Handlebars & Controls (4)

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

-€46.11

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground studs that reduce notch sensitivity and improve fatigue resistance. Hydraulically rolled threads and 180,000 psi aircraft-quality material. Made in the U.S.A.

€130.44 €176.55

-€2.19

KIBBLEWHITE Cylinder Dowels — Black oxide, 4-pack

OEM replacement dowels for HD® Evolution engines that ensure precise cylinder alignment and reliable fitment.

€6.23 €8.42

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

-€17.56

DAYTONA 3-Button Switch for Handlebars — Black, Chrome, Aluminum, 3...

Compact 3-button handlebar switch; fits 22.2/25.4 mm bars, Ø50 mm, 16 mm thick. Max switching current 50 mA; relay required. Icon stickers included.

€49.63 €67.19

-€17.56

DAYTONA 3-Button Switch for Handlebars — 3 buttons, Black

Compact 3-button switch for handlebars. Fits 22.2/25.4 mm bars; outer diameter 50 mm, thickness 16 mm. Max current 50 mA. No drilling required; relay needed. Icon stickers included.

€49.63 €67.19

Handlebar Switch Relay EZ — 75×30×20 mm, 12V 20A, Black

-€17.56

DAYTONA Handlebar Switch Relay EZ — 75×30×20 mm, 12V 20A, Black

Compact relay for handlebar switch wiring with dedicated outputs and short-circuit protection.

€49.63 €67.19

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€307.16 €386.14

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€50.74
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€197.38 €248.12

-€5.41
Out of Stock

RAM MOUNTS Universal Ball Mount — 31.8 mm (1-1/4"), Black, powder-coated

Compact ball mount for mirror-post installations; includes mounting hardware and a corrosion-resistant finish.

€21.02 €26.43

Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black powder-coated

-€4.09
Out of Stock

RAM MOUNTS Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black...

Compact universal ball mount that fits mirror post openings; includes 1-inch ball and mounting hardware.

€15.90 €19.99

-€2.51
Out of Stock

RAM MOUNTS Mount Adapter — Ball, Aluminum, Black, Powder-coated

Marine-grade aluminum mount adapter with a 1" rubber ball and predrilled base holes for versatile mounting.

€9.80 €12.31

-€5.26
Out of Stock

RAM MOUNTS Self-Leveling Cup Holder and Cozy with 1" Ball — 1" ball, Black

Self-leveling cup holder and cozy with included 1" rubber ball for easy arm mounting. Includes a can insulator; fits many vehicles.

€20.48 €25.74

-€2.62
Out of Stock

RAM MOUNTS Cradle for Phones and GPS — Garmin 60, Black

Durable cradle for phones and handheld GPS. Includes two nuts and bolts. Ball mount adapter not included. Contents not included.

€10.20 €12.82

-€2.62
Out of Stock

RAM MOUNTS Cradle for Phones and GPS — Nuvi 50 compatibility, Black

High-strength composite cradle for phones and GPS. Includes two nuts and bolts for compatible mounts. Device not included.

€10.20 €12.82

-€15.68
Out of Stock

RAM MOUNTS X-Grip® Mount Kit — Handlebar mount, universal fit, black

Secure, adjustable X-Grip® cradle with patented ball-and-socket system, spring-loaded holder and rubber-coated tips. Includes all mounting hardware.

€60.98 €76.66

-€14.63
Out of Stock

RAM MOUNTS X-Grip® Mount Kit — U-bolt mount, universal cradle

Secure, adjustable device mount with a patented 1" rubber ball-and-socket system, spring-loaded holder, rubber-coated tips, and included hardware. Made in the USA.

€56.91 €71.54

Spine Clip Holder with Ball for Garmin Handheld Devices — Ball, Black, Flat

-€3.09
Out of Stock

RAM MOUNTS Spine Clip Holder with Ball for Garmin Handheld Devices —...

Secures Garmin handhelds with an integrated spine connection; includes B size diamond base adapter and hardware for broad mounting compatibility.

€12.02 €15.11

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls