Handlebars & Controls (31)

1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width, Black

-€64.81

TODD'S CYCLE 1-1/4" Beater Bar — 1" clamp, 1-1/4" diameter, 33-3/4" width,...

Classic narrow beater bar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€252.06 €316.87

-€7.54
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left upper, 2-button, 60 in leads, Chrome

OEM-replacement handlebar switch kit with color-coded leads, black protective sleeves and 60" leads. Individual switches available separately. Fits U.S.A. and International models.

€21.31 €28.85

$1-1/4\" Beater Bar — 1-1/4\" diameter, 33-3/4\" width, 1\" clamp$

-€68.06

TODD'S CYCLE 1-1/4\" Beater Bar — 1-1/4\" diameter, 33-3/4\" width, 1\" clamp

Classic straight, narrow beater handlebar with a comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€264.66 €332.72

-€4.62
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Left lower, Chrome

OEM-replacement handlebar switch kit with color-coded leads and 60" leads; individual switches sold separately.

€13.07 €17.69

-€61.52

TODD'S CYCLE 1-1/4" Beater Bar — 30-1/2" width, 1-1/4" clamp, polished

Classic, simple beater bar with a comfortable wrist angle. Slotted for internal wiring, pre-drilled and knurled at the center. Made in the U.S.A.

€239.20 €300.72

-€13.39

DRAG SPECIALTIES Slotted Wide Blade Lever Set — Hydraulic actuation, Chrome, Pair

Wide blade lever set with CNC-machined slots; includes anti-rattle clip and clutch lever pivot bushings.

€37.84 €51.23

-€68.06

TODD'S CYCLE 1-1/4" Beater Bar — 1-1/4" clamp, 30-1/2" width, 4-3/4" pullback

Classic beater handlebar with a narrow, straight profile and comfortable wrist angle; slotted for internal wiring. Made in the U.S.A.

€264.66 €332.72

-€11.69

DRAG SPECIALTIES Wide Blade Lever Set — Chrome

Late-style wide, flat lever set with lightweight construction and OEM perch compatibility.

€33.06 €44.75

-€6.44

DRAG SPECIALTIES Pivot Pin/Clip Kit — 10-pack, Chrome

Replacement hardware kit for pivot assemblies; includes clips and fasteners.

€18.18 €24.62

-€3.31

DRAG SPECIALTIES Standard Clutch/Brake Lever — Chrome

Direct-fit replacement for '65 Panhead clutch and brake controls. Simple swap for routine service.

€9.35 €12.66

-€2.32

DRAG SPECIALTIES Standard Clutch/Brake Lever — Polished

Fits '65 Panhead clutch and brake controls for a direct replacement.

€6.52 €8.84

-€2.28
Out of Stock

DRAG SPECIALTIES Standard Hydraulic Brake Lever — Polished Silver

Standard-length brake lever with ergonomic reach and smooth modulation for reliable control.

€6.44 €8.72

-€3.31

DRAG SPECIALTIES Standard Hydraulic Brake Lever — Chrome

Durable brake lever with ergonomic shape for improved control and reduced hand fatigue.

€9.35 €12.66

-€3.22

DRAG SPECIALTIES Comfort Grip™ Brake Lever — Chrome, Aluminum

Offset lever design for easy and confident braking control.

€9.10 €12.32

-€0.90
Out of Stock

DRAG SPECIALTIES Pivot Pin Bushing — 10-pack, Brake/Clutch

Replaces worn bushings on clutch and brake levers to restore smooth lever action and reduce play.

€2.56 €3.46

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€43.33

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€122.49 €165.82

Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

-€4.13

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

Accepts OEM-style switches and wiring.

Switches and switch clamps sold separately.

€11.66 €15.79

Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

-€4.53

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

Handlebar switch housing kit accepts OEM-style switches and wiring. Brake and clutch controls, switches, and clamps are sold separately.

€12.84 €17.37

-€4.70

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar, chrome

Polished brake and clutch controls with die-cast switch housings; accepts OEM-style switches and wiring. Switches and clamps sold separately.

€13.26 €17.96

-€5.34

DRAG SPECIALTIES Clutch Lever Bracket — Left, Chrome

Precision clutch lever bracket providing dependable actuation and straightforward installation.

€15.07 €20.41

-€4.10

DRAG SPECIALTIES Replacement Master Cylinder Cap — Rear, Chrome

Replacement cap for brake master cylinders that restores a secure fluid seal and resists corrosion.

€11.63 €15.73

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€64.43

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€182.09 €246.52

-€53.06

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€149.97 €203.03

-€57.43

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€162.27 €219.70

1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm width, Chrome

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 28 cm rise, 81.5 cm...

Strip-style handlebar with polished welds, internal wiring slots and throttle notch; requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 28 cm rise, 81.5 cm (32") width

-€84.83

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 28 cm rise, 81.5 cm...

Strip-style handlebar with slotted internal wiring, notched for electronic throttle, polished welds, and OEM heated grip compatibility.

€329.90 €414.73

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm (33-1/4") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 84.5 cm...

Strip handlebar with polished welds, slotted for internal wiring, notched for electronic throttle, pre-drilled and compatible with OEM heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls