Handlebars & Controls

$Flamed Grips — 25.4 mm (1\"), Black, Chrome$

-€34.08

DRAG SPECIALTIES Flamed Grips — 25.4 mm (1\"), Black, Chrome

Sculpted flame-accent grips with a comfortable textured surface and sealed ends for a clean custom look.

€96.32 €130.40

-€12.20

DRAG SPECIALTIES Wide Blade Lever Set — Chrome, Brake, Clutch

Late-style wide, flat blade design; responsive feel; compatible with OEM lever perches.

€34.48 €46.68

Buffalo Handlebar Clamp — 1" clamping, 3-1/2" on-center risers, Black gloss

-€26.97

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping, 3-1/2" on-center...

Billet aluminum clamp that covers the entire clamping area of 1-1/4" bars sized down to 1"; fits 3-1/2" on-center risers.

€76.23 €103.20

-€1.34
Out of Stock

DRAG SPECIALTIES Polyurethane Handlebar Riser Bushing — 4 Pack, Black Matte

Restores precise steering by replacing worn bushings.

28% stiffer for better control while retaining vibration damping.

€3.81 €5.15

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers, black flat finish

-€19.69

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet aluminum clamp that covers the full clamping area of 1-1/4" handlebars sized down to 1"; fits 1" handlebars and mounts to 3-1/2" on-center risers.

€55.61 €75.30

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€6.24

DRAG SPECIALTIES Handlebar Clamp — 1", Chrome

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers; fits 1" OD bars. Sold each.

€17.65 €23.89

-€10.31

DRAG SPECIALTIES Skull Lever Set — Brake, Clutch, Chrome

Lightweight levers with skull-end detailing; fits OEM-style controls and serviceable for brake and clutch use.

€29.14 €39.45

Handlebar Control Kit — 25.4 mm clamp, 12.7 mm bore, Chrome

-€64.51
Out of Stock

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm clamp, 12.7 mm bore, Chrome

Complete handlebar control kit; accepts OEM switches or equivalents; replacement parts available separately.

€250.88 €315.39

Replacement Part for Hydraulic Clutch — Chrome master cylinder cover, front mounting

-€5.01

DRAG SPECIALTIES Replacement Part for Hydraulic Clutch — Chrome master cylinder...

Replacement part for hydraulic clutch systems. Fits compatible handlebar control kits. Easy installation.

€14.14 €19.15

-€18.94

DRAG SPECIALTIES Wide Blade Lever Set — Brake and Clutch, Chrome

Late-style wide, flat lever design; lightweight construction; fits OEM lever perches.

€53.51 €72.45

Handlebar Riser & Top Clamp Kit — 1-1/2 in rise, 1 in clamp diameter, 1/2-13 thread, Black gloss

-€39.02
Out of Stock

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1-1/2 in rise, 1 in clamp...

Complete kit with two risers, one-piece top clamp and all necessary hardware. Tapped for standard mounting bolts. Made in the USA.

€117.03 €156.05

-€10.56
Out of Stock

DRAG SPECIALTIES Wide Blade Replacement Clutch Lever — Chrome

Replacement clutch lever compatible with OEM lever perches for easy installation and reliable operation.

€29.84 €40.40

-€10.27

DRAG SPECIALTIES Wide Blade Replacement Brake Lever — Chrome

Precision replacement lever compatible with OEM lever perches; lightweight construction for easy operation.

€29.01 €39.28

$1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome$

-€27.34

DRAG SPECIALTIES 1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome

One-piece billet top clamp with show-chrome finish for Drag Specialties 1-1/2\" Big Buffalo bars. Chrome end caps included; solid clamp sold separately.

€77.26 €104.60

Buffalo Billet Aluminum Handlebar Risers — 1" clamp, 1-1/2" rise, Black gloss

-€21.64

DRAG SPECIALTIES Buffalo Billet Aluminum Handlebar Risers — 1" clamp, 1-1/2"...

Billet aluminum handlebar risers offering a classic look and reliable clamping; accept Buffalo or OEM-style clamps. Made in the USA.

€64.91 €86.55

Buffalo Billet Aluminum Handlebar Risers — 1" clamping, 3" rise, black gloss

-€34.07

DRAG SPECIALTIES Buffalo Billet Aluminum Handlebar Risers — 1" clamping, 3"...

Billet aluminum risers that fit 1" clamping diameter handlebars; 3" rise, accepts Buffalo or OEM-style clamps, gloss black finish.

€96.28 €130.35

-€8.82

DRAG SPECIALTIES Wide Blade Replacement Clutch Lever — matte black, aluminum

Replacement Wide Blade clutch lever compatible with OEM lever perches.

€24.98 €33.80

-€5.30
Out of Stock

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1"), Black Gloss

Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes.

€14.99 €20.29

-€9.97
Out of Stock

DRAG SPECIALTIES Wide Blade Replacement Brake Lever — hydraulic, matte black

Fits OEM lever perches; lightweight design improves control and feel.

€28.19 €38.16

$Replacement OEM-Style Rubber Grips — Black, 25.4 mm (1\")$

-€4.88

DRAG SPECIALTIES Replacement OEM-Style Rubber Grips — Black, 25.4 mm (1\")

Direct-fit OEM-style replacement grips with pre-installed throttle sleeve for dual or single-cable setups.

€13.77 €18.65

Slotted Wide Blade Lever Set — Chrome, Brake & Clutch

-€30.83

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Chrome, Brake & Clutch

Slotted Wide Blade lever set with CNC-machined slots; includes anti-rattle clip and clutch lever pivot bushings.

€87.14 €117.97

Slotted Wide Blade Lever Set — Brake & Clutch, Black matte

-€27.61

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Brake & Clutch, Black matte

Slotted wide blade levers with CNC-machined slots, anti-rattle clip, and clutch lever pivot bushings for smoother operation.

€77.99 €105.60

Forged Aluminum Handlebar Risers — 1" clamping, 8" rise, 1/2-13 thread, Chrome

-€27.35

DRAG SPECIALTIES Forged Aluminum Handlebar Risers — 1" clamping, 8" rise,...

Forged 6061-T6 aluminum risers; drilled and tapped for 1/2"-13 bolts. CNC-machined for a 1" clamping area and designed for 3-1/2" on-center mounts.

€77.30 €104.65

Front Brake Master Cylinder Assembly — 9/16" bore, 1" clamp

-€50.98

DRAG SPECIALTIES Front Brake Master Cylinder Assembly — 9/16" bore, 1" clamp

Includes lever and clamp half
Compatible with DOT 4 and DOT 5 brake fluids
Fits common motorcycle handlebar diameters
Front-mounted for single-disc, non-ABS systems

€144.07 €195.05

Forged Aluminum Handlebar Risers — 1" clamping diameter, 8" rise, Gloss Black

-€27.35

DRAG SPECIALTIES Forged Aluminum Handlebar Risers — 1" clamping diameter, 8"...

Forged 6061-T6 aluminum risers, CNC-machined, drilled for 1/2"-13 bolts, fits 3-1/2" on-center mounts.

€77.30 €104.65

-€18.35
Out of Stock

DRAG SPECIALTIES Forged Aluminum Handlebar Risers — 1" clamp, 3-1/2" rise, chrome

Forged aluminum risers with CNC-machined fitment; drilled and tapped for standard riser bolts and compatible with most OEM top clamps.

€51.85 €70.20

Handlebar Control Kit w/o Switches — 1" clamp, 19.1 mm (3/4") bore, Chrome

-€75.48

DRAG SPECIALTIES Handlebar Control Kit w/o Switches — 1" clamp, 19.1 mm (3/4")...

Complete handlebar control kit designed to accept OEM wires and switches; includes all hardware for easy installation.

€213.34 €288.82

Handlebar Control Kit w/o Switches — 1" clamp, 17.5 mm (11/16") bore, Chrome

-€89.44

DRAG SPECIALTIES Handlebar Control Kit w/o Switches — 1" clamp, 17.5 mm...

Customize the handlebar controls; available as complete kits or individual components. OEM wires and switches mount directly into the housings, and kits include all hardware for easy installation.

€252.74 €342.18

Forged Aluminum Handlebar Risers — 1" clamp, 6-1/2" rise, 1/2-13 thread, 3.5" on-center, Chrome

-€22.88
Out of Stock

DRAG SPECIALTIES Forged Aluminum Handlebar Risers — 1" clamp, 6-1/2" rise,...

Forged 6061-T6 aluminum risers, CNC-machined for precision fit; bolts sold separately.

€64.67 €87.55

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls