Handlebars & Controls (4)

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\") handlebar,...

Thin-profile Lock-On grips with Ruffian diamond knurl pattern for improved control, traction and rider comfort.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Graphite

Moto-inspired thin-profile grips with Ruffian diamond knurl for control, medium-compound comfort, in-molded throttle tube, and billet lock-on clamp.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar, Gray

Moto-inspired thin-profile grips with Ruffian diamond knurl, medium compound, and billet aluminum Lock-On clamp.

€55.53 €75.18

-€19.62

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\"), gum rubber

Thin-profile, diamond-knurled street grips designed for V-Twin performance with improved control and comfort.

€55.56 €75.18

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.

€85.00 €115.08

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€312.43 €392.77

-€76.67
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€298.17 €374.84

-€80.34
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€312.43 €392.77

-€76.50
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€297.55 €374.05

-€72.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€283.33 €356.19

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls