Handlebars & Controls (5)

1-1/4" Bagger Monkey Bar Handlebar — 36.5 cm center, 40.5 cm rise, 23 cm pullback, Chrome

-€171.11
Out of Stock

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 36.5 cm center, 40.5 cm...

Hand-crafted bagger monkey bar handlebar pre-drilled for internal wiring. Fits touring models and pairs with Paul Yaffe's Bagger Nation Super Clamp.

€484.11 €655.22

$Monkey Sport Handlebar — 84 cm (33\"), 25.4 mm (1\"), 15 cm (6\"), Black$

-€153.94
Out of Stock

PAUL YAFFE BAGGER NATION Monkey Sport Handlebar — 84 cm (33\"), 25.4 mm (1\"), 15 cm...

Narrow sport handlebar that improves hand control, offers generous pullback for comfort, and installs as a direct bolt-on replacement with factory slots for internal wiring.

€435.55 €589.49

Monkey Sport Handlebar — 84 cm (33"), 25.4 mm (1") clamp, 15 cm (6") pullback, Chrome

-€153.94
Out of Stock

PAUL YAFFE BAGGER NATION Monkey Sport Handlebar — 84 cm (33"), 25.4 mm (1") clamp, 15...

Sport-oriented handlebar that’s narrower than standard bars, offering increased rotation, comfortable pullback and factory slots for internal wiring.

€435.55 €589.49

Pre-Wired Handlebar — 36" (91.5 cm), 25.4 mm clamp (1"), Chrome

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36" (91.5 cm), 25.4 mm clamp (1"), Chrome

Pre-wired option retains the OEM twist grip sensor and includes internal switch wires and connectors. Throttle-side pull wire installed for easy sensor exchange. All materials included; step-by-step instructions on the manufacturer's website. Standard Road Glide master cylinder clamp required for installing '15+ OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 36" width, 1" clamp, 1-1/4" diameter, 10" rise

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36" width, 1" clamp, 1-1/4" diameter,...

Pre-wired handlebar option with installed switch wires and throttle pull wire for easy sensor exchange. Includes all materials and step-by-step instructions.

€580.92 €786.24

Pre-Wired Handlebar — 38 cm (15"), 25.4 mm clamp

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm (15"), 25.4 mm clamp

Pre-wired handlebar kit retains the OEM twist grip sensor, includes internal switch wires and connectors, and comes with all materials and installation instructions. Note: a standard Road Glide master cylinder clamp is required for installing '15 and later OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1") clamp, Chrome

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1")...

Pre-wired handlebar retains OEM twist grip sensor; internal switch wires and connectors pre-installed. Includes throttle-side pull wire and all materials. Road Glide master cylinder clamp required for '15+ OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 36" width, 14" rise, 1" clamp diameter, Black

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36" width, 14" rise, 1" clamp diameter,...

Pre-wired handlebar option with internal switch wires and connectors pre-installed for an easier, cleaner install. All materials and step-by-step instructions provided online.

€629.13 €851.49

Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width, 14" rise, Chrome

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width,...

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easier, OEM-quality swap.

€629.13 €851.49

Pre-Wired Handlebar — 36 in width, 16 in rise, 9 in pullback, 1-1/4 in diameter

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36 in width, 16 in rise, 9 in pullback,...

Pre-wired monkey bar option with internal switch wiring and connectors installed; easy twist grip sensor exchange; includes all materials and step-by-step instructions. Requires Road Glide master cylinder clamp for '15+ CVO installs.

€629.13 €851.49

Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16") rise, 25.4 mm (1") clamp

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16")...

Pre-wired Monkey Bars with internal switch wiring and connectors for an easy, clean install; includes materials and instructions.

€629.13 €851.49

Pre-Wired Handlebar — 86.5 cm width, 32 mm clamp, 25.5 cm rise, Black

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 86.5 cm width, 32 mm clamp, 25.5 cm...

Pre-wired monkey bars with internal switch wiring and connectors installed. Includes throttle-side pull wire and all necessary materials; step-by-step instructions are available on the manufacturer website. A standard Road Glide master cylinder clamp is required for '15 and later OEM Monkey Bars on CVO models.

€580.92 €786.24

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 34" width, 1-1/4" clamp, Chrome

Pre-wired handlebar option ships with internal switch wires and connectors installed for easy, clean installation. Includes all materials and online instructions.

€580.92 €786.24

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 35" width, 12" rise, 1-1/4" clamp, Chrome

Pre-wired handlebar option with internal switch wiring and connectors installed for easy, low-effort installation.

€580.92 €786.24

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm clamp, 115 mm clamp width, Black

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easy, OEM-quality swap. All materials included.

€629.13 €851.49

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — Monkey Bar, 36" width, 32 mm clamp

Pre-wired Monkey Bars with internal switch wires and connectors installed; includes all materials and step-by-step install guidance.

€629.13 €851.49

Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2") width, Black

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2")...

Pre-wired handlebar that retains the OEM twist-grip sensor. Pre-wired Monkey Bars include internal switch wiring and connectors for easy installation. All materials included; a standard Road Glide master cylinder clamp is required for '15 and later OEM Monkey Bars on CVO models.

€629.13 €851.49

Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamping diameter, Chrome

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamping diameter,...

Pre-wired handlebar kit retaining OEM twist grip sensor. Includes internal switch wires and connectors, plus installed throttle-side pull wire. All materials included; see manufacturer instructions.

€629.13 €851.49

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls