Handlebars & Controls (6)

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

-€6.80

MOTOGADGET mo.Switch Plain — 22 mm (7/8"), 25.4 mm (1"), 2 buttons, Black

Universal pushbutton fitting for motorcycle handlebars; CNC machined, available with two or three replaceable pushbuttons; IP65 splash protection.

€67.99 €74.79

-€6.80

MOTOGADGET mo.Switch Plain — 22 mm, 25.4 mm handlebar, 2 buttons, black

Universal pushbutton fitting for handlebars with a compact CNC-machined housing that accepts a separate electronic control (not included). IP65 splash protection and ergonomic actuation.

€67.99 €74.79

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

-€7.55

MOTOGADGET mo.Switch Plain — 3-button, fits 22 mm (7/8") and 25.4 mm (1")...

Universal pushbutton fitting for handlebars with a compact CNC-machined housing. Robust, IP65 splash-resistant buttons with ergonomic feedback; easy wiring and replaceable parts.

€75.64 €83.19

-€7.55

MOTOGADGET mo.Switch Plain — 22 mm (7/8"), 25.4 mm (1"), 3 buttons,...

Universal, high-quality pushbutton fitting for common handlebar tube diameters. CNC machined housing, configurable button layout, IP65 splash protection.

€75.64 €83.19

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

3-Ring Air Cushioned Grips — 25.4 mm (1") fit, 12.7 cm (5") length, Black/Chrome

-€14.62
Out of Stock

AVON GRIPS 3-Ring Air Cushioned Grips — 25.4 mm (1") fit, 12.7 cm (5")...

Billet end caps and rings with ergonomic AVON seamless rubber grip technology. Very soft, tacky, and durable material. Made in the U.S.A.

€56.86 €71.48

3-Ring Air Cushioned Grips — 1" handlebar, 5" length, Anodized Black

-€14.62
Out of Stock

AVON GRIPS 3-Ring Air Cushioned Grips — 1" handlebar, 5" length, Anodized...

Billet end caps and rings with AVON ergonomic seamless rubber; very soft, tacky, durable material; made in the U.S.A.

€56.86 €71.48

3-Ring Velvet Air Grips — 25.4 mm (1 in) handlebar, 11.7 cm (4-5/8 in) length, Black

-€22.16
Out of Stock

AVON GRIPS 3-Ring Velvet Air Grips — 25.4 mm (1 in) handlebar, 11.7 cm...

Soft, vibration-dampening velvet surface with internal air pockets. Billet aluminum end caps and collars included. Made in the U.S.A.

€62.70 €84.86

3-Ring Velvet Air Grips — 4-5/8" length, 25.4 mm (1") fit, Black anodized

-€14.62
Out of Stock

AVON GRIPS 3-Ring Velvet Air Grips — 4-5/8" length, 25.4 mm (1") fit,...

Soft, vibration-dampening grips with internal air pockets and a velvet-like surface. Billet aluminum end caps and collars included. Made in the U.S.A.

€56.86 €71.48

Excalibur Custom Grips — 25.4 mm (1"), Black, Chrome

-€16.04
Out of Stock

AVON GRIPS Excalibur Custom Grips — 25.4 mm (1"), Black, Chrome

Ergonomic seamless rubber grips with billet aluminum end caps. Matching pegs sold separately. Made in the USA.

€62.36 €78.40

$Excalibur Custom Grips — 25.4 mm (1\"), Black, Chrome$

-€24.38
Out of Stock

AVON GRIPS Excalibur Custom Grips — 25.4 mm (1\"), Black, Chrome

Ergonomic seamless rubber grip technology with billet aluminum end caps and collars. Matching pegs sold separately. Made in the USA.

€68.97 €93.35

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

-€18.15
Out of Stock

AVON GRIPS Gatlin Custom Grips — 25.4 mm (1"), Chrome, Black

Ergonomic seamless rubber grips with billet aluminum end caps and collars. Matching pegs sold separately. Made in the USA.

€70.63 €88.78

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€18.15
Out of Stock

AVON GRIPS Gatlin Custom Grips — 25.4 mm (1"), Black anodized

Ergonomic seamless rubber grips with billet end caps. Matching pegs sold separately. Made in the USA.

€70.63 €88.78

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

Rival Custom Grips — 25.4 mm (1") handlebar diameter, Chrome, Black

-€16.04
Out of Stock

AVON GRIPS Rival Custom Grips — 25.4 mm (1") handlebar diameter, Chrome,...

Ergonomic seamless grip design for improved control and comfort. Precision-machined end caps and collars for lasting performance. Made in the USA.

€62.36 €78.40

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls