Handlebars & Controls (5)

-€38.96

THRASHIN SUPPLY CO. Brake/Clutch Perch Clamps — Chrome, Left/Right

CNC-machined perch clamps with 12-point ARP hardware and US manufacturing for consistent fit and strength.

€98.54 €137.50

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise,...

Laser-etched Thrashin® handlebar pre-drilled for internal wiring; TBW keyholes for late-style fitments; knurled center; made in the United States.

€134.98 €182.74

-€50.64

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 31-1/2" width, 4" rise

Thrashin® handlebar with laser-etched logo, pre-drilled for internal wiring, TBW keyholes, and knurled center for improved clamp grip. Made in U.S.A.

€143.30 €193.94

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 14 cm rise, 78.5 cm width

High-bend 1" handlebar with laser-etched Thrashin® logo, drilled routing for internal wiring, TBW keyholes and knurled center for superior clamp grip.

€168.45 €228.05

1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25° sweep, polished

-€58.15

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1") clamp, 4" rise, 32" width, 25°...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; throttle-by-wire keyholes; knurled center for clamp grip; made in the United States.

€164.34 €222.49

1" Handlebar — Black, 32" width, 5-1/2" rise, 20° pullback

-€54.73

THRASHIN SUPPLY CO. 1" Handlebar — Black, 32" width, 5-1/2" rise, 20° pullback

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes; knurled center for maximum clamp grip; made in U.S.A.

€154.67 €209.40

1" Handlebar — 25.4 mm (1"), 32" (81.5 cm) width, 4" (10 cm) rise, Black

-€54.73

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm (1"), 32" (81.5 cm) width, 4" (10 cm)...

Pre-drilled and slotted for internal wiring.
Laser-etched Thrashin® logo.
Knurled center for maximum clamp grip.
Includes Throttle-By-Wire keyholes; cable-throttle bikes require TBW handlebar plug.

€154.67 €209.40

-€50.40

HYPERPRO CSC Steering Damper — 120 mm (4.74"), Black

Linear damping steering damper with adjustable settings, triple-function seals and nitrogen reservoir. Mounting kit sold separately.

€169.60 €220.00

-€51.14

HYPERPRO CSC Steering Damper — Black

Linear, fully adjustable steering damper with low-friction 8 mm piston rod, triple-function seals and nitrogen reservoir. Mounting kit sold separately.

€173.86 €225.00

-€36.61

HYPERPRO Steering Damper Mounting Kit — Black

Mounting kit for CSC linear steering dampers. The damper provides constant damping with 22-click adjustability; check fitment for your motorcycle.

€142.39 €179.00

Steering Damper Mounting Kit — MK-HD18-S001-B, Black

-€36.61

HYPERPRO Steering Damper Mounting Kit — MK-HD18-S001-B, Black

Bike-specific mounting kit for a linear steering damper with CSC technology. Adjustable damping with 22 clicks; requires compatible brackets for installation.

€142.39 €179.00

-€36.61

HYPERPRO Steering Damper Mounting Kit — HYPERPRO, MK-HD12-S005-B, Black

Bike-specific mounting kit required to install a CSC steering damper; includes necessary hardware for secure fitment.

€142.39 €179.00

-€21.02

THRASHIN SUPPLY CO. Handlebar Clamp — 25.4 mm (1") clamping diameter, Polished finish

Precision 6061 billet handlebar clamp for use with most '74-'24 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes. Made in the USA.

€59.43 €80.45

-€17.98

THRASHIN SUPPLY CO. Handlebar Clamp — 1" (25.4 mm), Black Anodized

6061 aircraft-grade billet aluminum clamp; fits most '74-'24 Harley-Davidson models with 3-1/2" on-center risers.

€50.90 €68.88

-€35.77

THRASHIN SUPPLY CO. OG Riser Top Clamp — 25.4 mm (1"), Chrome

Replacement top clamp for OG handlebar risers.
Underside drilled and tapped with 1/4-20 holes.
Hardware not included.
Made in USA.

€101.09 €136.86

-€53.98
Out of Stock

TRASK Assault Handlebar Risers — Rise 8", Clamp 1-1/4", Chrome

Durable risers with carbon fiber covers that hide wiring and accept 1/2"-13 bolts, made in the USA.

€209.97 €263.95

Assault Handlebar Risers — 6" rise, 1" clamping diameter, Black matte

-€73.84

TRASK Assault Handlebar Risers — 6" rise, 1" clamping diameter,...

Carbon fiber cover plates; hides wiring; accepts 1/2”-13 bolts; made in the USA.

€287.15 €360.99

-€89.98
Out of Stock

TRASK Assault Handlebar Risers — 38 mm clamping, 18 cm rise, Black

Billet aluminum risers with carbon fiber cover plates that hide wiring and accept 1/2"-13 bolts for secure mounting.

€248.79 €338.77

Handlebar Risers — 15 cm (6") rise, 25.4 mm (1") clamping, 1/2-13 thread

-€138.78

THRASHIN SUPPLY CO. Handlebar Risers — 15 cm (6") rise, 25.4 mm (1") clamping,...

Constructed of 6061 aluminum
Top clamps angled at 35° for both pullback and straight options
Fits 3-1/2" center-to-center riser spacing and standard 1" handlebars
Sold with top clamp and hardware; bolts not included
Made in the USA

€392.20 €530.98

Handlebar Risers — Rise 6.5", Pullback 1.5", Clamp 1", 1/2-13 thread, Chrome

-€167.63

THRASHIN SUPPLY CO. Handlebar Risers — Rise 6.5", Pullback 1.5", Clamp 1", 1/2-13...

Durable 6061 aluminum risers, pullback or straight options, include top clamp and hardware. Made in the USA.

€473.75 €641.38

1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter, 77.5 cm (30-1/2") width, 11.5 cm (4-1/2") rise

-€92.58

TRASK 1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter,...

Seamless DOM mild steel construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€360.06 €452.64

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls