Handlebars & Controls (4)

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, Chrome

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal routing for complete harness installations
Burr-free internal peak and preloaded E‑Z pull-thru sleeving
CNC mandrel bends and machined control mounts
Pre-drilled wiring holes and TBW notches; not for use with stock risers on 883C/1200C

€366.17 €463.64

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal Viking design for easy full-harness routing; preloaded with E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts.

€366.17 €463.64

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" clamp, Chrome

Patented internal routing and preloaded E-Z sleeving for simple wiring installations; CNC mandrel bends and machined mounts with high-luster finish. Not for use with stock risers on 883C and 1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width, Chrome

-€97.47

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width,...

Patented internal routing and E‑Z pull‑thru sleeving for easy wiring installs; CNC mandrel bends and machined control mounts; high-luster chrome finish. Not for stock risers on 883C/1200C.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") center clamp, 19.5 cm (7-3/4") center width, Black gloss

-€103.70

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4") diameter, 25.4 mm...

Patented internal wiring channel for easy harness installation. Preloaded with E‑Z pull‑thru sleeving. CNC mandrel bends and machined control mounts. Not compatible with stock risers or clamp-on assemblies on 883C and 1200C.

€403.28 €506.98

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 1" clamp, Black gloss

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal routing and preload E‑Z sleeving make wiring harness installations fast and clean.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 3-1/2" clamp width, gloss black

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal wiring channel for clean installations, preloaded E‑Z sleeving, CNC mandrel bends and machined control mounts. Not compatible with stock risers on 883C and 1200C.

€329.50 €417.21

1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14" rise, 35-1/4" width

-€96.99

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" center section, 14"...

Patented internal design for easy wiring installations; preloaded E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts. Not for use with stock risers on 883C and 1200C.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, 16" rise

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal design for easier wiring installations; preloaded with E-Z pull-thru sleeving, knurled center, and machined control mounts for a high-luster finish.

€364.35 €461.34

1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise, Black gloss

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 1" clamp, 29-1/4" width, 3" rise,...

Cafe-style handlebars with billet end caps, slotted for internal wiring, fits 3-1/2" on-center risers. Made in the U.S.A.

€192.06 €241.45

1" Speed Cafe Handlebar — 29-1/4" width, 1" clamp, fits 3-1/2" risers

-€49.39

TODD'S CYCLE 1" Speed Cafe Handlebar — 29-1/4" width, 1" clamp, fits 3-1/2"...

Cafe-style handlebar with billet end caps, slotted for internal wiring, and made in the USA.

€192.06 €241.45

1" Moto Bar Handlebar — 1" clamp, 30" width, 3-1/2" rise, polished

-€41.50

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, 3-1/2" rise,...

Motocross-style low-profile bar; slotted for internal wiring; no knurling; made in the USA.

€161.39 €202.89

1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm (3-1/2") rise

-€36.81

TODD'S CYCLE 1" Moto Bar Handlebar — 76 cm (30"), 25.4 mm (1"), 88.9 mm...

Motocross-style low-profile bar, slotted for internal wiring, no knurling, made in the USA.

€143.14 €179.95

1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4") width, 20.5 cm (8") rise, Polished

-€41.50

TODD'S CYCLE 1" Beater Bar Handlebar — 25.4 mm clamp, 70.5 cm (27-3/4")...

Classic, minimalist beater handlebar with internal wiring slots and a narrow, low profile.

€161.39 €202.89

-€36.22

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Black

Classic, simple beater design
Straight, narrow style with measured pullback
Slotted for internal wiring
No knurling for a smooth finish
Made in the USA

€140.84 €177.06

-€70.84
Out of Stock

TODD'S CYCLE 1-1/4" Beater Bar — 1-1/4" diameter, 33-3/4" width, 1" clamp

Classic beater bar: straight, narrow and comfortable with internal wiring provision.

€275.48 €346.32

1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width, Black

-€64.81

TODD'S CYCLE 1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width,...

Classic narrow beater bar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€252.06 €316.87

$1-1/4\" Beater Bar — 1-1/4\" diameter, 33-3/4\" width, 1\" clamp$

-€68.06

TODD'S CYCLE 1-1/4\" Beater Bar — 1-1/4\" diameter, 33-3/4\" width, 1\" clamp

Classic straight, narrow beater handlebar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€264.66 €332.72

1-1/4" Beater Bar — 32 mm clamp, 77.5 cm (30-1/2") width, 25.5 cm (10") rise

-€61.52

TODD'S CYCLE 1-1/4" Beater Bar — 32 mm clamp, 77.5 cm (30-1/2") width, 25.5...

Classic, compact beater bar with comfortable wrist angle, internal wiring slots, and a knurled center. Made in the U.S.A.

€239.20 €300.72

-€68.06

TODD'S CYCLE 1-1/4" Beater Bar — 1-1/4" clamp, 30-1/2" width, 4-3/4" pullback

Classic beater handlebar with a narrow, straight profile and comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€264.66 €332.72

1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm...

Strip-style handlebar with polished welds, internal wiring slots and throttle notch; requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 28 cm rise, 81.5 cm (32") width

-€84.83

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 28 cm rise, 81.5 cm...

Strip-style handlebar with slotted internal wiring, notched for electronic throttle, polished welds, and OEM heated grip compatibility.

€329.90 €414.73

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm (33-1/4") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm...

Strip handlebar with polished welds, slotted for internal wiring, notched for electronic throttle, pre-drilled and compatible with OEM heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 45.5 cm (18") rise, 89 cm (35") width

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 45.5 cm...

Strip ape hanger with notched throttle and internal wiring slots. Polished welds and a smooth finish. Requires special risers and clamps.

€346.41 €435.48

1" Handlebar — 1" clamp, 10" rise, chrome

-€34.50

MAGNUM SHIELDING 1" Handlebar — 1" clamp, 10" rise, chrome

Quality construction with burr-free wiring slots and CNC-formed wrist angles for confident control.

€129.63 €164.13

1" Handlebar — 1" clamping diameter, 34-5/8" width, 10" rise

-€36.34

MAGNUM SHIELDING 1" Handlebar — 1" clamping diameter, 34-5/8" width, 10" rise

Quality steel handlebar with CNC-bent fit and an aggressive yet comfortable wrist angle.

€136.50 €172.84

-€32.70
Out of Stock

MAGNUM SHIELDING 1" Handlebar — 1" clamping, 12" rise, 10-3/8" pullback

Quality construction with burr-free wiring slots and center knurling. CNC-bent for precise fit and comfortable, aggressive wrist angles. Some models may require riser changes for installation.

€122.85 €155.55

$1\" Handlebar — 1\" clamping diameter, 14\" rise, 12\" center width$

-€50.25

MAGNUM SHIELDING 1\" Handlebar — 1\" clamping diameter, 14\" rise, 12\" center...

CNC-bent ape hanger handlebar with burr-free wiring slots and center knurling for secure grip and comfortable wrist angles.

€195.45 €245.70

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls