Handlebars & Controls (5)

1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise, Chrome

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise,...

Removable nylon plug provides TBW compatibility; milled slots allow clean internal wiring and precise ergonomics.

€180.30 €244.09

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1", Polished stainless steel

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1",...

Slimline risers that provide a low-profile rise with solid clamping and straightforward installation.

€112.80 €152.71

1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm clamp, Black gloss

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — 44.5 mm rise, 25.4 mm...

Slimline risers with investment-cast stainless steel construction. Fit 1" diameter bars; accept stock 1/2" x 13 mounting hardware. Pair.

€112.80 €152.71

1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

Cast aluminum clamshell and throttle tube with chrome-plated ferrules and hardware; fits stock H‑D thread-in and clip-in cables.

€76.55 €103.63

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 25.4 mm (1") handlebar, black

Cast aluminum clamshell throttle assembly with chrome-plated ferrules and plated Allen hardware; accepts rubber grips and fits stock H-D cables.

€76.55 €103.63

-€16.03

BILTWELL Whiskey Throttle Tube — 25.4 mm (1") handlebar diameter, Black

CNC-machined 6061-T6 aluminum throttle tube that lets you fit softer aftermarket grips and routes two cables through a machined channel.

€45.31 €61.34

Murdock Handlebar Risers — 10" rise, 1" clamp

-€92.13

BILTWELL Murdock Handlebar Risers — 10" rise, 1" clamp

Investment-cast one-piece top clamp with TIG-welded 4130 chromoly uprights. Fits 1" bars and common speedo/tach clamp patterns on many stock model year Harleys.

€260.35 €352.48

Murdock Handlebar Risers — 12" rise, 1" clamp

-€92.40

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp

Investment-cast one-piece top clamp with TIG welded 4130 chromoly uprights; fits many stock Harley speedo/tach brackets.

€261.17 €353.57

Murdock Handlebar Risers — 12" rise, 1" clamp, Black

-€88.80

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Black

Investment-cast top clamp with TIG-welded chromoly uprights; fits many stock Harley speedo/tach brackets.

€259.65 €348.45

-€3.98
Out of Stock

BILTWELL Torker Grips — 1" handlebar diameter, 5" length, black

Injection-molded Krayton grips with classic surface design to absorb shock and dampen vibration; throttle sleeve not included.

€13.51 €17.49

Alumicore Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length

-€54.89

BILTWELL Alumicore Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length

Precision-forged aluminum grips with a comfortable rubber sleeve and integrated TBW-compatible gear interface.

€155.11 €210.00

Alumicore Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5") length, Black

-€54.89

BILTWELL Alumicore Grips — 25.4 mm (1") handlebar diameter, 12.7 cm...

Forged-aluminum core with a TPZ rubber sleeve and knurled surface for traction; integrated gear interface for TBW.

€155.11 €210.00

Reversible Moto Handlebar Pad — 21 cm (8-1/4"), 22 mm (7/8"), black/white

-€4.17

BILTWELL Reversible Moto Handlebar Pad — 21 cm (8-1/4"), 22 mm (7/8"),...

Double-sided pad for quick style changes with a low-profile, wrap-on design that stays secure.

€11.78 €15.95

Dual-Cable Throttle Assembly Kit — 39" cable, 1" handlebar, Black/Chrome

-€57.13

S&S CYCLE Dual-Cable Throttle Assembly Kit — 39" cable, 1" handlebar,...

Complete dual-cable throttle assembly kit with matching grips, sleeve, OEM-style throttle and idle cables, hardware, and 90° elbows.

€222.18 €279.31

-€1,212.13

S&S CYCLE Top End Kit — 74 cu in, 3-7/16" bore, 8.0:1 compression

Complete S&S top-end kit with heads, pre-fit forged pistons, and all necessary hardware for quick installation.

€3,425.64 €4,637.77

-€723.44

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

Replacement Cylinder & Piston for S&S 106" Stroker Kit — 3.875" bore, 4.5" stroke, Wrinkle Black

-€325.00

S&S CYCLE Replacement Cylinder & Piston for S&S 106" Stroker Kit —...

Replacement kit includes cylinders, forged pistons, rings, wrist pins, and gaskets; only for 88" motors. Professional assembly and clearance checks required.

€1,266.39 €1,591.39

Big Bore Cylinder Kit — 3.875" bore, 4.000" stroke, 95 cu in, Black

-€266.73

S&S CYCLE Big Bore Cylinder Kit — 3.875" bore, 4.000" stroke, 95 cu in,...

Complete Big Bore kit with cylinders, pistons, rings and gaskets; easy swap installation, made in the USA. Requires skilled technician for assembly checks.

€1,037.26 €1,303.99

-€296.17

S&S CYCLE Big Bore Cylinder Kit — Bore 3.875", Stroke 4.000", 95 cu in

Straightforward Big Bore cylinder kit that swaps into most applications; includes pistons, rings and gaskets. Made in the USA.

€1,151.75 €1,447.92

Big Bore Cylinder Kit — 97" displacement, 3.927" bore, 4.000" stroke

-€281.61

S&S CYCLE Big Bore Cylinder Kit — 97" displacement, 3.927" bore, 4.000"...

Complete bolt-in kit with cylinders, pistons, rings and gaskets; easy installation, made in USA. Requires a skilled technician.

€1,095.10 €1,376.71

Big Bore Cylinder Kit — 3.937" bore, 4.375" stroke, 107 cu in, Silver

-€310.73

S&S CYCLE Big Bore Cylinder Kit — 3.937" bore, 4.375" stroke, 107 cu in,...

Durable Big Bore upgrade with premium aluminum cylinders and cast-in iron liners. Kit includes pistons, rings and gaskets. Made in the USA. Requires skilled installation.

€1,208.41 €1,519.14

Big Bore Cylinder Kit — 3.937 in bore, 4.000 in stroke, 98 cu in, Black

-€310.73

S&S CYCLE Big Bore Cylinder Kit — 3.937 in bore, 4.000 in stroke, 98 cu...

Big Bore kit for straightforward swap-in installation; includes pistons, rings and gaskets. Professional assembly required.

€1,208.41 €1,519.14

Big Bore Cylinder Kit — 4.125" bore, 4.375" stroke, 117 cu in displacement

-€361.71

S&S CYCLE Big Bore Cylinder Kit — 4.125" bore, 4.375" stroke, 117 cu in...

Easy-install Big Bore kit; includes pistons, rings and head/base/exhaust gaskets. Made in the USA. Requires skilled technician.

€1,406.66 €1,768.37

-€361.71

S&S CYCLE Big Bore Cylinder Kit — Bore 4.125 in, Stroke 4.625 in, 124 cu in

Includes cylinders, pistons, rings and head, base and exhaust gaskets. Easy installation; made in the USA. Professional assembly required.

€1,406.66 €1,768.37

Big Bore Cylinder Kit — Bore 4.125", Stroke 4.625", 124 cu in, 11.4:1, Black

-€361.71

S&S CYCLE Big Bore Cylinder Kit — Bore 4.125", Stroke 4.625", 124 cu in,...

Complete Big Bore cylinder kit includes cylinders, pistons, rings and gaskets; easy installation, made in USA. Requires a skilled technician.

€1,406.66 €1,768.37

-€237.90

S&S CYCLE 4-1/8" Bore Cylinder — 4-5/8" stroke, fits '99-'17 Twin Cams

Cylinders with a stock bolt pattern, bored slightly under nominal size and left un-honed; designed for 124" hot set up kits and '99-'17 Twin Cams. Requires crankcase machining.

€925.17 €1,163.07

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls