Handlebars & Controls (4)

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" clamp, 36-3/4" width

Patented Viking internal design for easy wiring installs; burr-free wiring holes, machined mounts, knurled center; fits standard controls including hydraulic clutch.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" dia, 1" center, 3-1/2" clamp, Gloss black

-€87.71
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" center, 3-1/2" clamp,...

Patented internal routing design simplifies wiring installations without chafing. Burr-free internal radius and preloaded pull‑thru sleeving for quick harness routing. Precision CNC mandrel bends and machined control mounts for a refined fit and finish. Not compatible with stock risers on select models (883C, 1200C).

€329.50 €417.21

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center, 1" clamping, Black gloss

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center, 1"...

Patented internal routing with preloaded E‑Z sleeving for fast wiring, CNC mandrel bends and machined mounts for a clean, serviceable finish.

€364.35 €461.34

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 1" clamp, Black gloss

Patented Viking internal design for easy wiring installations; preloaded E‑Z pull‑thru sleeving; machined control mounts; high-luster gloss finish.

€364.35 €461.34

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39
Out of Stock

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

-€49.39
Out of Stock

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise

Cafe-style handlebar that creates a more aggressive riding position. Slotted for internal wiring, includes billet end caps, made in the U.S.A.

€192.06 €241.45

-€41.50
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, polished

Motocross-style, low-profile handlebar slotted for internal wiring. Smooth, unknurled surface. Made in the U.S.A.

€161.39 €202.89

1" Moto Bar Handlebar — 30" width, 3-1/2" rise, 1" clamp, sandblast finish

-€36.81
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 30" width, 3-1/2" rise, 1" clamp,...

Low-profile motocross-style handlebar with slotted internal wiring, no knurling, made in the U.S.A.

€143.14 €179.95

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1") clamp, 88.9 mm (3-1/2") rise, Gloss Black

-€33.72
Out of Stock

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1") clamp, 88.9...

Low-profile motocross-style bar slotted for internal wiring, no knurling. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise

-€41.50
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 70.5 cm (27-3/4") width,...

Classic beater handlebar with a straight, narrow profile, internal wiring slotting, and a smooth, unknurled finish. Made in the U.S.A.

€161.39 €202.89

1" Beater Bar Handlebar — 25.4 mm (1") clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Flat Black

-€36.22
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm (1") clamp, 70.5 cm...

Classic, straight beater handlebar with slotted wiring and a smooth, unknurled finish. Made in the U.S.A.

€140.84 €177.06

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41
Out of Stock

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, Polished

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic, narrow beater-style handlebar with a comfortable wrist angle; slotted for internal wiring; made in the U.S.A.

€275.48 €346.32

-€64.81
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 1-1/4" dia, 33-3/4" wide, Black gloss

Classic, narrow beater handlebar with a comfortable wrist angle; slotted for internal wiring, pre-drilled and notched for Throttle-By-Wire.

€252.06 €316.87

1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4") width, 12 cm (4-3/4") pullback

-€68.06
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm (1-1/4") diameter, 85.5 cm (33-3/4")...

Classic beater-style handlebar: straight, narrow profile with a comfortable wrist angle and slotted wiring for a clean build.

€264.66 €332.72

-€61.52
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 30-1/2" width, 1-1/4" clamp, polished

Classic, simple beater bar with a comfortable wrist angle. Slotted for internal wiring, pre-drilled and knurled at the center. Made in the U.S.A.

€239.20 €300.72

$1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise, Black gloss$

-€68.06
Out of Stock

TODD'S CYCLE 1-1/4\" Beater Bar — 32 mm clamp, 77.5 cm width, 25.5 cm rise,...

Classic 1-1/4" Beater Bar with a straight, narrow profile and comfortable wrist angle. Slotted for internal wiring and pre-drilled for easy installation.

€264.66 €332.72

-€68.02
Out of Stock

ACCUTRONIX Custom Rear Master Cylinder Assembly — Chrome, Aluminum

5/8" bore rear master cylinder assembly with side-exit 3/8"-24 thread, 35° 10 mm banjo and 2-1/4" bolt pattern. Made in the U.S.A.

€264.52 €332.54

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 32" width, 11" rise, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 32" width, 11"...

Strip-style ape hanger handlebar with polished welds; slotted for internal wiring; notched for throttle-by-wire; pre-drilled; accepts heated grips; requires special risers and clamps; made in the United States.

€346.41 €435.48

1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise, 32" width, Flat Black

-€84.83
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise,...

Strip-style handlebar with concealed wiring, polished welds and throttle notches. Requires special risers and clamps; works with OEM heated grips.

€329.90 €414.73

$1-1/2\" Strip Handlebar — 38 mm clamp, 15\" rise, Chrome$

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2\" Strip Handlebar — 38 mm clamp, 15\" rise, Chrome

Strip handlebar with polished welds, slotted for internal wiring and notched for electronic throttle. Pre-drilled and accepts heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35")...

Strip-style handlebar with internal wiring routing, throttle notches, polished welds and pre-drilled controls. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 35" (89 cm) width, Gloss black

-€82.94
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 35" (89 cm)...

Strip handlebar with internal wiring slots and a throttle notch. Polished welds, accepts OEM heated grips; requires special risers and clamps. Made in the U.S.A.

€322.53 €405.47

1" Handlebar — 1" clamp, 33" width, 10" rise, Chrome

-€34.50
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 33" width, 10" rise, Chrome

Manufactured with burr-free wiring slots and CNC-bent for accurate fit; center knurling improves clamp engagement. May require different risers on some bikes.

€129.63 €164.13

1" Handlebar — 1" clamping diameter, 12" rise, 33-3/4" width, chrome

-€31.05
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 1" clamping diameter, 12" rise, 33-3/4" width,...

Quality steel ape hanger handlebar with burr-free wiring slots and CNC-bent fit for a comfortable, aggressive look.

€116.66 €147.71

1" Handlebar — 1" clamping, 10" rise, 34-5/8" width, 3-1/2" clamp

-€36.34
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 10" rise, 34-5/8" width, 3-1/2" clamp

Quality CNC-bent handlebars with burr-free wiring slots and center knurling for secure control. Designed for a comfortable but aggressive wrist angle.

€136.50 €172.84

-€32.70
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 12" rise, Ape Hanger Bagger, Chrome

Quality steel construction with burr-free wiring slots and 3-1/2” on-center knurling.

CNC-bent for precise fit with comfortable but aggressive wrist angles.

May require riser change if original center section diameter exceeds 1".

€122.85 €155.55

-€50.25
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 12" center, 1" clamp, 14" rise, Chrome

CNC-bent 1" handlebar with burr-free wiring slots and 3-1/2” knurling for secure control. Comfortable, aggressive wrist angles. Some models require 1" ID risers.

€195.45 €245.70

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls