Handlebars & Controls (30)

$Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\") clamp, Chrome$

-€43.33

DRAG SPECIALTIES Handlebar Control Kit — 19.1 mm (3/4\") bore, 25.4 mm (1\")...

Aluminum handlebar control kit. Uses OEM or equivalent switches (switches not included). Replacement parts sold separately.

€122.49 €165.82

Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

-€4.13

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" (25.4 mm), Chrome

Accepts OEM-style switches and wiring.

Switches and switch clamps sold separately.

€11.66 €15.79

Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

-€4.53

DRAG SPECIALTIES Handlebar Switch Housing Kit — 25.4 mm (1"), Chrome

Handlebar switch housing kit accepts OEM-style switches and wiring. Brake and clutch controls, switches, and clamps are sold separately.

€12.84 €17.37

-€4.70

DRAG SPECIALTIES Handlebar Switch Housing Kit — 1" handlebar, chrome

Polished brake and clutch controls with die-cast switch housings; accepts OEM-style switches and wiring. Switches and clamps sold separately.

€13.26 €17.96

-€5.34

DRAG SPECIALTIES Clutch Lever Bracket — Left, Chrome

Precision clutch lever bracket providing dependable actuation and straightforward installation.

€15.07 €20.41

-€4.10

DRAG SPECIALTIES Replacement Master Cylinder Cap — Rear, Chrome

Replacement cap for brake master cylinders that restores a secure fluid seal and resists corrosion.

€11.63 €15.73

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

$Cylinder — 1200 cc, bore 3.435\", front, Black$

-€64.43

DRAG SPECIALTIES Cylinder — 1200 cc, bore 3.435\", front, Black

Cast-iron cylinder that meets or exceeds OEM tolerances and withstands greater pressure and heat than stock.

€182.09 €246.52

-€53.06

DRAG SPECIALTIES Cylinder — 3.435" bore, 74 ci, Black

Cast-iron cylinder that meets or exceeds OEM tolerances. Withstands greater pressure and heat than stock components.

€149.97 €203.03

-€57.43

DRAG SPECIALTIES Cylinder — 3.435", 74"

Cast-iron cylinder meets or exceeds OEM tolerances and resists higher pressure and heat for improved durability.

€162.27 €219.70

1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — Rise 10", Width 38", Clamp 1", Chrome

Knurled, slotted Ape Hanger handlebar with internal wiring and OEM heated-grip compatibility. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Black gloss

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 10" rise, 38" width, Black...

Classic ape-hanger styling with internal wiring, knurled center, slotted for throttle-by-wire, accepts OEM heated grips. Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 12" rise, 38" width

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width

Seamless steel ape hanger with knurled center and internal wiring; accepts OEM heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 12" rise, 38" width, 1" clamp, black gloss

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 12" rise, 38" width, 1" clamp, black...

A high-rise ape hanger handlebar with knurled center and internal wiring; accepts OEM heated grips and is built for durable, reliable fitment.

€101.02 €136.77

1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp diameter

-€45.03
Out of Stock

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 14" rise, 13" center width, 1" clamp...

Seamless steel tubing ape hanger with knurled center, slotted for internal wiring and compatible with heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width, gloss black

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 14" rise, 38" width, gloss...

Classic ape hanger shape with seamless steel tubing, knurled center, slotted for internal wiring, accepts OEM heated grips. Made in the USA.

€101.02 €136.77

1" Ape Hanger Handlebar — 16" rise, 1" clamp, 38" width, Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 16" rise, 1" clamp, 38" width, Chrome

Seamless steel ape hanger handlebar with knurled center and slots for internal wiring; accepts OEM heated grips.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

-€45.03

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width, Chrome

Ape Hanger handlebar with knurled center and slotted design for internal wiring, compatible with OEM heated grips. Made in the USA.

€127.25 €172.28

1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

-€35.75

DRAG SPECIALTIES 1" Ape Hanger Handlebar — 1" clamp, 18" rise, 38" width

Seamless, knurled Ape Hanger handlebar with slots for internal wiring and support for OEM heated grips.

€101.02 €136.77

Buck-50 Handlebar — 36-5/8" width, 9-1/2" rise, 1-1/2" diameter, 1" clamp, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 36-5/8" width, 9-1/2" rise, 1-1/2"...

Stepped Buck-50 handlebar with knurled center and notched throttle-by-wire; fits factory heated grips and installs without fairing modifications.

€414.80 €521.46

Buck-50 Handlebar — 25.4 mm clamp, 38 mm bar, 93.5 cm width, 29 cm rise, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 25.4 mm clamp, 38 mm bar, 93.5 cm width,...

Aggressive ape-hanger style with stepped design, clean wiring cutouts, diamond-knurled center, and factory heated-grip compatibility.

€414.80 €521.46

$Buck-50 Handlebar — 1-1/4\" clamp, 1-1/2\" diameter, 35-1/8\" width, 10\" rise, Chrome$

-€106.66

KHROME WERKS Buck-50 Handlebar — 1-1/4\" clamp, 1-1/2\" diameter, 35-1/8\"...

Stepped design fits factory clamp and perches; notched for throttle-by-wire; diamond-knurled center for no-slip clamping; accepts H-D OEM heated grips.

€414.80 €521.46

Buck-50 Handlebar — 90 cm (35.5") width, 30 cm rise, 32 mm clamp, Chrome

-€106.66

KHROME WERKS Buck-50 Handlebar — 90 cm (35.5") width, 30 cm rise, 32 mm...

Stepped design for factory clamp and perches; aggressive riding position; clean cutouts for easy wiring; notched for throttle-by-wire; diamond-knurled center; accepts heated grips.

€414.80 €521.46

Buck-50 Handlebar — 36-7/8" W, 11-1/2" rise, 1-1/2" dia, 1" clamp, Black gloss

-€106.66

KHROME WERKS Buck-50 Handlebar — 36-7/8" W, 11-1/2" rise, 1-1/2" dia, 1"...

Stepped design for factory clamp and perches, notched for throttle-by-wire, diamond-knurled center, accepts factory and H-D OEM heated grips.

€414.80 €521.46

Buck-50 Handlebar — 89 cm (35-1/8") width, 25 cm (9-3/4") rise, 32 mm clamp

-€106.66

KHROME WERKS Buck-50 Handlebar — 89 cm (35-1/8") width, 25 cm (9-3/4")...

Stepped design for use with factory clamp and perches, notched for electronic throttle control, and diamond knurling for no-slip clamping. Made in the USA.

€414.80 €521.46

Street-X Handlebars — 30-1/8 in width, 59 mm rise, 1 in clamp, Black gloss

-€36.36

KHROME WERKS Street-X Handlebars — 30-1/8 in width, 59 mm rise, 1 in clamp,...

Notched for throttle-by-wire; large machined drill outs for internal wiring; knurled center mounting area; super strong and lightweight.

€141.38 €177.74

1" 2+2 Custom Sweeper Handlebar — Rise 13-1/2", Width 31-3/4", Clamp 1", Gloss Black

-€40.24
Out of Stock

KHROME WERKS 1" 2+2 Custom Sweeper Handlebar — Rise 13-1/2", Width 31-3/4",...

2" taller Sweeper bar with notched throttle end and milled internal wiring for ETC. Dimpled and knurled center. Made in the U.S.A.

€156.45 €196.69

1-1/4" Touring Handlebar — 1-1/4" clamp, Chrome, 34-3/4" wide

-€86.41

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, Chrome, 34-3/4" wide

Direct bolt-on upgrade for Road Glide models. Knurled center, accepts H-D heated grips, works with stock controls.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" (32 mm) diameter, 34-3/4" (88.5 cm) width, 10" (25.5 cm) rise, Black Gloss

-€70.79

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" (32 mm) diameter, 34-3/4"...

Direct bolt‑on upgrade for Road Glide. Includes control clamps to replace oversize OEM clamps, knurled center for extra grip, accepts H-D OEM heated grips, and works with stock controls and TBW or cable throttles. Made in the U.S.A.

€200.05 €270.84

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls