Handlebars & Controls (8)

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

Tab-Lock™ Spring Loaded Holder — Large-device compatibility, AMPS hole mount, Black

-€16.29

RAM MOUNTS Tab-Lock™ Spring Loaded Holder — Large-device compatibility,...

Spring-loaded tablet holder with locking mechanism and adjustable support cups for multiple tablet sizes.

€63.34 €79.63

Three-Piece ISO®-Grips — 25.4 mm (1") handlebar, black

-€26.89
Out of Stock

KURYAKYN Three-Piece ISO®-Grips — 25.4 mm (1") handlebar, black

Three-piece ISO® grips with clamshell design for easy installation over factory heated grips; retains factory heating and reduces vibration.

€104.57 €131.46

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

1-1/4" Strip Handlebar — 1-1/4" (32 mm) diameter, 29-1/2" (75 cm) width, 14" (35.5 cm) rise

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" (32 mm) diameter, 29-1/2" (75...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutches, works with heated grips, made in the U.S.A.

€346.41 €435.48

X-Grip® Large Phone Mount with Stubby™ Cup Holder Base — fits 2.57"–3.5" cup holders, Black

-€16.25

RAM MOUNTS X-Grip® Large Phone Mount with Stubby™ Cup Holder Base — fits...

Secure spring-loaded X-Grip® phone holder with Stubby™ cup holder ball base and medium B-length double socket arm for easy, tool-free installation in most cup holders.

€63.22 €79.47

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" width, 10" rise

-€87.41

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" width, 10" rise

Knurled touring handlebar that fits OEM risers and clamps, installs without removing the stock clamp pin, and works with hydraulic clutches.

€339.94 €427.35

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" (76 cm) wide

-€80.67

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 30" (76 cm) wide

Knurled clamping area for secure fit
Made in the U.S.A.
Works with OEM riser and clamps; correct wire exit location
No need to remove stock mount pin; ample adjustability
Compatible with hydraulic clutches and accepts heated grips

€313.72 €394.39

1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width, chrome

-€91.12

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 12" rise, 31" width,...

1-1/4" diameter clamp, knurled center, OEM fitment, >35° adjustment, works with hydraulic clutches.

€354.35 €445.47

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter, 23 cm (9") center width, Chrome

-€95.67
Out of Stock

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter,...

Knurled center, adjustable ape-hanger handlebar compatible with OEM risers and hydraulic clutches; accepts heated grips and features internal wiring and throttle-by-wire notch.

€372.08 €467.75

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 32" width, 14" rise

-€84.77

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 32" width,...

Touring handlebar with knurled clamp area, OEM-friendly fit, and adjustable sweep for comfortable long-distance riding.

€329.61 €414.38

$1-1/4\" Touring Handlebar — 32 mm clamping, 33\" width, 17\" rise, Chrome$

-€91.12

TODD'S CYCLE 1-1/4\" Touring Handlebar — 32 mm clamping, 33\" width, 17\"...

Knurled center, OEM fitment, adjustable with hydraulic clutch compatibility.

€354.35 €445.47

1-1/4" Touring Handlebar — 17" rise, 33" width, Black

-€83.20

TODD'S CYCLE 1-1/4" Touring Handlebar — 17" rise, 33" width, Black

1-1/4" diameter in the clamping area
Knurled clamping area for secure fit
Works with OEM risers and clamps; correct wire exit
Over 35° of adjustment; compatible with hydraulic clutches
Made in the U.S.A.; accepts heated grips

€323.52 €406.72

-€4.76
Out of Stock

KURYAKYN Universal Throttle Boss — Black, XL

Adjustable paddle under the palm holds a steady throttle; installs and removes without tools.

€18.50 €23.26

ISO®-Grips for Harley — 25.4 mm (1 in), Black, Chrome

-€22.27
Out of Stock

KURYAKYN ISO®-Grips for Harley — 25.4 mm (1 in), Black, Chrome

Styled ISO® grips that reduce vibration, allow airflow between ISO®-Pads, and accept the ISO®-Throttle Boss (sold separately).

€86.63 €108.90

Custom Handlebar and Riser Mounting Bolts — 1/2-13 thread, 2-3/4 in length, Chrome

-€2.75

GARDNER-WESTCOTT Custom Handlebar and Riser Mounting Bolts — 1/2-13 thread,...

Made in the USA. Durable mounting bolts for handlebars and risers. Easy installation.

€10.67 €13.42

Custom Handlebar and Riser Mounting Bolts — 1/2-20, 2-1/2 in, Chrome

-€2.58

GARDNER-WESTCOTT Custom Handlebar and Riser Mounting Bolts — 1/2-20, 2-1/2 in,...

Durable mounting hardware for handlebars and risers, sold as a complete set for straightforward installation.

€10.02 €12.60

-€2.27
Out of Stock

KURYAKYN Handlebar Mount Shim Kit — 22 mm (7/8 in), raw finish

Two-piece shim kit lets 1" clamp accessories fit 7/8" handlebars without modification.

€8.84 €11.11

-€11.37
Out of Stock

KURYAKYN Rear Master Cylinder Cover — Chrome

Simple, two-fastener installation. Fits over stock lid and body for a clean finish.

€44.24 €55.61

-€31.52

TODD'S CYCLE Master Cylinder Reservoir — Anodized black

CNC-machined aluminum master cylinder reservoir with rubber diaphragm, universal bracket, and hydraulic line; made in the USA.

€122.53 €154.05

-€29.24

TODD'S CYCLE Master Cylinder Reservoir — Hydraulic, Silver

Precision CNC-machined unit with included elastomer diaphragm, universal bracket, and fluid line. Made in the USA.

€113.69 €142.93

-€20.27
Out of Stock

KURYAKYN Chrome Switch Housing — 25.4 mm (1")

Chrome finish and smooth lines enhance stock controls.

Hidden fasteners for a sleek, finished look.

Accepts stock H-D switches (not included).

€78.83 €99.10

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise

Cafe-style handlebar that creates a more aggressive riding position. Slotted for internal wiring, includes billet end caps, made in the U.S.A.

€192.06 €241.45

-€41.50

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, polished

Motocross-style, low-profile handlebar slotted for internal wiring. Smooth, unknurled surface. Made in the U.S.A.

€161.39 €202.89

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm (3-1/2") rise

-€36.81

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm...

Motocross-style low-profile bar, slotted for internal wiring, no knurling, made in the USA.

€143.14 €179.95

1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Polished

-€41.50

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4")...

Classic, minimalist beater handlebar with internal wiring slots and a narrow, low profile.

€161.39 €202.89

-€36.22

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Black

Classic, simple beater design
Straight, narrow style with measured pullback
Slotted for internal wiring
No knurling for a smooth finish
Made in the USA

€140.84 €177.06

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, Polished

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic, narrow beater-style handlebar with a comfortable wrist angle; slotted for internal wiring; made in the U.S.A.

€275.48 €346.32

1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width, Black

-€64.81

TODD'S CYCLE 1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width,...

Classic narrow beater bar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€252.06 €316.87

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company