Handlebars & Controls (4)

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

On sale!
-€154.52

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€580.50 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1" clamp, 3-1/2" knurl

-€93.30

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 1"...

Patented internal design for easy wiring installations, preloaded E-Z sleeving, CNC mandrel bends, machined mounts, and high-luster finish.

€362.88 €456.18

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 30", 1" clamp, 3-1/2" rise, Black

Motocross-style low-profile bar with slotted internal wiring and unknurled finish. Made in the USA.

€131.14 €164.86

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamping, 30" width, 3-1/2" rise

Motocross-style low-profile handlebar with slotted internal wiring, smooth grip area, made in the USA.

€131.14 €164.86

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

$1\" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm width, 25.5 cm rise$

-€35.41

TODD'S CYCLE 1\" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm width, 25.5...

Classic beater-style handlebar with a straight, narrow profile and modest pullback. Slotted for internal wiring and finished smooth with no knurling. Made in the USA.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

1" Handlebar — 12" rise, 33-3/4" width, Chrome

-€31.05

MAGNUM SHIELDING 1" Handlebar — 12" rise, 33-3/4" width, Chrome

Burr-free wiring slots and on-center knurling; CNC-bent for fit with comfortable, aggressive wrist angles.

€116.66 €147.71

-€31.89

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, chrome

Steel handlebar with burr-free wiring slots, precise knurling and CNC-bent construction for comfortable, aggressive wrist angles.

€119.82 €151.71

-€32.70

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 12" rise, 10-3/8" pullback

Quality construction with burr-free wiring slots and center knurling. CNC-bent for precise fit and comfortable, aggressive wrist angles. Some models may require riser changes for installation.

€122.85 €155.55

$1\" Handlebar — 1\" clamping diameter, 14\" rise, 12\" center width$

-€50.25

MAGNUM SHIELDING 1\" Handlebar — 1\" clamping diameter, 14\" rise, 12\" center...

CNC-bent ape hanger handlebar with burr-free wiring slots and center knurling for secure grip and comfortable wrist angles.

€195.45 €245.70

1" Handlebar — 1" clamp diameter, 33" width, black gloss

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp diameter, 33" width, black gloss

High-quality steel handlebar with burr-free wiring slots and CNC-bent construction for a precise fit.

€108.86 €137.84

1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

-€28.98

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, 33-3/4" width

CNC-bent handlebar with burr-free wiring slots, center knurling, and aggressive wrist angles.

€108.86 €137.84

-€29.83

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 14" rise, 34-1/4" width, black gloss

CNC-bent ape hanger with burr-free wiring slots and 3-1/2” on-center knurling for secure clamping. Comfortable yet aggressive wrist angles.

€112.03 €141.86

1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 34-5/8" width, 10" rise

Quality-constructed handlebar with burr-free wiring slots, CNC-bent accuracy, and an aggressive wrist-angle profile. Some models may require riser changes.

€115.08 €145.71

-€30.63

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, Gloss Black

Quality CNC-bent handlebar with burr-free wiring slots and knurling for secure control placement.

€115.08 €145.71

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of the late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€18.34

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of late-style handlebar damper kits; includes studs, rubber dampers and zinc-plated cup washers.

€19.28

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls