Handlebars & Controls (7)

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

-€36.97

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Chrome

High-quality construction
Machined from 6061-T6 billet aluminum
Made in the USA

€143.70 €180.67

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 1" handlebar, Polished brass

Precision knurled grips with a closed-end design for a clean look. Made in the USA. Sold as a pair.

€157.82 €198.40

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 25.4 mm (1"), Polished

High-quality brass series construction for a premium look and lasting durability. Made in the USA. Ideal for riders who want classic style with reliable performance.

€157.82 €198.40

1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1", Polished stainless steel

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1",...

Slimline risers that provide a low-profile rise with solid clamping and straightforward installation.

€112.80 €152.71

-€40.58

ACCUTRONIX Knurled Grooved Custom Grips — 25.4 mm (1"), Brass, Polished

Knurled grooved custom grips that enhance control with durable, high-quality construction. Made in the USA.

€157.82 €198.40

1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm clamp, Black gloss

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm...

Slimline risers with investment-cast stainless steel construction. Fit 1" diameter bars; accept stock 1/2" x 13 mounting hardware. Pair.

€112.80 €152.71

-€40.58

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Brass

High-quality construction; machined from 6061-T6 billet aluminum; made in the USA.

€157.82 €198.40

-€45.80

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome, Pair

Dual cable design. Made in the USA.

€178.10 €223.90

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1") , Chrome

Dual cable design for reliable control. Made in the USA.

€141.94 €178.44

-€36.50

ACCUTRONIX Custom Grips — 25.4 mm (1"), Chrome

Dual cable design for reliable performance.

Made in the USA for consistent quality.

Clean, snag-reducing end design for a classic look.

€141.94 €178.44

1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

Cast aluminum clamshell and throttle tube with chrome-plated ferrules and hardware; fits stock H‑D thread-in and clip-in cables.

€76.55 €103.63

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 25.4 mm (1") handlebar, black

Cast aluminum clamshell throttle assembly with chrome-plated ferrules and plated Allen hardware; accepts rubber grips and fits stock H-D cables.

€76.55 €103.63

-€16.03

BILTWELL Whiskey Throttle Tube — 25.4 mm (1") handlebar diameter, Black

CNC-machined 6061-T6 aluminum throttle tube that lets you fit softer aftermarket grips and routes two cables through a machined channel.

€45.31 €61.34

Murdock Handlebar Risers — 10" rise, 1" clamp, Chrome

-€92.13

BILTWELL Murdock Handlebar Risers — 10" rise, 1" clamp, Chrome

Investment-cast steel one-piece top clamp
TIG welded 4130 chromoly uprights with 1/2"-13 threads
Handlebar clamp bolt patterns fit speedo/tach brackets on many stock model year Harleys
Pair

€260.35 €352.48

Murdock Handlebar Risers — 12" rise, 1" clamp

-€92.40

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp

Investment-cast one-piece top clamp with TIG welded 4130 chromoly uprights; fits many stock Harley speedo/tach brackets.

€261.17 €353.57

Murdock Handlebar Risers — 12" rise, 1" clamp, Black

-€88.80

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Black

Investment-cast top clamp with TIG-welded chromoly uprights; fits many stock Harley speedo/tach brackets.

€259.65 €348.45

$Handguards — 25.4 mm (1\") handlebar fit, White$

-€20.38

MEMPHIS SHADES HD Handguards — 25.4 mm (1\") handlebar fit, White

Stylish wind protection with rubber-isolated guards and matching hardware included.

€79.25 €99.63

-€20.38

MEMPHIS SHADES HD Handguards — 25.4 mm (1") handlebar, White

Stylish wind protection with E-coated aluminum mounts and rubber isolation. Includes matching hardware.

€79.25 €99.63

-€18.12

MEMPHIS SHADES HD Handguards — 25.4 mm (1") handlebar, White

Stylish wind protection for your hands. Made of aircraft-grade Lucite. Rubber-isolated guards with E-coated aluminum mounts. Includes matching hardware. Made in the USA.

€70.43 €88.55

-€3.98
Out of Stock

BILTWELL Torker Grips — 1" handlebar diameter, 5" length, black

Injection-molded Krayton grips with classic surface design to absorb shock and dampen vibration; throttle sleeve not included.

€13.51 €17.49

Elite Custom Billet Aluminum Risers — 1" clamp, 4" rise, fits FXSTS Triple Trees, black anodized

-€56.91

ACCUTRONIX Elite Custom Billet Aluminum Risers — 1" clamp, 4" rise, fits...

Chrome billet aluminum risers with removable cover to hide upper clamp bolts; handlebar clamp bolts included; made in the USA.

€221.31 €278.22

Vans Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length, Red

-€4.70

ODI Vans Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length, Red

Classic Vans waffle sole pattern with a domed center for improved ergonomics and vibration dampening. Throttle sleeve not included.

€13.27 €17.97

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls