Handlebars & Controls (31)

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section, Chrome

-€97.47
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center section,...

Patented internal Viking design for easy full-harness routing; preloaded with E‑Z pull‑thru sleeving; CNC mandrel bends and machined control mounts.

€366.17 €463.64

-€6.68
Out of Stock

DRAG SPECIALTIES Replacement Gaskets — Master cylinder, Rear, 5-pack, Black

Durable replacement gaskets for brake cover kits that prevent leaks and ensure a proper seal.

€18.90 €25.58

1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 25.4 mm clamp, Chrome

-€88.14
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 12" center, 25.4 mm...

Patented internal Viking design provides generous, burr-free wiring clearance and ships preloaded with E-Z pull-thru sleeving for fast, clean harness routing. CNC mandrel bends, machined control mounts, electronic throttle control slots, and high-luster finish. Not for use with stock risers or handlebar clamp/gauge mount clamp on 883C and 1200C models.

€331.15 €419.29

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width, 1" clamping diameter, Chrome

-€97.47
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center width,...

Patented internal routing for easy, damage-free wiring. Preloaded E-Z pull-thru sleeving, burr-free internal radius, and machined control mounts for a clean installation. Not compatible with stock risers on 883C and 1200C models.

€366.17 €463.64

-€97.47
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, Chrome

Patented internal routing and E‑Z pull-thru sleeving make wiring installations fast and damage-free. Premium CNC mandrel bends and machined mounts for a high-luster finish.

€366.17 €463.64

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, 1" clamping diameter, Black gloss

-€87.71
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented Viking handlebar with internal wiring routing and preloaded E‑Z pull‑thru sleeving. CNC mandrel bends, machined control mounts, knurled center; fits 1" risers. Not for stock risers or clamp/gauge mount on 883C/1200C.

€329.50 €417.21

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 36-1/4" width, Black gloss

-€103.70
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 36-1/4"...

Patented internal design for effortless wiring installs; preloaded E‑Z pull‑thru sleeving, CNC mandrel bends, machined control mounts, pre-drilled and knurled center for reliable fit.

€403.28 €506.98

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" clamp, 36-3/4" width

Patented Viking internal design for easy wiring installs; burr-free wiring holes, machined mounts, knurled center; fits standard controls including hydraulic clutch.

€364.35 €461.34

1-1/4" Viking Handlebar — 1-1/4" dia, 1" center, 3-1/2" clamp, Gloss black

-€87.71
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" dia, 1" center, 3-1/2" clamp,...

Patented internal routing design simplifies wiring installations without chafing. Burr-free internal radius and preloaded pull‑thru sleeving for quick harness routing. Precision CNC mandrel bends and machined control mounts for a refined fit and finish. Not compatible with stock risers on select models (883C, 1200C).

€329.50 €417.21

-€27.64
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4") bore, chrome polished

Complete rear master cylinder assembly, fully assembled for easy installation.

€78.10 €105.74

1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center, 1" clamping, Black gloss

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 12" center, 1"...

Patented internal routing with preloaded E‑Z sleeving for fast wiring, CNC mandrel bends and machined mounts for a clean, serviceable finish.

€364.35 €461.34

-€96.99
Out of Stock

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 32 mm (1-1/4"), 1" clamp, Black gloss

Patented Viking internal design for easy wiring installations; preloaded E‑Z pull‑thru sleeving; machined control mounts; high-luster gloss finish.

€364.35 €461.34

Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

-€8.31
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder Cover Kit — Chrome, 78073C

Enhances protection and appearance of the brake fluid reservoir. Includes gasket and mounting screws.

€23.47 €31.78

-€11.08
Out of Stock

DRAG SPECIALTIES Solo Rear Master Cylinder Rebuild Kit — 14 mm (9/16"), Black

Custom rebuild kit with seals, springs, guides and snap ring. Mounting holes 1-3/16" center-to-center.

€31.33 €42.41

-€48.34
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — Silver

Complete, fully assembled rear master cylinder ready to install and restore braking performance.

€136.59 €184.93

-€48.34
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — Rear, Black

Complete rear master cylinder assembly, fully assembled for easy installation.

€136.59 €184.93

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome polished$

-€47.56
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Rear, Chrome...

Complete rear master cylinder assembly; fully assembled for easy installation. Ideal for maintenance and replacement.

€134.42 €181.98

Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

-€47.56
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4 in), black

Complete brake assembly, fully assembled for easy installation and quick replacement.

€134.42 €181.98

Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear, Black/Silver

-€9.24
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder Rebuild Kit — 19.1 mm (3/4"), Rear,...

Rebuild kit for rear brake master cylinders; fits various H-D models, meets or exceeds OEM specs, includes metal piston.

€26.11 €35.35

-€42.75
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — Chrome, Polished

Complete rear master cylinder assembly. Fully assembled for easy installation.

€120.82 €163.57

-€42.75
Out of Stock

DRAG SPECIALTIES Rear Brake Master Cylinder — Black, B17-655MB

Complete hydraulic assembly, fully assembled for fast installation.

€120.82 €163.57

-€7.02
Out of Stock

DRAG SPECIALTIES Rear Master Cylinder Cover — Blue, Chrome

Precision accessory that protects the master cylinder reservoir with a low-profile design and easy installation.

€19.84 €26.86

-€4.48
Out of Stock

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Precision-machined protector for the brake fluid reservoir. Bolt-on installation using existing hardware; durable finish and reliable sealing.

€12.69 €17.17

-€7.02
Out of Stock

DRAG SPECIALTIES Rear Master Cylinder Cover — Black

Protects the hydraulic control assembly from debris and moisture. Precision-fit with a corrosion-resistant finish. Easy bolt-on installation.

€19.84 €26.86

Cut-Down Front Brake Master Cylinder — 17.5 mm (11/16"), chrome

-€54.65
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 17.5 mm (11/16"), chrome

Cut-down front brake master cylinder trimmed by .256"; includes mounting clamp and brake lever. Not for non-clearanced 1-1/4"/1-1/2" handlebars.

€154.48 €209.13

Cut-Down Front Brake Master Cylinder — 5/8" (15.9 mm) bore, front mount, chrome

-€54.65
Out of Stock

DRAG SPECIALTIES Cut-Down Front Brake Master Cylinder — 5/8" (15.9 mm) bore,...

Cut-down master cylinder lowers profile; die-cast aluminum construction. Includes mounting clamp and brake lever. Not for use with non-clearanced 1-1/4" or 1-1/2" handlebars.

€154.48 €209.13

-€6.63
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Right lower, Chrome, 1 button

OEM-replacement handlebar switch kit with color-coded leads and black protective sleeves. 60" leads. Individual switches sold separately. Fits U.S.A. and international models.

€18.75 €25.38

-€10.04
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — upper-left mount, 2-button, Chrome

OEM-replacement switch kit with color-coded leads and black protective sleeves. 60" leads. Individual switches available separately.

€28.35 €38.39

-€10.78
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Right upper mount, 2-button, Chrome

OEM-replacement switch kit with color-coded leads and black protective sleeves. Includes 60" leads. Individual switches sold separately.

€30.45 €41.23

-€6.50
Out of Stock

DRAG SPECIALTIES Handlebar Switch Kit — Right lower mount, 1-button, black

OEM-replacement handlebar switch kit with color-coded leads, black protective sleeves, and 60" leads.

€18.36 €24.86

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls