Handlebars & Controls (4)

1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12" (30.5 cm), Chrome

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" (32 mm), 12"...

Complete Viking handlebar kit with matched braided cables and brake lines, preloaded pull‑thru sleeving, burr‑free internal routing, and all necessary hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4" center, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, 7-3/4"...

Patented internal routing and preloaded E‑Z pull-thru sleeving for fast, clean wiring installs; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€331.15 €419.29

$1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\" clamp, 10\" rise, Chrome$

-€93.30

MAGNUM SHIELDING 1-1/4\" Viking Handlebar — 1-1/4\" diameter, 12\" center, 1\"...

Patented Viking internal wiring design for clean installations; preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and high‑luster finish.

€362.88 €456.18

1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp, Black gloss

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 12" center, 1" clamp,...

Patented internal routing for easy wiring installs; preloaded E‑Z pull‑thru sleeving; burr‑free internal radius; CNC mandrel bends and machined control mounts; not compatible with stock risers on certain models.

€376.30 €473.06

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 34-1/4" width, Chrome

Quality construction with burr-free wiring slots and CNC-bent tubing for a precise fit and comfortable yet aggressive wrist angles. Some models may require riser changes for proper fitment.

€119.82 €151.71

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width, gloss black

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width, gloss black

CNC-bent ape hanger handlebar with burr-free wiring slots and comfortable wrist angles. Some models may require riser changes for correct fit. Durable steel construction.

€108.86 €137.84

1" Handlebar — 34-5/8" width, 1" clamping diameter, gloss black

-€30.63

MAGNUM SHIELDING 1" Handlebar — 34-5/8" width, 1" clamping diameter, gloss black

Premium handlebar with precise knurling and CNC-bent construction. Installation may require riser change on some models.

€115.08 €145.71

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

-€4.79

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black/Chrome

Faithful reproduction of late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€13.55 €18.34

-€5.04

DRAG SPECIALTIES Handlebar Damper Kit — Black, Chrome, Anti-vibration

Faithful late-style reproduction; kit includes two studs, two elastomeric damper sets and four zinc-plated cup washers.

€14.24 €19.28

Handlebar Damper Kit for Early Harley Davidson Models — Riser, Black, Chrome

-€3.08

DRAG SPECIALTIES Handlebar Damper Kit for Early Harley Davidson Models — Riser,...

Replacement damper kit includes a pair of dampers and four cup washers. Meets or exceeds OEM specifications for smooth handling.

€8.70 €11.78

-€1.86

DRAG SPECIALTIES Handlebar Damper Kit — 4 Pack, Chrome, Steel

Faithful reproduction of late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€5.25 €7.11

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 1" clamp, 1-1/4" bar

Bagger-style square top handlebar engineered for riding comfort, with machined control mount, internal wiring routing, and CNC mandrel bends for a precise fit.

€371.32 €466.80

Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36" width, 12" rise, 1" clamp,...

Bagger-style handlebar engineered for comfort with machined control mount, clean internal wiring routing, and CNC mandrel bends. Works with standard controls including hydraulic clutch.

€371.32 €466.80

Crusader Square Top Handlebar — 36 in width, 14 in rise, 1 in clamp, Black gloss

-€95.48

MAGNUM SHIELDING Crusader Square Top Handlebar — 36 in width, 14 in rise, 1 in...

Bagger-style handlebar engineered for riding comfort. Machined control mount, internal wiring routing, and pre-loaded pull-thru sleeving for easy installation. CNC mandrel bent for accurate fit and Batwing clearance.

€371.32 €466.80

Top Gun T-Bar Handlebar — 1-1/4" diameter, 3-1/2" on-center, 8" rise, Black Gloss

-€79.18

MAGNUM SHIELDING Top Gun T-Bar Handlebar — 1-1/4" diameter, 3-1/2" on-center,...

Subtly curved T-bar with machined control mount, laser-cut wiring holes and slots for electronic throttle control; 1-1/4” diameter, 3-1/2" on center; preloaded for easy wiring.

€307.92 €387.10

Top Gun T-Bar Handlebar — 32 mm (1-1/4"), 88.9 mm (3-1/2") center, 25.5 cm (10") rise, Black gloss

-€79.18

MAGNUM SHIELDING Top Gun T-Bar Handlebar — 32 mm (1-1/4"), 88.9 mm (3-1/2")...

Classic T-bar styling with precision machined control mount, laser-cut wiring holes, preloaded E‑Z sleeving, and ergonomic wrist angles for comfort.

€307.92 €387.10

$Top Gun T-Bar Handlebar — 32 mm (1-1/4\"), 3-1/2\" center, Chrome$

-€83.84

MAGNUM SHIELDING Top Gun T-Bar Handlebar — 32 mm (1-1/4\"), 3-1/2\" center, Chrome

Streamlined T-bar handlebar with machined control mount, laser-cut wiring holes, CNC mandrel bending and E-Z sleeving for easy wiring.

€326.03 €409.87

Mach Moto Handlebar — 80 cm (31-1/2") width, 10 cm (4") rise, 32 mm (1-1/4") clamp, Gloss black

-€48.91

MAGNUM SHIELDING Mach Moto Handlebar — 80 cm (31-1/2") width, 10 cm (4") rise,...

Short mini-ape handlebars with CNC mandrel bends, machined control mounts, burr-free holes, and preloaded E-Z sleeving for easy wiring and comfortable ergonomics.

€190.18 €239.09

Mach Moto Handlebar — 33" width, 6" rise, 1-1/4" clamp, black gloss

-€48.91

MAGNUM SHIELDING Mach Moto Handlebar — 33" width, 6" rise, 1-1/4" clamp, black...

Shorter mini-ape handlebars with CNC mandrel construction, machined control mounts, internal wiring provisions, and ergonomic wrist angles for improved comfort.

€190.18 €239.09

Mach Moto Handlebar — 32 mm clamp, 31.5 in width, 4 in rise, Chrome

-€55.88

MAGNUM SHIELDING Mach Moto Handlebar — 32 mm clamp, 31.5 in width, 4 in rise,...

Shorter mini-ape style handlebars with CNC mandrel construction, machined control mounts, internal wiring and comfortable wrist angles.

€217.36 €273.24

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls