Handlebars & Controls (6)

Kage Fighter Handlebar Risers — Rise 8" (20.5 cm), Pullback 1-1/4" (31.8 mm), Clamp 1-1/4" (32 mm), Black, Gloss

-€22.33

LA CHOPPERS Kage Fighter Handlebar Risers — Rise 8" (20.5 cm), Pullback...

8-bolt billet aluminum clamp with hardware; designed for internal wiring; made in the USA.

€86.82 €109.15

Kage Fighter Handlebar Risers — 32 mm (1-1/4") clamp, 25.5 cm (10") rise, 31.8 mm (1-1/4") pullback, Chrome

-€22.33

LA CHOPPERS Kage Fighter Handlebar Risers — 32 mm (1-1/4") clamp, 25.5 cm...

8-bolt billet aluminum clamp, internal wiring ready, made in the USA.

€86.82 €109.15

Kage Fighter Handlebar Risers — 32 mm (1-1/4") clamp, 25.5 cm (10") rise

-€22.33

LA CHOPPERS Kage Fighter Handlebar Risers — 32 mm (1-1/4") clamp, 25.5 cm...

8-bolt billet aluminum clamp with hardware; designed for internal wiring; made in the USA.

€86.82 €109.15

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 14" rise, 1" clamp, Black gloss

-€72.63

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 14" rise, 1"...

Notched for throttle-by-wire with large laser-cut, burr-free wiring slots; allows use of factory heated grips and retains all stock controls. Made in the USA.

€282.43 €355.06

Replacement Master Cylinder Assembly — 12.7 mm bore, 25.4 mm clamp, Chrome

-€21.90

DRAG SPECIALTIES Replacement Master Cylinder Assembly — 12.7 mm bore, 25.4 mm...

Accepts OEM-style rebuild kits and clears all 1-1/4" handlebars.

Brake/clutch controls, switch housings, clamps and switches sold separately.

€197.12 €219.02

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18" rise, 12" center width, Chrome

-€88.66

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18"...

High-rise ape hanger designed for batwing fairings on FLHT/FLHX models; notched for throttle-by-wire and compatible with factory heated grips.

€344.80 €433.46

Replacement Master Cylinder Assembly — 12.7 mm (1/2") bore, 25.4 mm (1") clamp, black matte

-€21.44

DRAG SPECIALTIES Replacement Master Cylinder Assembly — 12.7 mm (1/2") bore,...

Direct-replacement master cylinder accepts OEM-style rebuild kits; brake and clutch controls sold separately.

€192.93 €214.37

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18" rise, 37" width, Gloss Black

-€76.38

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18"...

Touring ape hanger designed to clear batwing fairings on FLHT/FLHX models.

Notched for throttle-by-wire with large laser-cut wiring slots for tidy routing.

Pre-drilled and knurled center; allows factory heated grips and all stock controls. Made in the USA.

€297.07 €373.45

Brake/Clutch Lever Assembly — 25.4 mm clamp, 15 mm bore (brake/clutch), Black matte

-€32.89

DRAG SPECIALTIES Brake/Clutch Lever Assembly — 25.4 mm clamp, 15 mm bore...

Durable brake and clutch lever kit with OEM-style rebuild kit compatibility and optional switch housings.

€296.02 €328.91

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 20" rise, 12" center, Chrome

-€88.66

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 20" rise,...

Clearance-designed ape hanger for FLHT/FLHX batwing fairings; notched for throttle-by-wire and accepts factory heated grips.

€344.80 €433.46

$Brake/Clutch Lever Assembly — 25.4 mm clamping, 12.7 mm bore (1/2\"), chrome, ABS$

-€26.91

DRAG SPECIALTIES Brake/Clutch Lever Assembly — 25.4 mm clamping, 12.7 mm bore...

Serviceable brake and clutch lever assembly with optional switch housings for straightforward installation and maintenance.

€242.20 €269.11

1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter, 20" rise, fits FLHT/FLHX batwing, Black gloss

-€76.38

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter,...

Designed to provide proper clearance for FLHT/FLHX batwing fairings. Notched for throttle-by-wire. Large laser-cut, burr-free wiring slots. Allows factory heated grips and all stock controls. Made in the USA.

€297.07 €373.45

Brake/Clutch Lever Assembly — 25.4 mm clamp, 12.7 mm bore, black matte

-€26.91

DRAG SPECIALTIES Brake/Clutch Lever Assembly — 25.4 mm clamp, 12.7 mm bore,...

Serviceable brake and clutch lever assembly with switch housings sold separately; may require different housings for dealer-installed cruise control.

€242.20 €269.11

1-1/4" Handlebar — 1-1/4" diameter, 10" rise, 3-1/2" clamp width, Chrome

-€81.43

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 10" rise, 3-1/2" clamp...

Ape-hanger handlebar that accepts standard grips and controls, pre-drilled and made in the USA.

€316.69 €398.12

-€20.41

DRAG SPECIALTIES Replacement Master Cylinder Assembly — 15 mm bore, 25.4 mm clamp

Accepts OEM-style rebuild kits; clearance for 1-1/4" handlebars; brake/clutch controls and switches sold separately.

€183.66 €204.07

-€81.43
Out of Stock

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 3-1/2" clamp width, 12" rise

Ape-hanger handlebar that fits stock-style clamps, accepts standard grips and controls, and supports H-D OEM heated grips. Made in the USA.

€316.69 €398.12

1-1/4" Handlebar — 1-1/4" diameter, 12" center width, 14" rise, 1" clamping diameter

-€77.96

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 12" center width, 14"...

Ape-hanger handlebar made in the USA; accepts heated grips and standard controls. Not for use with stock mounts on 883C/1200C models.

€303.17 €381.13

-€81.43

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 18" rise, 40" width, 1" clamp

For use in 1" stock-style handlebar clamps; accepts standard grips and controls; fits most models with 3-1/2" on-center risers; not for 883C/1200C mounts; accepts H-D OEM heated grips.

€316.69 €398.12

-€69.17
Out of Stock

LA CHOPPERS 1-1/4" Handlebar — 1" clamp, 3-1/2" clamp width, gloss black

Classic ape-hanger handlebar that accepts standard grips and H-D OEM heated grips. Not compatible with certain stock riser and clamp gauge mounts on 883C/1200C models.

€268.95 €338.12

-€69.17

LA CHOPPERS 1-1/4" Handlebar — 12" rise, 3-1/2" clamping width, Black

Fits 1" stock-style clamps, accepts standard grips and controls, knurled and pre-drilled center, accepts H-D OEM heated grips; not for use on 883C/1200C stock clamp/gauge mounts.

€268.95 €338.12

1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 36" width, 13" rise, 1" clamp, Chrome

-€93.77

LA CHOPPERS 1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 36"...

Classic Ape Hanger styling updated with a mitered top, two‑bend bottom, pre-drilled internal wiring and throttle-by-wire notches.

€364.67 €458.44

-€98.67

LA CHOPPERS 1-1/4" Twin Peaks Big Twin Handlebar — 19" rise, 36" width

A Twin Peaks take on the Ape Hanger with pre-drilled internal wiring, throttle-by-wire notches, and knurled center for secure controls. Accepts H-D OEM heated grips.

€383.70 €482.37

1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) diameter, 12" (30.5 cm) center width, 18" rise, Chrome

-€98.67

LA CHOPPERS 1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) diameter,...

Twin Peaks touring handlebar engineered for long-distance comfort, parallel wrist angles, easy internal wiring, and compatibility with H-D OEM heated grips.

€383.70 €482.37

1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) dia, 18" rise, 33-1/2" width, 5-1/4" pullback

-€86.79

LA CHOPPERS 1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) dia, 18"...

Touring-focused Twin Peaks handlebar that reduces wrist strain and simplifies internal wiring.

€337.45 €424.24

-€27.75

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm (1") clamp, Chrome finish

Accepts OEM switches or equivalents; switches not included. Replacement parts sold separately.

€249.71 €277.46

-€27.75

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm (1") clamp, Black matte

Complete handlebar control kit compatible with OEM switches or equivalents; replacement parts available.

€249.71 €277.46

-€32.69

DRAG SPECIALTIES Handlebar Control Kit — 32 mm (1-1/4"), Chrome

Accepts OEM switches or equivalents (not included)
Replacement parts available separately
Includes mounting hardware and fitment instructions

€294.24 €326.93

-€32.69

DRAG SPECIALTIES Handlebar Control Kit — 32 mm (1-1/4"), Black matte

Direct-fit handlebar control kit with durable construction; supports OEM switches and offers separate replacement parts.

€294.24 €326.93

-€5.76

DRAG SPECIALTIES Wide Blade Lever Set — Chrome

Late-style wide, flat lever profile; compatible with OEM lever perches and engineered for responsive control.

€51.85 €57.61

-€5.62

DRAG SPECIALTIES Wide Blade Lever Set — Hydraulic, black matte

Late-style wide, flat lever design in lightweight aluminum; compatible with OEM lever perches.

€50.58 €56.20

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls