Handlebars & Controls (4)

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1"), Black

Moto-inspired thin-profile grips with a full-knurl diamond pattern for improved control, traction and comfort; includes throttle tube and a billet clamp for easy fitment.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1")

Thin-profile Ruffian street grips with full-knurl diamond pattern, medium compound comfort, and an in-molded throttle tube for precise control.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 1" handlebar, Black

Moto-inspired thin-profile grips with a full-knurl diamond pattern for superior traction and feedback. Proprietary medium-compound improves comfort and durability; includes in-molded throttle tube and billet aluminum lock-on clutch-side clamp for easy installation.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 1" handlebar, Lock-On

High-performance Lock-On grips with the Ruffian diamond knurl pattern, a thin profile for enhanced control and feedback, and an integrated throttle tube for straightforward fitment.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar, Gray

Moto-inspired diamond-knurled grips with a thin profile, medium compound comfort, and a billet aluminum lock-on clamp for easy install.

€55.53 €75.18

-€19.65

ODI Ruffian Lock-On Street Grips — 1" handlebar, Gray

Moto-inspired design for V-Twin performance
Full-knurl diamond texture for traction and feedback
Thin profile for precise control and feel
Medium-compound durometer for comfort and durability
Includes in-molded throttle tube and Lock-On clutch-side clamp

€55.53 €75.18

Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar fit, gum rubber

-€19.62

ODI Ruffian Lock-On Street Grips — 25.4 mm (1") handlebar fit, gum...

Thin-profile Ruffian grips with full-knurl diamond pattern, proprietary medium compound and Lock-On clamp for easy installation.

€55.56 €75.18

-€18.83
New

ODI Hart-Luck Signature V-Twin Lock-On™ Grips — 25.4 mm (1"), Black

Billet-aluminum lock-on grips with a full-waffle pattern for reduced vibration and reliable, slip-free mounting. Easy installation and removal.

€53.23 €72.06

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Left, black anodized

Protects boot from heat and moving parts; bike-specific fit; easy mounting; instructions and mounting material included.

€33.42 €42.02

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls