Handlebars & Controls (4)

-€19.62

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\"), gum rubber

Thin-profile, diamond-knurled street grips designed for V-Twin performance with improved control and comfort.

€55.56 €75.18

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 29" width, 10"...

Responsive handling position with comfortable ergonomics; slotted for internal wiring, crowned for throttle-by-wire systems. Some models may require longer cables and will not fit integrated lower clamp designs.

€246.60 €310.01

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm diameter, 29" width, 10" rise,...

Responsive handling position with a stepped tube for stock controls; laser-cut and slotted for internal wiring; crowned for fly-by-wire throttles.

€246.60 €310.01

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€36.99

BURLY BRAND Bikini Beach Bar Handlebar — 34.5 in width, 1 in clamp, 4.5 in...

Retro '40s bikini beach bar handlebar with knurled center and high-polish chrome finish. Pre-drilled for easy installation.

€143.84 €180.83

-€52.84

BURLY BRAND [object Object]

1-1/4" handlebar with tapered hand control area, 1" clamping section dimpled and drilled for internal wiring. May require extended cables, brake line, and wiring.

€205.50 €258.34

-€59.12
Out of Stock

BURLY BRAND [object Object]

1-1/4\" handlebar with tapered hand-control area and a 1\" dimpled, drilled clamp for internal wiring. May require extended cables or brake lines.

€229.89 €289.01

-€34.46
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar constructed from high-quality steel tubing; slotted and drilled for internal wiring; narrow center/tapered profile for narrow glide front ends.

€134.01 €168.47

-€38.37
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar: high-quality steel tubing with 3-1/2" on-center knurling, slotted and drilled for internal wiring (not for Throttle-By-Wire). Narrow center/tapered design for narrow glide front ends.

€149.20 €187.57

-€34.46
Out of Stock

BURLY BRAND [object Object]

1" Narrow Bottom Ape Hanger Handlebar in high-quality steel; slotted for internal wiring, not notched for Throttle-By-Wire, designed for narrow glide front ends.

€134.01 €168.47

-€3.43
Out of Stock

SW-MOTECH 1" Ball — Black

Mounts to an existing ram arm. For GPS, camera and GoPro mounting.

€13.38 €16.81

-€34.46
Out of Stock

BURLY BRAND [object Object]

Durable 1\" Narrow Bottom Ape Hanger handlebar in high-quality steel with 3-1/2\" on-center knurling, slotted for internal wiring; not notched for Throttle-By-Wire.

€134.01 €168.47

1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

-€4.29
Out of Stock

SW-MOTECH 1" Ball Kit for Mirror Thread — 1" ball, fits M8/M10

1" ball adapter for mirror threads (M8/M10). Mounts between mirror and bar mount. Includes adapter, mounting plate, instructions and mounting hardware.

€16.72 €21.01

-€4.29
Out of Stock

SW-MOTECH Ram Extension — Ram arm, black

Extends Ram 1 inch ball systems with a second arm for improved positioning.

€16.72 €21.01

-€119.98
Out of Stock

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete installation kit with extended brake, clutch and throttle cables plus wiring. Brake lines feature PTFE inner liner and heavy braided outer sheath. Reuses stock Throttle-By-Wire harness for easy integration.

€466.57 €586.55

-€119.98
Out of Stock

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with extended brake, clutch and throttle cables plus wiring; PTFE-lined stainless steel braided brake lines for ape-hanger handlebars.

€466.57 €586.55

-€119.98
Out of Stock

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with extended brake, clutch and throttle cables plus wiring; PTFE-lined braided brake lines and hardware for 2" riser ape hanger installs.

€466.57 €586.55

-€39.94
Out of Stock

BURLY BRAND [object Object]

1" Scrambler Handlebar that raises reach slightly for most H-D models, allows reuse of stock cables and brake lines, and is drilled for internal wiring (not notched for Throttle-By-Wire).

€155.11 €195.05

-€119.98
Out of Stock

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with extended brake, clutch and throttle cables, PTFE-lined braided brake lines, and wiring for installation with 2" risers and Burly Ape hangers.

€466.57 €586.55

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls