Handlebars & Controls

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width, Chrome

-€35.91

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Classic 1" bagger ape handlebar with internal wiring prep, throttle-by-wire notch, and knurled center for secure control placement.

€139.45 €175.36

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Mandrel-bent 1" seamless tubing; notched for electronic throttle; knurled, dimpled and pre-drilled for internal wiring. Made in the United States; recommended for bagger fitment.

€141.69 €191.77

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise, 89 cm width, Black

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise,...

Mandrel-bent bagger ape handlebar with notches for throttle-by-wire and pre-drilled center for internal wiring.

€141.69 €191.77

1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9" sweep, Black

-€180.81

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 9"...

Hand-crafted for touring models; pre-drilled for internal wiring; compatible with Paul Yaffe's Bagger Nation Super Clamp.

€377.48 €558.29

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

Pre-Wired Handlebar — 92.5 cm width, 32 mm clamp, 40.5 cm rise, Chrome

-€123.53

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 92.5 cm width, 32 mm clamp, 40.5 cm...

Pre-wired for easy installation and seamless twist grip sensor retention.

€480.42 €603.95

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€46.57

PAUL YAFFE BAGGER NATION Racing Hand Levers — Brake & Clutch, Chrome

Racing-inspired replacement levers with machined accents for improved control and style.

€131.76 €178.33

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12" rise, 1" clamp, 15" center width, Black

-€150.19

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 12"...

Hand-crafted touring fit; pre-drilled for internal wiring; designed for one-piece riser clamp compatibility.

€424.92 €575.11

1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — Clamp 1", Width 34", Rise 12"

Low, Monkey Bar–style drag handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84–'17 models with 3-1/2" on-center risers.

€435.55 €589.49

-€153.94

PAUL YAFFE BAGGER NATION Monkey Sport Handlebar — 84 cm (33"), 32 mm (1-1/4"), Black

Sport handlebar that improves control and comfort with a natural grip angle and factory slots for internal wiring.

€435.55 €589.49

1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 14" rise, 1" clamp, 11" center width, Chrome

-€171.11

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 14" rise,...

Low-profile Monkey Bar-style handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84-'17 models (excludes Springers, FLT/FLHT, XL 883C/1200C).

€484.11 €655.22

-€171.11

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — 1-1/4" clamp, 36" width

Low, sleek Monkey Bar–style handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84–'17 models with 3-1/2" on-center risers (excludes Springers, FLT/FLHT, XL 883C/1200C).

€484.11 €655.22

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, black

Hand-crafted bagger-style monkey bar, pre-drilled for internal wiring and compatible with Paul Yaffe's Super Clamp.

€435.55 €589.49

1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise, 35-1/2" width

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1" clamp, 8" rise,...

Hand-crafted to fit touring models.

Pre-drilled for internal wiring.

Compatible with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp.

€435.55 €589.49

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 1" clamp, 10" rise

-€150.19

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 1"...

Hand-crafted to fit touring models. Pre-drilled for easy internal wiring. Compatible with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp.

€424.92 €575.11

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" (32 mm), 36" width, 1" clamp, Chrome

-€150.19

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" (32 mm), 36"...

Hand-crafted bagger monkey bar handlebar for touring models. Pre-drilled for internal wiring and compatible with one-piece riser clamps.

€424.92 €575.11

-€153.94

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 12" rise, 36" width, black

Hand-crafted to fit touring models
Pre-drilled for easy internal wiring
Compatible with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp

€435.55 €589.49

1-1/4" Bagger Monkey Bar Handlebar — 32 mm (1-1/4"), 14" rise, 36" width, Chrome

-€171.11

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 32 mm (1-1/4"), 14" rise,...

Hand-crafted fit for touring models; pre-drilled for internal wiring; compatible with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp.

€484.11 €655.22

Pre-Wired Handlebar — Black, 91.5 cm (36") width, 30.5 cm (12") rise, 23 cm (9") pullback

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — Black, 91.5 cm (36") width, 30.5 cm...

Pre-wired Monkey Bars with internal switch wires and connectors installed; includes all materials and online step-by-step instructions. Requires Road Glide master cylinder clamp for '15+ on CVO models.

€580.92 €786.24

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — Black, 1-1/4" clamp, 35" width

Pre-wired handlebar kit with internal wiring and connectors for quick installation.

€580.92 €786.24

1" Classic Bagger Ape Handlebar — 1" clamp, 12" rise, Chrome

-€30.91

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 1" clamp, 12" rise, Chrome

Mandrel-bent seamless steel tubing; Notched for electronic throttle; Knurled, dimpled and pre-drilled for internal wiring; Made in the U.S.A.; '07 and earlier require OEM# 55918-08 clamp.

€120.23 €151.14

$1-1/4\" Bagger Monkey Bar Handlebar — 1-1/4\" diameter, 1\" clamp, 36\" width, Black$

-€153.94
Out of Stock

PAUL YAFFE BAGGER NATION 1-1/4\" Bagger Monkey Bar Handlebar — 1-1/4\" diameter, 1\"...

Hand-crafted for touring models; pre-drilled for internal wiring and compatible with Paul Yaffe's Bagger Nation "Super Clamp".

€435.55 €589.49

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls