Handlebars & Controls (8)

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€24.15

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€217.34 €241.49

1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm (30-1/2") width, Chrome

-€27.94

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 25.4 mm (1") clamp, 77.5 cm...

Comfort-focused 1-1/4" handlebar with TBW-ready slots; made in the U.S.A. Not for use on 883C/1200C stock riser setups.

€251.44 €279.38

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€32.78

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€295.05 €327.83

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€32.79

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€295.13 €327.92

1-1/4" Buffalo T-Bar — 30" width, 10" height

-€30.25

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 30" width, 10" height

Classic 1-1/4" Buffalo T-Bar handlebar. Optional gauge mounts sold separately. Not for use with stock risers on 883C/1200C models.

€272.20 €302.45

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€29.23

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€263.09 €292.32

1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2") clamp, 87.5 cm (34-1/2") width, 11.5 cm (4-1/2") rise

-€27.35

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Beach Bar Handlebar — 38 mm (1-1/2")...

Big, fat Buffalo beach bar with custom bends for comfort; fits ’96 and newer controls; made in the U.S.A.

€246.18 €273.53

1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping, 32-1/2" width, Black

-€16.72

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Drag Bar — 38 mm (1-1/2") clamping,...

Aggressive drag-style handlebar with knurled center and pre-drilled mounting; accepts heated grips and requires special risers.

€150.43 €167.15

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2" width, Black gloss

-€26.23

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 10" rise, 30-1/2"...

Bold T-bar handlebar with custom bends for improved comfort. Pre-drilled; optional gauge mounts available separately. Compatible with most '99+ Harley-Davidson models. Accepts heated grips and hydraulic clutch. Made in the U.S.A.

€236.09 €262.32

1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 35.5 cm (14") rise, Chrome

-€37.27

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Bar — 38 mm (1-1/2"), 35.5 cm (14") rise,...

Handlebars with custom bends for comfort; accepts heated grips and hydraulic clutch. Optional gauge mounts available separately.

€335.48 €372.75

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

-€8.11

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€72.94 €81.05

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

On sale!
-€154.52

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€580.50 €735.02

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished$

-€11.09

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished

Complete, fully assembled rear master cylinder for quick installation.

€99.80 €110.89

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

-€7.79

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€70.12 €77.91

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome polished

-€8.58

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4"), rear, chrome...

Complete rear master cylinder assembly; fully assembled for easy installation.

€77.22 €85.80

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.