Handlebars & Controls (6)

-€132.29

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Black

Complete stud and head bolt kit for V-Twin engines; includes studs, head bolts, assembly lubricant and thread sealant.

€514.45 €646.74

-€33.91

FEULING OIL PUMP CORP. Rocker Arm Shaft Stud & Nut Kit — Black

Stud and nut kit that reinforces rocker arm shaft standoffs to help prevent cylinder head cracking.

€131.90 €165.81

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise

Cafe-style handlebar that creates a more aggressive riding position. Slotted for internal wiring, includes billet end caps, made in the U.S.A.

€192.06 €241.45

-€41.50

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, polished

Motocross-style, low-profile handlebar slotted for internal wiring. Smooth, unknurled surface. Made in the U.S.A.

€161.39 €202.89

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm (3-1/2") rise

-€36.81

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm...

Motocross-style low-profile bar, slotted for internal wiring, no knurling, made in the USA.

€143.14 €179.95

1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Polished

-€41.50

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4")...

Classic, minimalist beater handlebar with internal wiring slots and a narrow, low profile.

€161.39 €202.89

-€36.22

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Black

Classic, simple beater design
Straight, narrow style with measured pullback
Slotted for internal wiring
No knurling for a smooth finish
Made in the USA

€140.84 €177.06

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, Polished

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic, narrow beater-style handlebar with a comfortable wrist angle; slotted for internal wiring; made in the U.S.A.

€275.48 €346.32

1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width, Black

-€64.81

TODD'S CYCLE 1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width,...

Classic narrow beater bar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€252.06 €316.87

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, 12 cm (4-3/4") pullback

-€68.06

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic beater-style handlebar: straight, narrow profile with a comfortable wrist angle and slotted wiring for a clean build.

€264.66 €332.72

-€61.52

TODD'S CYCLE 1-1/4" Beater Bar — 30-1/2" width, 1-1/4" clamp, polished

Classic, simple beater bar with a comfortable wrist angle. Slotted for internal wiring, pre-drilled and knurled at the center. Made in the U.S.A.

€239.20 €300.72

$1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise, Black gloss$

-€68.06

TODD'S CYCLE 1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise,...

Classic 1-1/4" Beater Bar with a straight, narrow profile and comfortable wrist angle. Slotted for internal wiring and pre-drilled for easy installation.

€264.66 €332.72

1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm...

Strip-style handlebar with polished welds, internal wiring slots and throttle notch; requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise, 32" width, Flat Black

-€84.83

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise,...

Strip-style handlebar with concealed wiring, polished welds and throttle notches. Requires special risers and clamps; works with OEM heated grips.

€329.90 €414.73

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm (33-1/4") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm...

Strip handlebar with polished welds, slotted for internal wiring, notched for electronic throttle, pre-drilled and compatible with OEM heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35") width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35")...

Strip-style handlebar with internal wiring routing, throttle notches, polished welds and pre-drilled controls. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

$1-1/2\" Strip Handlebar — 38 mm (1-1/2") diameter, 32 mm (1-1/4") clamp, 32\" width, Chrome$

-€111.28

TODD'S CYCLE 1-1/2\" Strip Handlebar — 38 mm (1-1/2") diameter, 32 mm...

Strip handlebar with slotted routing and throttle-by-wire notch; accepts OEM heated grips. Pre-drilled with polished welds. Requires special risers and clamps.

€432.80 €544.08

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm clamping diameter

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm clamping diameter

Strip handlebar with internal wiring slots and throttle notch. Polished welds and smooth grip area. Works with OEM heated grips and includes pre-drilled ends.

€432.80 €544.08

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp, 32" width

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp,...

Strip handlebar with polished welds, pre-drilled for internal wiring, notched for electronic throttle, and accepts OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp, 85 cm (33-1/2"), Chrome

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp,...

Strip-style 1-1/2" handlebar with polished welds; pre-drilled and slotted for internal wiring. Notched for electronic throttle. Requires special risers and clamps. Made in the U.S.A.; works with OEM heated grips.

€432.80 €544.08

1-1/2" Strip Handlebar — 1-1/2" diameter, 15" rise, 33-1/2" width, Black gloss

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" diameter, 15" rise, 33-1/2"...

Requires special risers and clamps. Slotted for internal wiring; notched for electronic throttle. Works with OEM heated grips. Polished welds. Made in the U.S.A.

€432.80 €544.08

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp, Chrome

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 32 mm (1-1/4") clamp,...

Pre-drilled and slotted for internal wiring. Notched for electronic throttle. Works with OEM heated grips. Requires special risers and clamps. Made in the USA.

€432.80 €544.08

1-1/2" Strip Handlebar — 1-1/2" diameter, 18" rise, 35" width, Black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" diameter, 18" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; works with OEM heated grips; requires special risers and clamps; made in the USA.

€432.80 €544.08

Moto 2.0 Handlebar — 75 cm (29-1/2"), 25.4 mm (1") clamping, 63.5 mm (2-1/2") rise, Chrome

-€36.22

TODD'S CYCLE Moto 2.0 Handlebar — 75 cm (29-1/2"), 25.4 mm (1") clamping,...

Motocross-style handlebar with slotted center and knurled grip. Requires risers for 1" handlebars. Made in the USA.

€140.84 €177.06

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls