Handlebars & Controls (5)

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\") handlebar,...

Thin-profile Lock-On grips with Ruffian diamond knurl pattern for improved control, traction and rider comfort.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Graphite

Moto-inspired thin-profile grips with Ruffian diamond knurl for control, medium-compound comfort, in-molded throttle tube, and billet lock-on clamp.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar, Gray

Moto-inspired thin-profile grips with Ruffian diamond knurl, medium compound, and billet aluminum Lock-On clamp.

€55.53 €75.18

-€19.62

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\"), gum rubber

Thin-profile, diamond-knurled street grips designed for V-Twin performance with improved control and comfort.

€55.56 €75.18

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

Buck-50 Handlebar — 24 cm (9-1/2") rise, 25.4 mm clamp, Black gloss

-€104.06

KHROME WERKS Buck-50 Handlebar — 24 cm (9-1/2") rise, 25.4 mm clamp,...

Aggressive riding position with a stepped design, clean cutouts for wiring, notched for throttle-by-wire, diamond knurled center, accepts heated grips.

€404.68 €508.74

Buck-50 Handlebar — 32 mm (1-1/4") clamp, 38 mm (1-1/2") bar, 30 cm (11-3/4") rise, 90 cm (35-1/2") width, gloss black

-€104.06

KHROME WERKS Buck-50 Handlebar — 32 mm (1-1/4") clamp, 38 mm (1-1/2") bar,...

Stepped design for factory clamp and perches; notched for electronic throttle control; accepts H-D OEM heated grips; made in USA.

€404.68 €508.74

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€23.58
Out of Stock

KHROME WERKS [object Object]

Durable 1" handlebar made from 14-gauge steel tubing. Manufactured in the U.S.A. Fits standard 1" clamps.

€91.72 €115.30

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

-€4.29
Out of Stock

SW-MOTECH 1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

1" ball adapter for mirror threads (M8/M10). Mounts between mirror and bar mount. Includes adapter, mounting plate, instructions and mounting hardware.

€16.72 €21.01

-€4.29
Out of Stock

SW-MOTECH Ram Extension — Ram arm, black

Extends Ram 1 inch ball systems with a second arm for improved positioning.

€16.72 €21.01

-€23.58
Out of Stock

KHROME WERKS [object Object]

Durable 1" handlebar made from 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

1" Handlebar — 25.4 mm clamp, 82.5 cm (32-1/2") width, 25.5 cm (10") rise, gloss black

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 25.4 mm clamp, 82.5 cm (32-1/2") width, 25.5 cm...

Sturdy 14-gauge steel construction, made in the U.S.A.; classic styling for custom builds.

€131.95 €165.89

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 1" clamp, 85 cm width, 34.5 cm rise, Chrome

14-gauge steel tubing. Made in the U.S.A. Classic bobber styling for custom builds.

€131.95 €165.89

-€33.94
Out of Stock

KHROME WERKS 1" Handlebar — 1" clamp, 33-1/2" width, 12" rise, Black gloss

14-gauge steel tubing for reliable strength. Designed for custom bobber and ape-hanger builds. Made in the U.S.A.

€131.95 €165.89

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls