Handlebars & Controls (5)

-€44.28

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 30" width, 5-1/2" rise, Chrome

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes; knurled center; made in U.S.A.

€125.15 €169.43

1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep,...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; TBW keyholes for late-style fitments (TBW plug required for cable throttles); knurled center for maximum clamp grip; made in U.S.A.

€134.98 €182.74

Universal Ball Mount — Aluminum, Universal fit, Black powder-coated

-€3.89

RAM MOUNTS Universal Ball Mount — Aluminum, Universal fit, Black...

Compact mirror-post base with 1" rubber ball; mounting hardware included.

€15.11 €19.00

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 30", 1" clamp, 3-1/2" rise, Black

Motocross-style low-profile bar with slotted internal wiring and unknurled finish. Made in the USA.

€131.14 €164.86

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamping, 30" width, 3-1/2" rise

Motocross-style low-profile handlebar with slotted internal wiring, smooth grip area, made in the USA.

€131.14 €164.86

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width

Classic, narrow beater bar with subtle pullback and ready for internal wiring.

€137.69 €173.10

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

-€27.46

THRASHIN SUPPLY CO. Master Cylinder Cover — Black, Silver

6061 aircraft-grade aluminum master cylinder cover; hardware included; reuses factory OEM gasket; made in the USA.

€77.72 €105.18

1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

Polished welds, slotted for internal wiring, and notched for electronic throttle; accepts heated grips and requires special risers and clamps.

€390.35 €490.73

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

Polished welds and gloss finish
Slotted for internal wiring
Notched for electronic throttle
Requires special risers and clamps
Works with OEM heated grips
Made in the USA

€409.83 €515.21

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise,...

Laser-etched Thrashin® handlebar pre-drilled for internal wiring; TBW keyholes for late-style fitments; knurled center; made in the United States.

€134.98 €182.74

-€50.64

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 31-1/2" width, 4" rise

Thrashin® handlebar with laser-etched logo, pre-drilled for internal wiring, TBW keyholes, and knurled center for improved clamp grip. Made in U.S.A.

€143.30 €193.94

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 14 cm rise, 78.5 cm width

High-bend 1" handlebar with laser-etched Thrashin® logo, drilled routing for internal wiring, TBW keyholes and knurled center for superior clamp grip.

€168.45 €228.05

$Grips — 25.4 mm (1\"), Chrome$

-€43.03

TODD'S CYCLE Grips — 25.4 mm (1\"), Chrome

Unique, top-end custom designs. Brass one-piece construction. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — Rise 25.4 mm (1"), Clamp 25.4 mm (1"), 1/2-13, Black

-€50.74

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — Rise 25.4 mm (1"),...

One-piece clamp riser kit for Bone Bar with riser tapped for standard bolts and made in the USA.

€197.38 €248.12

-€4.09

RAM MOUNTS Universal Ball Mount — 31.8 mm handlebar diameter (1-1/4"), Black

Marine-grade aluminum mount with 1" rubber ball; mirror post base fits open mirror mount holes; mounting hardware included.

€15.90 €19.99

$Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black$

-€5.65

RAM MOUNTS Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black

High-strength composite double 1" ball-socket arm with 360° center rotation and 180° swivel; rubber ball ends and central pivot for exceptional adjustability. 5" overall length.

€21.94 €27.59

-€2.25

RAM MOUNTS Mount Adapter — Black, Ball

Marine-grade construction and corrosion-resistant finish
1" rubber ball
Predrilled base holes for multiple mount options

€8.76 €11.01

-€2.88

RAM MOUNTS Universal Camera and Camcorder Adapter — Ball mount, Black

Round-base adapter with 1/4"-20 threaded stud for quick, reliable mounting to standard cameras and camcorders.

€11.23 €14.11

-€5.26

RAM MOUNTS Self-Leveling Cup Holder and Cozy with 1" Ball — Black

Self-leveling cup holder with 1" rubber ball for easy mounting; includes can insulator. Fits motorcycles and ATVs.

€20.48 €25.74

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls