Handlebars & Controls (30)

-€2.32
Out of Stock

DRAG SPECIALTIES Standard Clutch/Brake Lever — Fits '65 Panhead, Polished

Fits '65 Panhead clutch and brake controls. Standard replacement lever for classic restorations.

€6.52 €8.84

-€2.28
Out of Stock

DRAG SPECIALTIES Standard Hydraulic Brake Lever — Polished Silver

Standard-length brake lever with ergonomic reach and smooth modulation for reliable control.

€6.44 €8.72

-€3.31
Out of Stock

DRAG SPECIALTIES Standard Hydraulic Brake Lever — Chrome

Hydraulic brake lever providing smooth, responsive actuation and ergonomic control.

€9.35 €12.66

-€3.22
Out of Stock

DRAG SPECIALTIES Comfort Grip™ Brake Lever — Chrome finish, Aluminum

Lightweight clutch and brake lever with an offset for easier reach and smoother operation.

€9.10 €12.32

-€0.90
Out of Stock

DRAG SPECIALTIES Pivot Pin Bushing — 10-pack, Brake/Clutch

Replaces worn bushings on clutch and brake levers to restore smooth lever action and reduce play.

€2.56 €3.46

Handlebar Control Kit — 19.1 mm bore, 25.4 mm clamp, chrome

-€43.33
Out of Stock

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm bore, 25.4 mm clamp, chrome

Complete aluminum handlebar control kit. Uses OEM switches or equivalent (not included). Replacement parts sold separately.

€122.49 €165.82

Handlebar Switch Housing Kit — 25.4 mm (1") , Chrome

-€4.13
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") , Chrome

Brake and clutch switch housings with OEM-style clamps; accepts OEM switches and wiring. Master cylinder accepts OEM rebuild kits. Switches sold separately.

€11.66 €15.79

-€4.53
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

Handlebar switch housing kit accepts OEM-style switches and wiring. Brake and clutch controls, switches, and clamps are sold separately.

€12.84 €17.37

-€4.70
Out of Stock

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1") , chrome

Switch housing kit for brake and clutch controls with die-cast housings and OEM-style clamps. Switches and clamps sold separately.

€13.26 €17.96

-€5.34
Out of Stock

DRAG SPECIALTIES Clutch Lever Bracket — Left, Chrome

Precision clutch lever bracket providing dependable actuation and straightforward installation.

€15.07 €20.41

-€4.14
Out of Stock

EASTERN MOTORCYCLE PARTS Brake Pad Dowel Pins — Front/Rear, 10-pack

Precision dowel pins for accurate brake pad alignment. Durable construction and straightforward installation for reliable brake performance.

€11.67 €15.81

-€4.10
Out of Stock

DRAG SPECIALTIES Replacement Master Cylinder Cap — Rear, Chrome

Replacement cap for brake master cylinders that restores a secure fluid seal and resists corrosion.

€11.63 €15.73

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.498 in bore, 3-13/16 in stroke, aluminum

-€75.64
Out of Stock

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Replacement cylinders for XL Evolution‑Style Motors with ductile cast‑iron sleeves in aluminum castings; external ribs lock the sleeve to the casting; finished slightly undersized for final honing.

€213.76 €289.40

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33
Out of Stock

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86
Out of Stock

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€64.43
Out of Stock

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€182.09 €246.52

-€53.06
Out of Stock

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€149.97 €203.03

-€57.43
Out of Stock

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€162.27 €219.70

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 32" width, 11" rise, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 32" width, 11"...

Strip-style ape hanger handlebar with polished welds; slotted for internal wiring; notched for throttle-by-wire; pre-drilled; accepts heated grips; requires special risers and clamps; made in the United States.

€346.41 €435.48

1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise, 32" width, Flat Black

-€84.83
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping diameter, 11" rise,...

Strip-style handlebar with concealed wiring, polished welds and throttle notches. Requires special risers and clamps; works with OEM heated grips.

€329.90 €414.73

$1-1/2\" Strip Handlebar — 38 mm clamp, 15\" rise, Chrome$

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2\" Strip Handlebar — 38 mm clamp, 15\" rise, Chrome

Strip handlebar with polished welds, slotted for internal wiring and notched for electronic throttle. Pre-drilled and accepts heated grips. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width, 38 cm (15") rise, black flat

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 84.5 cm (33-1/4") width,...

Strip-style handlebar with polished welds, internal wiring slots, and notched throttle cutout. Works with OEM heated grips and requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35") width, Chrome

-€89.07
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 89 cm (35")...

Strip-style handlebar with internal wiring routing, throttle notches, polished welds and pre-drilled controls. Requires special risers and clamps.

€346.41 €435.48

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 35" (89 cm) width, Gloss black

-€82.94
Out of Stock

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamping, 35" (89 cm)...

Strip handlebar with internal wiring slots and a throttle notch. Polished welds, accepts OEM heated grips; requires special risers and clamps. Made in the U.S.A.

€322.53 €405.47

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Chrome

Classic ape-hanger styling with a knurled, slotted center for internal wiring and OEM heated grips. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Black gloss

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Black...

Classic ape-hanger styling with internal wiring, knurled center, slotted for throttle-by-wire, accepts OEM heated grips. Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 12" rise, 38" width, Chrome

Tall Ape Hanger handlebar with a knurled, slotted center for internal wiring; accepts OEM heated grips and made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 12" rise, 38" width, 1" clamp, black gloss

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width, 1" clamp, black...

A high-rise ape hanger handlebar with knurled center and internal wiring; accepts OEM heated grips and is built for durable, reliable fitment.

€101.02 €136.77

1" Ape Hanger Handlebar — 14" rise, 38" width, 1" clamp, Chrome

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 38" width, 1" clamp, Chrome

Classic Ape Hanger profile with knurled center for internal wiring and compatibility with OEM heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width, gloss black

-€35.75
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width, gloss...

Classic ape hanger shape with seamless steel tubing, knurled center, slotted for internal wiring, accepts OEM heated grips. Made in the USA.

€101.02 €136.77

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls