 25.4 mm (1") clamp, Black anodized

6061 aircraft-grade billet aluminum clamp compatible with most '74-'24 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes. Made in the USA.

€50.90 €68.88

-€34.89

THRASHIN SUPPLY CO. OG Riser Top Clamp — 1" clamping diameter, Black flat

Replacement top clamp for OG handlebar risers. Updated underside with 1/4-20 drilled and tapped holes. Hardware not included. Made in USA.

€98.63 €133.52

-€35.77
Out of Stock

THRASHIN SUPPLY CO. OG Riser Top Clamp — 1" (25.4 mm), Chrome

Updated top clamp for customers with existing OG handlebar risers; 1/4-20 holes on underside. Hardware not included. Made in USA.

€101.09 €136.86

-€1.03
Out of Stock

EASTERN MOTORCYCLE PARTS Throttle Screw Retaining Rings — 10 Pack, Raw, Steel

High-quality OEM replacement retaining rings for throttle screws.

€2.87 €3.90

Handlebar Risers — 6" rise, 1" clamp, 3-1/2" center-to-center, chrome

-€138.78

THRASHIN SUPPLY CO. Handlebar Risers — 6" rise, 1" clamp, 3-1/2" center-to-center,...

Billet 6061 aluminum risers; straight or pullback options; fits 3-1/2" center-to-center; includes top clamp and hardware. Mounting bolts not included.

€392.20 €530.98

-€167.63

THRASHIN SUPPLY CO. Handlebar Risers — Rise 6.5", 1" clamp, Chrome

6061 aluminum risers with 35° top clamp angle. Fits 3-1/2" center-to-center riser spacing. Works with standard 1" handlebars. Sold as a kit with top clamp and hardware. Made in USA.

€473.75 €641.38

Handlebar Risers — 9-1/2 in rise, 1 in clamp, 3-1/2 in center-to-center, Chrome

-€212.12

THRASHIN SUPPLY CO. Handlebar Risers — 9-1/2 in rise, 1 in clamp, 3-1/2 in...

Billet 6061 aluminum risers; pullback and straight options; sold with top clamp and hardware.

€599.45 €811.57

Hole Shot Risers — 10" rise, 1" clamp, 3-1/2" center spacing, black

-€115.04

THRASHIN SUPPLY CO. Hole Shot Risers — 10" rise, 1" clamp, 3-1/2" center spacing,...

Billet 6061 aluminum risers drilled for internal wiring; fits standard 1" handlebars and 3-1/2" center spacing. Sold in pairs with clamp and hardware. Made in USA.

€325.48 €440.52

Hole Shot Risers — 8" rise, 1" clamp, 3-1/2" center spacing, chrome

-€112.21

THRASHIN SUPPLY CO. Hole Shot Risers — 8" rise, 1" clamp, 3-1/2" center spacing,...

Billet 6061 aluminum risers drilled for internal wiring; sold in pairs with top clamp and hardware. Fits 3-1/2" center-on-center riser spacing, including many OE Harley-Davidson models.

€317.11 €429.32

Street Glide Riser Adapter — Rise 2-3/8" , Pullback 1-5/8" , 1/2-13 thread

-€63.69

THRASHIN SUPPLY CO. Street Glide Riser Adapter — Rise 2-3/8" , Pullback 1-5/8" ,...

Adapter for use with Thrashin® Risers that raises and repositions the riser mounting point; includes necessary hardware and is made in USA.

€179.99 €243.68

-€25.89

THRASHIN SUPPLY CO. Master Cylinder Cover — Black, Silver

Precision-machined master cylinder cover. Hardware included. Reuses factory OEM gasket.

€73.24 €99.13

-€7.95

THRASHIN SUPPLY CO. Bolt Grips — 25.4 mm (1"), Brown

Slim, textured motorcycle grips that reduce vibration and improve control.

€22.47 €30.42

Bolt Grips — 1" (25.4 mm) handlebar, Flat Green

-€8.54

THRASHIN SUPPLY CO. Bolt Grips — 1" (25.4 mm) handlebar, Flat Green

Slim, fully textured grips that reduce vibration and improve control, made from a durable proprietary compound.

€24.14 €32.68

1-1/4" Caliber Handlebar Installation Kit — 1" clamp, Chrome

-€162.72
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1" clamp, Chrome

Complete Magnum Caliber handlebar kit with braided cables, brake lines, and hardware for straightforward installation.

€611.27 €773.99

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 35" width, Chrome

-€162.93

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum Caliber handlebar kit with matching braided cables, preloaded E-Z sleeving, and all necessary hardware. Assembled in the USA.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1" center, Chrome

-€163.18
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" dia, 1"...

Complete Magnum Caliber handlebar kit with braided cables and brake lines; preloaded sleeving and OE-quality components.

€613.03 €776.21

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 19.5 cm (7-3/4") center width, Chrome

-€162.93

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete installation kit with Magnum 1-1/4" Caliber handlebars, braided cables, brake lines, hardware, and any required switch or turn signal wiring. Pre-drilled and machined for internal wiring and throttle-by-wire. Assembled in the USA.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 7-3/4" center, gloss black

-€164.12

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum 1-1/4" Caliber handlebar kit with braided cables, brake lines, hardware and E‑Z sleeving for easy installation.

€616.53 €780.65

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 34-3/4" width, Black gloss

-€218.07
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete installation kit with braided cables, brake lines, hardware, and wiring extensions.
Machined control mounts and preloaded pull‑through sleeving for easier wiring.
All-brazed manifold on dual-disc kits to prevent leaks and alignment issues.
Designed to meet or exceed OE fitment and endurance standards.

€819.20 €1,037.27

1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-1/2" width, Ape Hanger, Chrome

-€71.50
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-1/2"...

Precision-machined caliber handlebar with burr-free wiring provisions and E-Z pull-thru sleeving. Assembled in the USA. Not compatible with stock risers on 883C/1200C models.

€268.64 €340.14

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, Chrome

Machined control mounts, CNC mandrel bent, pre-loaded E-Z pull-thru sleeving. Assembled in U.S.A. Not for use with stock risers on 883C/1200C.

€268.64 €340.14

1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-3/4" width, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-3/4"...

Precision-machined 1-1/4" diameter handlebar with 1" clamp area, pre-loaded E-Z sleeving for easy wiring, CNC mandrel bent. Not compatible with stock risers on 883C/1200C models.

€268.64 €340.14

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width, 14-1/2" rise, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...

Precision CNC mandrel-bent 1-1/4" handlebar with machined control mounts, E-Z pull-thru sleeving, and comfortable wrist angles.

€268.64 €340.14

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...

Machined mounts and laser-cut holes for clean wiring.

Pre-loaded with E-Z sleeving; accepts heated grips; compatible with hydraulic clutch and throttle-by-wire.

Assembled in the USA.

€268.64 €340.14

1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 12" rise, 34" width, Gloss Black

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 12" rise, 34"...

Precision-crafted handlebar with machined control mounts, laser-cut wiring holes, E-Z pull-thru sleeving, and ergonomic wrist angles. Assembled in the U.S.A.

€268.84 €340.40

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp)

Precision-built Caliber handlebar with machined control mounts, E‑Z pull-thru sleeving, and CNC mandrel bend; assembled in the USA.

€268.84 €340.40

1-1/4" Caliber Handlebar — Ape Hanger, 32 mm (1-1/4"), 40.5 cm (16"), Black Gloss

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — Ape Hanger, 32 mm (1-1/4"), 40.5 cm...

Precision-machined 1-1/4" handlebar with machined control mounts, E-Z pull-thru sleeving, CNC mandrel bends, assembled in the U.S.A.

€268.84 €340.40

1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 34-3/4" width, Black gloss

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 34-3/4"...

High-quality Caliber handlebar with machined control mounts, laser-cut wiring openings, CNC mandrel bends, E-Z pull-thru sleeving, and U.S. assembly. Not compatible with stock risers on 883C/1200C models.

€268.84 €340.40

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp), 12" center, Black gloss

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp),...

High-quality machined control mounts and laser-cut, burr-free wiring slots for throttle-by-wire compatibility.

CNC mandrel-bent for accurate fit and comfortable wrist angles, pre-loaded with E-Z pull-thru sleeving.

Assembled in the USA. Not compatible with stock risers on 883C/1200C.

€268.84 €340.40

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls