Handlebars & Controls (4)

-€15.02

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Brake & Clutch, Black matte

Strong, precision-machined wide blade levers with anti-rattle clip and clutch pivot bushings.

€42.44 €57.46

Wide Blade Lever Set — Hydraulic actuation, Brake and Clutch, Chrome

-€14.61

DRAG SPECIALTIES Wide Blade Lever Set — Hydraulic actuation, Brake and Clutch,...

Late-style wide, flat lever profile; lightweight design and OEM perch compatibility.

€41.33 €55.94

mo-GRIPS — 22 mm (7/8"), 12.4 cm (4-7/8"), anodized black

-€11.18

MOTOGADGET mo-GRIPS — 22 mm (7/8"), 12.4 cm (4-7/8"), anodized black

Precision-machined billet-aluminum grips with an intricate profile for comfortable control; fit 25.4 mm or 22 mm handlebars, 124 mm long; sold in pairs.

€111.85 €123.03

-€2.17

DRAG SPECIALTIES Throttle Sleeve — 25.4 mm (1") handlebar fit, black polished

Smooth twist-throttle sleeve that fits most grips; easy to install and remove.

€6.14 €8.31

-€5.26

MOTOGADGET mo-Grips End Cap — Black anodized, 4000402

Matching end cap for mo.grip; provides a clean finish when not using mo.blaze.

€52.72 €57.98

-€2.49

DRAG SPECIALTIES Throttle Adjustment Spring — 10-pack, Twist Throttle, Black

Precision springs to fine-tune throttle tension and improve return and control feel.

€7.06 €9.55

-€1.58

DRAG SPECIALTIES Throttle Adjuster Screw Kit — Black, Chrome, 12-0914-B/B-HC3

Includes a stamped steel thumbwheel, tension spring, and friction spring for adjustable throttle tension.

€4.44 €6.02

-€6.03

DRAG SPECIALTIES Throttle Assembly — 25.4 mm (1") handlebar diameter, matte black

Complete dual-cable throttle assembly with matching left-hand grip and compatibility for thread-in cables.

€17.05 €23.08

Buffalo Billet Aluminum Handlebar Risers — Rise 1-1/2", 1" clamping diameter, flat black

-€27.87

DRAG SPECIALTIES Buffalo Billet Aluminum Handlebar Risers — Rise 1-1/2", 1"...

Precision-machined billet aluminum risers; accept Buffalo or OEM-style clamps with offset holes. Riser bolts sold separately. Made in USA.

€78.75 €106.62

Handlebar Riser & Top Clamp Kit — Rise 38.1 mm (1-1/2"), clamp 25.4 mm (1"), 1/2-13, Black flat

-€50.25

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — Rise 38.1 mm (1-1/2"), clamp...

Kit of two risers with a one-piece top clamp and all necessary hardware; straightforward installation. Made in the USA.

€142.00 €192.25

-€27.92

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar fit, Black/Chrome

Custom-tailored grips with rubber overlay; coordinate with matching shift, brake and footpegs.

€78.91 €106.83

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1"), 12.7 cm (5"), Black

Custom-tailored rubber-covered billet-aluminum grips with diamond knurled texture. Complements matching shift, brake and footpegs.

€66.77 €90.40

Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5") length, Black, Silver

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Tailored grips that improve comfort and match shift, brake and footpegs.

€66.77 €90.40

Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5") length, Black

-€23.63

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Precision billet grips with a textured surface; pairs visually with matching shift, brake and footpegs. Easy installation.

€66.77 €90.40

-€29.62

DRAG SPECIALTIES Custom Grips — 25.4 mm (1") handlebar diameter, 12.7 cm (5")...

Custom-fit rubber-covered billet-aluminum grips that enhance control and complement matching shift, brake and footpegs.

€83.72 €113.34

-€48.31

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo T-Bar handlebar designed for maximum comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. Compatible with hydraulic clutch controls.

€164.26 €212.57

1-1/4" Buffalo T-Bar — 1-1/4" dia, 31" width, 10" rise

-€48.31

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" dia, 31" width, 10" rise

Premium 1-1/4" Buffalo T-Bar designed for comfort and control. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C.

€164.26 €212.57

Handlebar Plug for TBW Handlebars — Raw finish

-€2.39

DRAG SPECIALTIES Handlebar Plug for TBW Handlebars — Raw finish

Closes TBW electronic throttle control notches and allows fitment on non-TBW bikes while equalizing both sides.

€5.14 €7.53

Handlebar Control Kit — 25.4 mm (1") clamp, hydraulic actuation, black matte

-€52.82

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm (1") clamp, hydraulic...

Complete handlebar control kit; uses OEM switches or equivalent (switches not included). Replacement parts available separately.

€205.41 €258.23

-€86.75

DRAG SPECIALTIES Handlebar Control Kit — 17.5 mm bore, 25.4 mm clamp, Black Matte

Handlebar control kit for direct replacement; uses OEM switches (not included). Replacement parts sold separately.

€337.34 €424.09

Brake/Clutch Lever Assembly — 25.4 mm clamp, 15 mm bore (brake/clutch), Black matte

-€67.27

DRAG SPECIALTIES Brake/Clutch Lever Assembly — 25.4 mm clamp, 15 mm bore...

Durable brake and clutch lever kit with OEM-style rebuild kit compatibility and optional switch housings.

€261.64 €328.91

Replacement Master Cylinder Assembly — 15 mm bore, 25.4 mm clamp, matte black

-€52.03

DRAG SPECIALTIES Replacement Master Cylinder Assembly — 15 mm bore, 25.4 mm...

Accepts OEM-style rebuild kits; clearance for all 1-1/4" handlebars. Brake and clutch controls, housings, clamps and switches sold separately.

€147.06 €199.09

1-1/4" Buffalo Touring Handlebar — 1-1/4" (32 mm) diameter, 12-1/2" rise, Chrome

-€59.77

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" (32 mm) diameter,...

Diamond-knurled center for internal wiring; accepts stock controls and heated grips; designed for electronic throttle control applications. Made in the USA.

€203.23 €263.00

-€59.77

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — rise 40.5 cm (16")

Diamond-knurled center, machined for internal wiring, accepts stock controls and heated grips; designed for electronic throttle control applications.

€203.23 €263.00

-€14.83

DRAG SPECIALTIES Custom Lever Set — Chrome, Aluminum, LSR, Brake & Clutch

Die-cast construction for reliable durability and control. Wide blade enhances comfort and reach. Clean, custom styling for a refined finish.

€41.91 €56.74

-€59.77

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo Touring handlebar machined for internal wiring; accepts stock controls, handlebar clamp and H-D OEM heated grips. Made in the U.S.A.

€203.23 €263.00

-€86.41

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — Silver

The 1-1/4" Buffalo Touring Handlebar features diamond-knurled design, internal wiring capability, and compatibility with stock controls, electronic throttle systems, and H-D OEM heated grips.

€244.23 €330.64

1-1/4" Buffalo Touring Handlebar — 32 mm diameter, 36" width, 12.5" rise, 25.4 mm clamp

-€48.31

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 32 mm diameter, 36" width,...

Diamond-knurled Buffalo touring handlebar that accepts stock controls and Harley-Davidson OEM heated grips; built for throttle-by-wire applications and made in the USA.

€164.26 €212.57

-€47.61

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo Touring Handlebar — diamond-knurled, machined for internal wiring, accepts stock controls and H-D OEM heated grips. Made in the U.S.A.

€161.88 €209.49

1-1/4" Buffalo Touring Handlebar — 25.4 mm clamp (1"), 3" rise, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 25.4 mm clamp (1"), 3"...

Diamond-knurled touring handlebar with internal wiring and throttle-by-wire compatibility; accepts heated grips.

€186.60 €241.49

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls