Handlebars & Controls (33)

Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1") clamp, Chrome

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1")...

Pre-wired handlebar retains OEM twist grip sensor; internal switch wires and connectors pre-installed. Includes throttle-side pull wire and all materials. Road Glide master cylinder clamp required for '15+ OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 38 cm center width, 25.4 mm clamp, 32 mm diameter, Black

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm center width, 25.4 mm clamp, 32 mm...

Pre-wired monkey bar handlebar with internal switch wires and connectors for easy, factory-style installation.

€629.13 €851.49

Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width, 14" rise, Chrome

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width,...

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easier, OEM-quality swap.

€629.13 €851.49

Pre-Wired Handlebar — 36" width, 16" rise, 1-1/4" dia, 1" clamp, Black

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36" width, 16" rise, 1-1/4" dia, 1"...

Pre-wired Monkey Bars with internal switch wiring and included materials for an easy install; online instructions provided. Requires Road Glide master cylinder clamp for '15+ CVO installs.

€629.13 €851.49

Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16") rise, 25.4 mm (1") clamp

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16")...

Pre-wired Monkey Bars with internal switch wiring and connectors for an easy, clean install; includes materials and instructions.

€629.13 €851.49

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 34" width, 10" rise

Pre-wired Monkey Bars with internal switch wiring and connectors installed; includes all materials and step-by-step instructions.

€580.92 €786.24

Pre-Wired Handlebar — 32 mm (1-1/4") clamping diameter, 34" width, Chrome

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") clamping diameter, 34"...

Pre-wired Monkey Bars with internal switch wires and connectors installed; includes all materials and install instructions.

€580.92 €786.24

-€205.32

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 35" width, 12" rise, 1-1/4" clamp, Chrome

Pre-wired handlebar option with internal switch wiring and connectors installed for easy, low-effort installation.

€580.92 €786.24

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm clamp, 115 mm clamp width, Black

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easy, OEM-quality swap. All materials included.

€629.13 €851.49

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — Monkey Bar, 36" width, 32 mm clamp

Pre-wired Monkey Bars with internal switch wires and connectors installed; includes all materials and step-by-step install guidance.

€629.13 €851.49

Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamp, 16" rise, Black

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamp, 16" rise,...

Pre-wired monkey bar handlebar with internal switch wiring and installed throttle pull wire for easy twist-grip swaps. Includes all materials and online instructions.

€629.13 €851.49

Pre-Wired Handlebar — 36-1/2" width, 16" rise, 1-1/4" clamp, Chrome

-€222.36

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36-1/2" width, 16" rise, 1-1/4" clamp,...

Pre-wired handlebar that preserves the OEM twist grip sensor and includes internal switch wires and connectors for easy installation. Throttle-side pull wire simplifies sensor exchange. Standard Road Glide master cylinder clamp required for '15+ OEM Monkey Bars on CVO models.

€629.13 €851.49

Moto 2.0 Handlebar — Black gloss, 32" width, 1" diameter, 4-1/2" rise

-€34.38

TODD'S CYCLE Moto 2.0 Handlebar — Black gloss, 32" width, 1" diameter,...

Motocross-style handlebar with slotted center and knurled clamp area. Made in the USA; check riser compatibility before fitting.

€133.70 €168.08

Moto 2.0 Handlebar — 32 in width, 1-1/4 in clamp

-€47.66

TODD'S CYCLE Moto 2.0 Handlebar — 32 in width, 1-1/4 in clamp

Motocross-style handlebar with an aggressive profile, slotted for internal wiring and a knurled center for secure clamping. Made in the USA.

€185.35 €233.01

Moto 2.0 Handlebar — 32" width, 32 mm clamp, 25.4 mm bar

-€39.41

TODD'S CYCLE Moto 2.0 Handlebar — 32" width, 32 mm clamp, 25.4 mm bar

Motocross-style handlebar with an aggressive profile, slotted for internal wiring and a knurled center. Requires compatible risers.

€153.20 €192.61

Moto 2.0 Handlebar — 80.5 cm width, 32 mm clamp, 11.5 cm rise

-€34.38

TODD'S CYCLE Moto 2.0 Handlebar — 80.5 cm width, 32 mm clamp, 11.5 cm rise

Motocross-style handlebar with aggressive profile, slotted for internal wiring, knurled center, made in the USA.

€133.70 €168.08

Moto 2.0 Handlebar — 31-3/4" width, 1-1/4" clamp, 1" tube

-€47.66

TODD'S CYCLE Moto 2.0 Handlebar — 31-3/4" width, 1-1/4" clamp, 1" tube

Motocross-style handlebar with an aggressive profile, slotted for internal wiring and a knurled center. Requires risers that accept 1" handlebars. Made in the USA.

€185.35 €233.01

Moto 2.0 Handlebar — 25.4 mm diameter, 80.5 cm width, 32 mm clamp, 11.5 cm rise

-€39.41

TODD'S CYCLE Moto 2.0 Handlebar — 25.4 mm diameter, 80.5 cm width, 32 mm...

Motocross-style handlebar with slotted internal wiring and knurled center; requires risers that accept 1" handlebars. Made in the USA.

€153.20 €192.61

1-1/4" Touring Handlebar — 1-1/4" clamping, 11-1/2" center width, 10" rise, Chrome

-€99.91

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamping, 11-1/2" center...

Touring handlebar with knurled center, OEM-compatible wire exit, adjustable fit and hydraulic-clutch compatibility.

€388.56 €488.47

1-1/4" Touring Handlebar — 10" rise, 35-1/4" width, Black gloss

-€88.79

TODD'S CYCLE 1-1/4" Touring Handlebar — 10" rise, 35-1/4" width, Black gloss

Touring-quality ape hanger handlebar with knurled clamp area, OEM-compatible fitment, adjustable angle, and hydraulic clutch compatibility.

€345.28 €434.07

1-1/4" Touring Handlebar — 1-1/4" clamp, 13" rise, 35-1/4" width, Chrome

-€99.91

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 13" rise, 35-1/4"...

Chrome ape hanger touring handlebar with knurled center, accepts heated grips, works with hydraulic clutches, OEM-fit.

€388.56 €488.47

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 35-1/4" width, Black

-€88.79

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 35-1/4"...

Reinforced, knurled clamping area; works with OEM riser and clamps; no stock pin removal; over 35° adjustment; compatible with hydraulic clutches.

€345.28 €434.07

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter, Chrome

-€98.27

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamping diameter,...

Ape hanger touring handlebar with knurled center, internal wiring and heated-grip compatibility. Works with OEM risers and hydraulic clutches. Sold each.

€382.11 €480.38

1-1/4" Touring Handlebar — 32 mm clamping, 11" rise, Gloss Black

-€90.84

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm clamping, 11" rise, Gloss Black

Touring ape hanger with knurled center, internal wiring, OEM-compatible fitment, adjustable angle, made in the U.S.A.; accepts heated grips and works with hydraulic clutches.

€353.20 €444.04

1-1/4" Touring Handlebar — 1-1/4" clamp, 13" rise, 9" center width, Chrome

-€101.95

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 13" rise, 9" center...

A knurled, touring-style ape hanger built to work with OEM risers and clamps. Made in the U.S.A.; compatible with hydraulic clutches and internal wiring.

€396.49 €498.44

$1-1/4\" Touring Handlebar — 32 mm (1-1/4\") diameter, 33 cm (13\") rise, 82 cm (32-1/4\") width$

-€90.84

TODD'S CYCLE 1-1/4\" Touring Handlebar — 32 mm (1-1/4\") diameter, 33 cm...

Knurled clamping area, internal wiring, fits OEM riser and clamps, compatible with hydraulic clutches. Made in the U.S.A.

€353.20 €444.04

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 15" rise, 32-3/4" width, Ape Hanger

-€101.95

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 15" rise, 32-3/4"...

Knurled clamping area for a secure fit. Fits OEM riser and clamps with correct wire exit. No need to remove the stock pin; offers wide adjustment and works with hydraulic clutches. Made in the U.S.A.

€396.49 €498.44

1-1/4" Touring Handlebar — 1-1/4" clamp, 15" rise, 32-3/4" width, Black

-€90.84

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 15" rise, 32-3/4"...

Classic ape-hanger styling with a knurled clamping area; fits OEM riser and clamps, accepts heated grips, compatible with hydraulic clutches.

€353.20 €444.04

1-1/4" Touring Handlebar — 1-1/4" clamp, 18" rise, 33-1/2" width

-€101.95

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 18" rise, 33-1/2" width

Made in the U.S.A. Fits OEM riser and clamps with the correct wire exit. No need to remove the stock pin; more than 35° of adjustment. Compatible with hydraulic clutches.

€396.49 €498.44

1-1/4" Touring Handlebar — 32 mm (1-1/4"), Rise 45.5 cm (18"), Black Gloss

-€90.84

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), Rise 45.5 cm (18"),...

Knurled center clamp area, OEM riser/clamp compatible, over 35° of adjustment, works with hydraulic clutches.

€353.20 €444.04

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls