Handlebars & Controls (33)

Pre-Wired Handlebar — 38 cm (15"), 25.4 mm clamp

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm (15"), 25.4 mm clamp

Pre-wired handlebar kit retains the OEM twist grip sensor, includes internal switch wires and connectors, and comes with all materials and installation instructions. Note: a standard Road Glide master cylinder clamp is required for installing '15 and later OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1") clamp, Chrome

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 38 cm (15") center width, 25.4 mm (1")...

Pre-wired handlebar retains OEM twist grip sensor; internal switch wires and connectors pre-installed. Includes throttle-side pull wire and all materials. Road Glide master cylinder clamp required for '15+ OEM Monkey Bars on CVO models.

€580.92 €786.24

Pre-Wired Handlebar — 36" width, 14" rise, 1" clamp diameter, Black

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36" width, 14" rise, 1" clamp diameter,...

Pre-wired handlebar option with internal switch wires and connectors pre-installed for an easier, cleaner install. All materials and step-by-step instructions provided online.

€629.13 €851.49

Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width, 14" rise, Chrome

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 1" clamp, 1-1/4" diameter, 36" width,...

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easier, OEM-quality swap.

€629.13 €851.49

Pre-Wired Handlebar — 36 in width, 16 in rise, 9 in pullback, 1-1/4 in diameter

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36 in width, 16 in rise, 9 in pullback,...

Pre-wired monkey bar option with internal switch wiring and connectors installed; easy twist grip sensor exchange; includes all materials and step-by-step instructions. Requires Road Glide master cylinder clamp for '15+ CVO installs.

€629.13 €851.49

Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16") rise, 25.4 mm (1") clamp

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") diameter, 40.5 cm (16")...

Pre-wired Monkey Bars with internal switch wiring and connectors for an easy, clean install; includes materials and instructions.

€629.13 €851.49

Pre-Wired Handlebar — 86.5 cm width, 32 mm clamp, 25.5 cm rise, Black

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 86.5 cm width, 32 mm clamp, 25.5 cm...

Pre-wired monkey bars with internal switch wiring and connectors installed. Includes throttle-side pull wire and all necessary materials; step-by-step instructions are available on the manufacturer website. A standard Road Glide master cylinder clamp is required for '15 and later OEM Monkey Bars on CVO models.

€580.92 €786.24

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 34" width, 1-1/4" clamp, Chrome

Pre-wired handlebar option ships with internal switch wires and connectors installed for easy, clean installation. Includes all materials and online instructions.

€580.92 €786.24

-€205.32
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 35" width, 12" rise, 1-1/4" clamp, Chrome

Pre-wired handlebar option with internal switch wiring and connectors installed for easy, low-effort installation.

€580.92 €786.24

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm clamp, 115 mm clamp width, Black

Pre-wired handlebar kit with internal switch wiring and connectors installed for an easy, OEM-quality swap. All materials included.

€629.13 €851.49

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — Monkey Bar, 36" width, 32 mm clamp

Pre-wired Monkey Bars with internal switch wires and connectors installed; includes all materials and step-by-step install guidance.

€629.13 €851.49

Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2") width, Black

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 32 mm (1-1/4") clamp, 92.5 cm (36-1/2")...

Pre-wired handlebar that retains the OEM twist-grip sensor. Pre-wired Monkey Bars include internal switch wiring and connectors for easy installation. All materials included; a standard Road Glide master cylinder clamp is required for '15 and later OEM Monkey Bars on CVO models.

€629.13 €851.49

Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamping diameter, Chrome

-€222.36
Out of Stock

PAUL YAFFE BAGGER NATION Pre-Wired Handlebar — 36-1/2" width, 1-1/4" clamping diameter,...

Pre-wired handlebar kit retaining OEM twist grip sensor. Includes internal switch wires and connectors, plus installed throttle-side pull wire. All materials included; see manufacturer instructions.

€629.13 €851.49

1-1/4" Touring Handlebar — 1-1/4" diameter, 34-3/4" width, Chrome

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, 34-3/4" width, Chrome

Direct bolt-on upgrade for Road Glide models; knurled center, accepts H-D heated grips, works with stock controls.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" (32 mm) diameter, 34-3/4" (88.5 cm) width, 10" (25.5 cm) rise, Black Gloss

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" (32 mm) diameter, 34-3/4"...

Direct bolt‑on upgrade for Road Glide. Includes control clamps to replace oversize OEM clamps, knurled center for extra grip, accepts H-D OEM heated grips, and works with stock controls and TBW or cable throttles. Made in the U.S.A.

€200.05 €270.84

1-1/4" Touring Handlebar — 32 mm (1-1/4"), Rise 30.5 cm (12"), Width 91 cm (35-3/4")

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 32 mm (1-1/4"), Rise 30.5 cm (12"),...

Direct bolt-on upgrade for Road Glide; includes black control clamps, knurled riser for extra grip, accepts H-D OEM heated grips, TBW compatible.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" diameter, fits Road Glide, black gloss

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, fits Road Glide,...

Direct bolt-on 1-1/4" touring handlebar for Road Glide models; knurled center, accepts H‑D heated grips, works with stock controls and TBW or cable throttles.

€200.05 €270.84

1-1/4" Touring Handlebar — 1-1/4" diameter, 14" rise, 36-3/4" width, Chrome

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, 14" rise, 36-3/4"...

Direct bolt-on upgrade for Road Glide models. Includes black control clamps, knurled riser area, accepts H-D OEM heated grips, and works with stock controls. Compatible with TBW or cable throttles.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" clamp, 14" rise, Black gloss

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 14" rise, Black gloss

Direct bolt-on upgrade for Road Glide; includes black control clamps, knurled riser area, accepts H‑D heated grips, works with stock controls, TBW or cable throttle, >35° adjustment.

€200.05 €270.84

1-1/4" Touring Handlebar — 1-1/4" diameter, Chrome

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, Chrome

Direct bolt-on upgrade for Road Glide; includes black control clamps; accepts H-D heated grips; works with stock controls.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" clamp, 16" rise, 37-1/2" width, black gloss

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 16" rise, 37-1/2"...

Direct bolt-on upgrade for Road Glide with black control clamps, knurled riser, accepts H‑D heated grips, works with stock controls, TBW or cable throttle; made in the U.S.A.

€200.05 €270.84

1-1/4" Touring Handlebar — 1-1/4" clamp, 18" rise, 37-1/2" width, Chrome

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 18" rise, 37-1/2"...

Direct bolt-on Road Glide upgrade with black control clamps, knurled riser area, and compatibility with heated grips and TBW.

€244.23 €330.64

1-1/4" Touring Handlebar — 18" rise, Black gloss

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 18" rise, Black gloss

Direct bolt-on upgrade for Road Glide with black control clamps, knurled riser, accepts H-D OEM heated grips and works with TBW or cable throttles.

€200.05 €270.84

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 37-1/2" width, chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 37-1/2" width,...

Seamless steel tubing for strength and smooth finish.
Knurled and slotted for internal wiring.
Accepts OEM heated grips.
Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 25.4 mm clamp, 25.5 cm rise, Black gloss

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 25.4 mm clamp, 25.5 cm rise, Black...

Seamless steel tubing, knurled and slotted center for internal wiring, accepts OEM heated grips. Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 1" clamp, 12" rise, 37-1/2" width, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 12" rise, 37-1/2" width,...

Classic ape hanger styling with seamless tubing, internal wiring routing, and compatibility with OEM heated grips. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — Rise 12", Width 37-1/2", Clamp 1", Black gloss

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 12", Width 37-1/2", Clamp 1",...

Seamless steel tubing with knurled, slotted center for internal wiring. Accepts OEM heated grips. Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 14" rise, 1" clamp, 37-3/4" width, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 1" clamp, 37-3/4" width,...

Seamless steel tubing; knurled and slotted for internal wiring; accepts OEM heated grips; made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 37-3/4" width, Gloss black

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 37-3/4" width,...

Seamless steel tubing; Knurled and slotted for internal wiring; Accepts OEM heated grips; Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 1" clamp, 16" rise, 38-1/4" width, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 16" rise, 38-1/4" width,...

Classic ape-hanger styling with seamless tubing and knurled, slotted center for internal wiring. Accepts OEM heated grips and supports throttle-by-wire fitment.

€127.25 €172.28

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls