Handlebars & Controls (6)

$Narrow-Z Old School Handlebar — 61 cm (24\"), rise 25.5 cm (10\"), 25.4 mm (1\"), Chrome$

-€58.90

LA CHOPPERS Narrow-Z Old School Handlebar — 61 cm (24\"), rise 25.5 cm...

Old-school narrow Z-bar handlebar, drilled for internal wiring and TIG welded for a clean, durable finish.

€229.03 €287.93

Handlebar Riser & Top Clamp Kit — 1" clamping diameter, 1-1/2" rise, 1/2-13 thread

-€50.25

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamping diameter, 1-1/2"...

Complete riser and top clamp kit with all mounting hardware included.

Easy to install and engineered for dependable performance.

€142.00 €192.25

Narrow-Z Old School Handlebar — 61 cm (24"), Rise 25.5 cm (10"), Diameter 25.4 mm (1"), Black gloss

-€47.23

LA CHOPPERS Narrow-Z Old School Handlebar — 61 cm (24"), Rise 25.5 cm...

High-strength steel Narrow-Z handlebar, TIG welded and pre-drilled for internal wiring. Made in the U.S.A.

€183.66 €230.89

Narrow-Z Old School Handlebar — 24" width, 12" rise, 1" diameter, Black

-€47.23

LA CHOPPERS Narrow-Z Old School Handlebar — 24" width, 12" rise, 1"...

High-strength steel construction with TIG welds; drilled for internal wiring; made in the U.S.A.

€183.66 €230.89

-€27.92

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar fit, Black/Chrome

Custom-tailored grips with rubber overlay; coordinate with matching shift, brake and footpegs.

€78.91 €106.83

Bourbon Handlebar — 71 cm width, 20.5 cm rise, 25.4 mm diameter, Chrome

-€58.90

LA CHOPPERS Bourbon Handlebar — 71 cm width, 20.5 cm rise, 25.4 mm...

High-strength steel tubing, TIG welded for strength and appearance, drilled for internal wiring.

€229.03 €287.93

Bourbon Handlebar — 71 cm (28"), rise 20.5 cm (8"), 25.4 mm (1") diameter, Black

-€47.23

LA CHOPPERS Bourbon Handlebar — 71 cm (28"), rise 20.5 cm (8"), 25.4 mm...

Pre-drilled Bourbon handlebar with TIG welds and internal wiring provision for a clean, functional upgrade.

€183.66 €230.89

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1"), 12.7 cm (5"), Black

Custom-tailored rubber-covered billet-aluminum grips with diamond knurled texture. Complements matching shift, brake and footpegs.

€66.77 €90.40

Bourbon Handlebar — 28" width, 1" diameter, 10" rise

-€47.23

LA CHOPPERS Bourbon Handlebar — 28" width, 1" diameter, 10" rise

Durable steel Bourbon handlebar with TIG welds and holes for internal wiring. Designed for straightforward installation and a clean cockpit.

€183.66 €230.89

Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5") length, Black, Silver

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Tailored grips that improve comfort and match shift, brake and footpegs.

€66.77 €90.40

Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5") length, Black

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Precision billet grips with a textured surface; pairs visually with matching shift, brake and footpegs. Easy installation.

€66.77 €90.40

-€29.62

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Custom-fit rubber-covered billet-aluminum grips that enhance control and complement matching shift, brake and footpegs.

€83.72 €113.34

Handlebar Riser Extensions — Rise 25.4 mm (1"), Clamp 25.4 mm (1"), Pair

-€23.61

LA CHOPPERS Handlebar Riser Extensions — Rise 25.4 mm (1"), Clamp 25.4 mm...

Precision CNC-machined
Bright finish for easy care
Includes extended mounting hardware
Made in the USA

€91.78 €115.39

-€48.31

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo T-Bar handlebar designed for maximum comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. Compatible with hydraulic clutch controls.

€164.26 €212.57

1-1/4" Buffalo T-Bar — 1-1/4" dia, 31" width, 10" rise

-€48.31

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" dia, 31" width, 10" rise

Premium 1-1/4" Buffalo T-Bar designed for comfort and control. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C.

€164.26 €212.57

1" Old School Handlebar — 24" width, 10" rise, Gloss Black

-€40.80

LA CHOPPERS 1" Old School Handlebar — 24" width, 10" rise, Gloss Black

Old-school Z-bar handlebar, TIG welded and pre-drilled for internal wiring. Made in the U.S.A.

€128.74 €169.54

$Riser Extensions — 31.8 mm (1-1/4\"), Black$

-€6.92

LA CHOPPERS Riser Extensions — 31.8 mm (1-1/4\"), Black

Makes DeLUX covers compatible with most risers via slip-fit
O-ring connectivity for a secure, rattle-free damper
Made in the USA

€20.15 €27.07

Handlebar Plug for TBW Handlebars — Raw finish

-€2.39

DRAG SPECIALTIES Handlebar Plug for TBW Handlebars — Raw finish

Closes TBW electronic throttle control notches and allows fitment on non-TBW bikes while equalizing both sides.

€5.14 €7.53

1-1/4" Old School Handlebar — 27" width, 12" rise

-€75.66

LA CHOPPERS 1-1/4" Old School Handlebar — 27" width, 12" rise

High-strength Old School handlebar with TIG-welded, polished welds. Pre-drilled for internal wiring. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on XL 883C/1200C models.

€294.23 €369.89

Handlebar Control Kit — 25.4 mm (1") clamp, hydraulic actuation, black matte

-€52.82

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm (1") clamp, hydraulic...

Complete handlebar control kit; uses OEM switches or equivalent (switches not included). Replacement parts available separately.

€205.41 €258.23

-€86.75

DRAG SPECIALTIES Handlebar Control Kit — 17.5 mm bore, 25.4 mm clamp, Black Matte

Handlebar control kit for direct replacement; uses OEM switches (not included). Replacement parts sold separately.

€337.34 €424.09

Kage Fighter Handlebar Risers — 32 mm (1-1/4"), 10 cm (4"), Black Gloss

-€13.53

LA CHOPPERS Kage Fighter Handlebar Risers — 32 mm (1-1/4"), 10 cm (4"),...

8-bolt billet aluminum clamp with hardware; designed for internal wiring; made in the USA. Precision machined for reliable performance and straightforward installation.

€52.65 €66.18

Kage Fighter Handlebar Risers — Rise 15 cm (6"), 32 mm (1-1/4") clamp, Black

-€15.67

LA CHOPPERS Kage Fighter Handlebar Risers — Rise 15 cm (6"), 32 mm...

Precision risers with an 8-bolt clamp and internal wiring design; made in the USA.

€60.92 €76.59

1-1/4" Z-Bar Style Handlebar — 1-1/4" diameter, 3" rise, 33" width

-€59.30

LA CHOPPERS 1-1/4" Z-Bar Style Handlebar — 1-1/4" diameter, 3" rise, 33"...

Original Outlaw Z-bar design; drilled for internal wiring; accepts standard risers and clamps; made in the USA. Not for use with stock clamp/gauge mounts on 883C/1200C.

€172.65 €231.95

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 10" rise, 1" clamp, 12" center width, Chrome

-€84.72

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 10"...

Touring ape hanger handlebar with batwing clearance, notched for throttle-by-wire and compatible with factory heated grips.

€329.48 €414.20

-€72.63

LA CHOPPERS [object Object]

1-1/4" Touring Ape Hanger Handlebar engineered for FLHT/FLHX "batwing" fairings; notched for throttle-by-wire, large burr-free wiring slots, accepts H-D OEM heated grips.

€282.43 €355.06

1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter, 12" rise

-€84.72

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter,...

Notched for throttle-by-wire, large burr-free wiring slots, fits FLHT/FLHX batwing fairings, allows factory heated grips and stock controls.

€329.48 €414.20

-€72.63

LA CHOPPERS [object Object]

1-1/4" Touring Ape Hanger Handlebar with clearance for FLHT/FLHX batwing fairings, notched for throttle-by-wire, large burr-free wiring slots, and compatibility with factory heated grips. Made in the U.S.A.

€282.43 €355.06

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 14" rise, 12" center width, Chrome

-€84.72

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 14"...

Touring ape hanger designed for batwing fairing fitment. Notched for throttle-by-wire. Large wiring slots; accepts factory heated grips. Made in USA.

€329.48 €414.20

-€72.63

LA CHOPPERS [object Object]

1-1/4" Touring Ape Hanger handlebar with clearance for FLHT/FLHX "batwing" fairing, notched for throttle-by-wire, laser-cut wiring slots, compatible with factory heated grips and stock controls. Made in the U.S.A.

€282.43 €355.06

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls