Handlebars & Controls (4)

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Black flat

Thin‑profile Lock‑On street grips with Ruffian diamond knurl, medium‑compound comfort, in‑molded throttle tube and billet clamp for easy install.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\") handlebar,...

Thin-profile Lock-On grips with Ruffian diamond knurl pattern for improved control, traction and rider comfort.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Graphite

Moto-inspired thin-profile grips with Ruffian diamond knurl for control, medium-compound comfort, in-molded throttle tube, and billet lock-on clamp.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar, Gray

Moto-inspired thin-profile grips with Ruffian diamond knurl, medium compound, and billet aluminum Lock-On clamp.

€55.53 €75.18

-€19.62

ODI Ruffian Lock-On Street Grips — 25.4 mm (1\"), gum rubber

Thin-profile, diamond-knurled street grips designed for V-Twin performance with improved control and comfort.

€55.56 €75.18

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm...

Race-grade 7075-T6 alloy handlebar with internal wiring slots, TBW notches, laser-etched ODI graphics, and a knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise, black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 31-1/2" width, 1" clamp, 82 mm rise,...

Race-inspired moto bend with reinforced alloy construction, hard-anodized finish, slotted for internal wiring and TBW-ready. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80 cm width, Silver anodized

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm clamp (1-1/8"), rise 82 mm, 80...

Race-inspired handlebar with 7075-T6 construction, hard anodized finish, internal wiring slots, TBW notch, and knurled clutch end for improved grip.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm (31-1/2") width, anodized black

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") clamp, 80 cm...

Durable V-Twin MOTO handlebar built from 7075-T6 alloy with hard anodized finish, slotted for internal wiring and notched for TBW.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm rise, Black Anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 76 cm width, 70 mm...

7075-T6 alloy tracker handlebar with slotted internal wiring, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30") wide, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp (1-1/8"), 76 cm (30")...

7075-T6 alloy construction, shot-peened and hard anodized, slotted for internal wiring, notched for TBW, knurled clutch end, made in the USA.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black anodized

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm clamp, 30" width, Black...

Race-inspired tracker handlebar built from 7075-T6 alloy, shot-peened and hard-anodized, slotted for internal wiring and TBW-ready.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width (30"), 70 mm rise (2-3/4"), 43 mm pullback (1-11/16")

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm clamp (1"), 76 cm width...

Tracker-style handlebar made from 7075-T6 alloy with internal wiring slots, TBW notch, laser-etched ODI graphics, and knurled left side for improved grip.