Handlebars & Controls (4)

-€3.98

BILTWELL Torker Grips — 25.4 mm (1"), 12.7 cm (5"), chocolate

Injection-molded Krayton synthetic rubber grips with classic surface design; throttle sleeve not included.

€13.51 €17.49

-€84.08

TRASK 1-1/4" V-Line Handlebar — 1-1/4" clamp, 30-1/2" width

Seamless DOM mild steel construction
Pre-drilled and notched for throttle-by-wire
Made in the U.S.A.

€326.99 €411.07

1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 35-1/2" width, Black

-€86.46

TRASK 1-1/4" V-Line Handlebar — 1-1/4" diameter, 1" clamp, 35-1/2"...

Seamless construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€336.24 €422.70

1" Handlebar — 1" diameter, 31" width, 4-1/4" rise, Black

-€47.77

BILTWELL 1" Handlebar — 1" diameter, 31" width, 4-1/4" rise, Black

Seamless chromoly tubing with CNC mandrel bends and precision TIG-welded joints. For aftermarket/custom use; not notched for TBW applications.

€135.01 €182.78

-€53.12

BILTWELL 1" Handlebar — 31" width, 1" clamp

Seamless 4130 chromoly tubing with 1" OD x .120" (3 mm) wall. CNC mandrel bends reduce flat spots. Precision-mitered, TIG-welded joints. For aftermarket/custom applications. Not notched for TBW applications.

€150.11 €203.23

-€14.87

JOKER MACHINE Billet Aluminum Clutch Lever — Chrome

Fully rounded finger grooves for improved comfort. Fits models with OEM-style controls. Made in the USA.

€57.85 €72.72

1-1/2” Barback Handlebar Risers — 1-3/8" rise, 3/4" pullback, 7/8" clamp, Black

-€41.22

ROX SPEED FX 1-1/2” Barback Handlebar Risers — 1-3/8" rise, 3/4" pullback,...

Approximately 1-1/2" total movement (≈1-1/4" up, 3/4" back).
Billet aluminum construction.
Works with stock cables; hardware and instructions included.
Subtle engraved Rox logo.
Made in the U.S.A.

€116.50 €157.72

Murdock O/S Risers — 1-1/8" clamp, 12" rise, Chrome

-€96.89

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 12" rise, Chrome

Investment-cast one-piece bar clamp accepts 1-1/8" handlebars; 0.120" wall chromoly uprights, CNC mounting bases, 3.5" centers, 2" pullback; sold as a pair.

€161.42 €258.31

Murdock O/S Risers — 1-1/8" clamp, 14" rise, Chrome

-€99.51

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 14" rise, Chrome

Precision investment-cast one-piece clamp with mandrel-bent uprights for 2" pullback, CNC-matched bases, TIG welded and hand-polished. Sold as a pair.

€165.79 €265.30

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 6" rise, Chrome

-€91.33
Out of Stock

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 6" rise, Chrome

Investment-cast one-piece clamp with mandrel-bent uprights for reduced reach; CNC bases fit most stock and aftermarket hardware.

€152.15 €243.48

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise

-€102.46

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise

Investment-cast one-piece clamps with mandrel-bent uprights for two inches of rearward pullback; CNC bases and stainless hardware included.

€170.69 €273.15

Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise, Black Satin

-€96.89

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 2" pullback, 14" rise,...

Investment-cast one-piece steel clamp for oversize handlebars
Mandrel-bent chromoly uprights for rearward offset
CNC-lathe-turned mounting bases accept stock and aftermarket hardware
Fits most stock and select aftermarket fork trees
TIG welded and hand polished; stainless-steel clamp hardware

€161.42 €258.31

Billet Throttle Tube — 25.4 mm (1") handlebar, dual-cable, black anodized

-€24.01

JOKER MACHINE Billet Throttle Tube — 25.4 mm (1") handlebar, dual-cable,...

Fully CNC-machined billet aluminum throttle tube with precision diamond knurl, hard black anodized finish, smooth bore, fits late-model dual Harley-Davidson throttle cables, made in the U.S.A.

€60.73 €84.74

-€84.85

BILTWELL 1" T-Bar — 1" diameter, 10" rise, 30" width, Black gloss

Precision-engineered 4130 chromoly T-bar with mandrel bends and precision-mitered, TIG-welded joints for a clean, durable finish.

€239.81 €324.66

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

On sale!
-€154.52

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€580.50 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

-€9.65

JOKER MACHINE Master Cylinder Cover — Rear, anodized black

Replaces the stock cast cover and adds billet styling. Simple installation with basic tools. Made in the U.S.A.

€27.30 €36.95

-€8.57

JOKER MACHINE Master Cylinder Cover — Rear, Chrome

Replaces the stock cast cover for a clean billet look. Made in the U.S.A.

€33.40 €41.97

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

-€100.66

BILTWELL 1" T-Bar — 1" diameter, 12" rise, 30-1/2" width, Chrome

Precision-mitered, TIG-welded T-bar made from seamless 4130 chromoly tubing; mandrel-bent to minimize flat spots.

€284.50 €385.16

-€60.97

BILTWELL Tracker O/S Handlebar — 30-1/2" width, 1-1/8" clamp, Black

Tracker O/S Handlebar with seamless 4130 chromoly construction, mandrel-formed bends, and TIG-welded joints for durable, precise control.

€172.32 €233.29

JX Design Grip Spacers — 25 mm (1") clamp, 31.7 mm (1-1/4") OD, 22.2 mm (7/8") width

-€8.72

JOKER MACHINE JX Design Grip Spacers — 25 mm (1") clamp, 31.7 mm (1-1/4")...

Art Deco and Slipstream–inspired left-side grip spacer designed by R.P. Warren. Made in the U.S.A.

€22.06 €30.78

-€16.10

JOKER MACHINE Master Cylinder Cover — Rear, Chrome

Replaces the stock cast cover for a billet-style upgrade. Made in the U.S.A.

€40.73 €56.83

1" Handlebar — 28.5" width, 2" rise, 1" clamp, Black

-€53.12

BILTWELL 1" Handlebar — 28.5" width, 2" rise, 1" clamp, Black

Mandrel-bent, TIG-welded 1" chromoly handlebar built for aftermarket and custom applications.

€150.11 €203.23

1" Handlebar — 1" clamp, 28-1/2" width, Chrome

-€57.48

BILTWELL 1" Handlebar — 1" clamp, 28-1/2" width, Chrome

Durable 1" handlebar for aftermarket and custom builds, featuring seamless 4130 chromoly construction and precision TIG-welded joints.

€162.47 €219.95

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls